The Riverstone 199-01 exam dumps contain the training materials that happen to be easily comprehend and needed to the 199-01 real exam. Our Riverstone products are extremely popular inside the market along with enjoy the high reputation. Many candidates get achieved good results by using Pass4sure Riverstone 199-01 exam questions and answers. The professionals provide a few 199-01 questions which make an effort to evaluate yourself in your house and find out the weak aspects of your respective studies. All the Riverstone Riverstone 199-01 training materials are generally most genuine, accurate along with logical. Our seasoned experts keep the 199-01 dumps up-to-date and verified just before publishing. You can be full involving confidence in the Riverstone 199-01 exam soon after preparing this with the Riverstone online education course.
2021 Sep 199-01 real exam
Q131. The primary purpose of setting proxies (found on Networking Proxies) on the Interceptor is to:
A. Allow for a Web or FTP proxy when specifying a URL on the Management Console or CLI
B. Allow for another Interceptor to redirect on behalf of the current Interceptor
C. Allow for Steelhead appliances to dynamically handle the load of another Steelhead appliance
D. Allow for two Interceptor appliances to act redundantly in a serial configuration
Answer: A
Q132. For a Steelhead Mobile solution to work properly, what port needs to be allowed by the device that Steelhead Mobile is installed on?
A. 7800
B. 7810
C. 7801
D. 7830
E. 7840
Answer: C
Q133. Refer to the exhibit.
Traffic going from Corp-A-DC-2 towards Corp-B will always use Link-1. Traffic from Corp-B back to Corp-A-DC-1 may traverse Corp-A-DC-1, over the GigaMAN before it reaches Corp-A-DC-2. No TCP connections are initiated from Corp-B to either Corp-A-DC-1 or Corp-A-DC-2. Unfortunately, the customer does not have any money to purchase any additional Steelheads. What are some possible fixes to ensure optimization occurs while Link-1 is operational? (If Link-1 ceases to function, optimization is not possible.) (Select 2)
A. Configure a fixed-target rule on the Corp-A-DC-2 Steelhead pointing to the Corp-B Steelhead on port 7800
B. On the Corp-B Steelhead, enable "in-path probe direct"
C. On the Corp-A-DC-2 Steelhead, enable "in-path probe direct"
D. Configure the Corp-A-DC-2 Steelhead to inject a route into the network
E. Enable Full Transparency
Answer: AC
Q134. Two Steelhead appliances deployed in-path at different offices cannot auto-discover each other. What technique can be used to "force" the two Steelhead appliances to optimize traffic between each other?
A. Change the TCP port the Steelhead appliances use for their in-path connections to 7810
B. Disable the auto-discovery feature on the Steelhead appliances
C. Create auto-discovery rules that map to each Steelhead appliance's in-path IP address
D. Create fixed-target rules on each Steelhead appliance using the in-path IP address of the other Steelhead appliance, and use port 7800
E. Use the "enable probe" command from the CLI
Answer: D
Q135. You are configuring HighSpeed TCP in an environment with an OC-3 (155Mb/s) and 60 milliseconds of round-trip latency. You know that the rule of thumb is to set the Steelhead appliance's WAN Default Send Buffer Size and WAN Default Receive Buffer Size to 2*BDP for the link. The buffer size setting for this link would be closest to: (Hint: Use the calculator)
A. 4,665,000 bytes
B. 9,330,000 bytes
C. 3,110 bytes
D. 6,220 bytes
E. 2,325,000 bytes
Answer: E
Renew 199-01 exam fees:
Q136. What is the priority bit order for WCCP MASK?
A. Source port, source IP, destination port, destination IP
B. Destination port, source port, destination IP, source IP
C. Source IP, destination port, destination IP, source port
D. Source port, destination port, source IP, destination IP
E. There is no priority order. It is weighted through bit assignments.
Answer: D
Q137. When using Correct Addressing and enhanced auto-discovery (EAD), what is the size of the probe response in the return SYN/ACK packet from the server?
A. 4 bytes
B. 10 bytes
C. 14 bytes
D. 18 bytes
E. 32 bytes
Answer: D
Q138. Peer affinity is most closely related to:
A. Parallel Interceptor redirection based on Sport ID and client IP
B. Serial Interceptor redirection based on Sport ID to server
C. Segstore ID Steelhead mapping based on Sport ID of Steelhead appliances
D. The shipyard from which Riverbed is most likely to ship Interceptors
Answer: C
Q139. A customer with a new physical in-path installation decides to turn on the optimization service during lunch time on a working day. This is done so that he can see if the users perceive any performance improvement. When starting the optimization service, he does not enable the in-path kickoff option. Assuming there were several already active connections when he starts the optimization service, how will the Steelhead appliances handle these existing connections?
A. The Steelhead appliance will optimize all connections, including pre-existing
B. The Steelhead appliance will pass-through all pre-existing connections, leaving them un- optimized
C. The Steelhead appliance will reset all pre-existing connections, thus automatically changing their optimization status from un-optimized to optimized
D. The Steelhead appliance will list the connections as "pre-existing" on the Current Connections page
E. Both B and D
F. Both C and D
Answer: E
Q140. You would like your Steelhead Mobile clients to automatically detect when they are in a branch office with a local Steelhead. You have decided that the Steelhead Mobile Client should only optimize connections if the Steelhead appliance is more than 10 ms away. What is the name of the feature you need to enable?
A. Adapter location awareness
B. Latency licensing awareness
C. Optimization awareness
D. Branch office self-awareness
E. Latency-based location awareness
Answer: E