Act now and download your Symantec 250-513 test today! Do not waste time for the worthless Symantec 250-513 tutorials. Download Avant-garde Symantec Administration of Symantec Data Loss Prevention 12 exam with real questions and answers and begin to learn Symantec 250-513 with a classic professional.
2021 Sep 250-513 exam answers
Q11. - (Topic 2)
You have created a set of volumes within a disk group.
What is the size of a volume that displays a length of 20480 in a vxprint output, on a Solaris system?
A. 10 megabytes
B. 15 megabytes
C. 20 megabytes
D. 25 megabytes
Answer: A
Q12. - (Topic 3)
You have the hot-relocation feature enabled on your Storage Foundation Server. However, you are getting a disk failure error and you want to resolve the problem by using the vxrelocd daemon. Identify the correct sequence of steps that you will perform to resolve this problem?
1. Inform the administrator regarding the failed disk by electronic mail.
2. Initiate the appropriate recovery procedures.
3. Detect the failure by vxrelocd daemon to the failed disk.
4. Determine if any subdisks can be relocated.
A. 2,4,1,3
B. 2,1,3,4
C. 4,1,2,3
D. 4,3,1,2
Answer: A
Q13. - (Topic 2)
Which is a limitation of using CDS disk layout under VxVM 4.0 or above?
A. The CDS format cannot contain a private region and a public region on a single partition.
B. The CDS format cannot be used with hardware RAID controllers.
C. The CDS format cannot be used in conjunction with OS-level partitioning.
D. The CDS format cannot be used for boot disks.
Answer: D
Q14. - (Topic 3)
An I/O error has corrupted multiple plexes of a mirrored volume and has not left any plex CLEAN or ACTIVE. You are required to mark one of the plexes CLEAN and point the system to use that plex as the source for reviving the other plexes.
How should you resolve this error?
A. Use the vxmend –g <diskgroup> command with the fix stale plex option.
B. Use the vxplex –g <diskgroup> command with the att plex volume option.
C. Use the vxmend –g <diskgroup> command with the on plex option.
D. Use the vxmend –g <diskgroup> command with the fix clean plex option.
Answer: D
Q15. - (Topic 3)
You were working with Veritas Volume Manager and the Volume Manager failed due to disk failure. You are required to recover the Veritas Volume Manager Configuration.
Identify the correct sequence of actions that you would perform in this situation.
1. Reinstall the operating system
2. Replace the failed disk
3. Recover the VxVM configuration
4. Add the Volume Manager Packages
5. Startup Hot-relocation 6. Clean up the system configuration
A. 4,3,2,6,1,5
B. 3,6,1,5,2,4
C. 2,1,4,3,6,5
D. 6,2,1,4,5,3
Answer: C
Up to the immediate present 250-513 exam answers:
Q16. - (Topic 2)
You are required to change a volume named vol1 in disk group mydg1 from a RAID-5 volume layout to a mirror-stripe (RAID 0+1) volume layout. You want to follow the correct procedure to change the volume layout. Which sequence of commands would you follow to achieve this goal?
A. vxassist -g mydg1 relayout vol1 layout=stripe-mirror vxassist -g mydg1 convert vol1 layout=mirror-stripe
B. vxassist -g mydg1 relayout vol1 layout=mirror-stripe
C. vxassist -g mydg1 convert vol1 layout=stripe-mirror vxassist -g mydg1 relayout vol1 layout=mirror-stripe
D. vxassist -g mydg1 convert vol1 layout=mirror-stripe
Answer: A
Q17. - (Topic 1)
You have just started a relayout job on a large volume, and your work is interrupted by an unrelated server outage. Site policy requires that the relayout should be completed or rolled back within its scheduled window. You want to stop the relayout and roll back the incomplete changes so that the VxVM configuration is left stable till the relayout can be rescheduled.
What would you do to perform this task?
A. You cannot undo a relayout operation until it completes.
B. You can reverse the volume to its original layout by using "vxrelayout reverse"
C. You can stop the process running the vxrelayout task; VxVM will automatically clean up after the relayout.
D. You can stop the relayout job with vxtask abort, and then reverse the volume to its original layout by using vxrelayout.
Answer: D
Q18. - (Topic 3)
A DLP administrator needs to stop the PacketCapture process on a detection server. Upon inspection of the Server Detail page, the administrator discovers that all processes are missing from the display. Why are the processes missing from the Server Detail page display?
A. The detection server Display Control Process option is disabled on the Server Detail page.
B. The Display Process Control setting on the Advanced Settings page is disabled.
C. The detection server PacketCapture process is displayed on the Server Overview page.
D. The Advanced Process Control setting on the System Settings page is deselected.
Answer: D
Q19. - (Topic 2)
When you are working on Veritas Storage Foundation for Oracle, the vxdbd daemon reports an error: "VXDBA_PRODUCT exec_remote ERROR V-81-7700 Can not connect to the vxdbd". You must resolve this error with minimum administrative effort.
What should you do? (Each correct answer presents part of the solution. Select two.)
A. Define a HOME directory for the vxdbd daemon.
B. Restart the vxdbd daemon.
C. Change the port of VXDBD_SOCKET and restart the vxdbd daemon.
D. Restart the Veritas Storage Foundation for Oracle server.
Answer: B,C
Q20. - (Topic 1)
An incident response team has determined that multiple incidents are resulting from the same user action of copying sensitive data to USB devices.
Which action should the incident response team take to fix this issue so only one incident per action is detected?
A. create separate policies for the different detection methods
B. combine multiple conditions into one compound rule
C. change which 'Endpoint Destinations' are monitored
D. change the monitor/ignore filters in the agent configuration
Answer: B