VMware 2V0-01.19 Preparation 2021

NEW QUESTION 1
VMware vRealize Log Insight can be configured to send notification events to which endpoint?

• A. vRealize Configuration Manager
• B. vRealize Operations Manager
• C. vRealize Infrastructure Navigator
• D. vCenter Server

Answer: B

NEW QUESTION 2
What three steps must be taken when removing a host from a vSAN-enabled cluster? (Choose three.)

• A. Remove VMkernel port with vSAN traffic checkbox checked.
• B. Remove the host from vSAN cluster.
• C. Remove disks from diskgroups, remove disk groups.
• D. Place the host into maintenance mode with Full Migration option selected.
• E. Create at least one vSphere Standard Switch.

Answer: BCD

NEW QUESTION 3
When trying to export the vApp to the OVF, the option is grayed out. What solution allows for the export of a vApp?

• A. The vApp is marked as Non-Exportable.
• B. Logout of the vSphere Client and use the vSphere WebClient.
• C. Change the portgroup where the VMs are connected to.
• D. PowerOff the vApp.

Answer: D

Explanation:
Reference https://communities.vmware.com/thread/408957

NEW QUESTION 4
What three steps are necessary to enable Jumbo Frames for use with an iSCSI storage array? (Choose three.)

• A. Configure the MTU on the VMKernel port.
• B. Configure the MTU on the virtual switch.
• C. Configure the MTU on the physical switch.
• D. Configure the MTU on the LAG group.
• E. Configure the MTU on the VTEP.

Answer: ABC

NEW QUESTION 5
What load balancing appliance does VMware recommended for deploying a vRealize Log Insight cluster?

• A. F5 Big-IP
• B. Citrix NetScaler
• C. VMware NSX Load Balancer
• D. Integrated Load Balancer

Answer: D

NEW QUESTION 6
A vSphere administrator uses vMotion to migrate a virtual machine between two ESXi hosts and notices that they can no longer ping the VM.
What is the cause?

• A. The destination host has an incorrect VLAN tag on the virtual machine port group for the VM.
• B. The destination host has two port groups with the same VLAN tag.
• C. There is an MTU mismatch.
• D. The virtual machine has RDMs attached.

Answer: B

NEW QUESTION 7
Which statement is true when adding a VM to a Resource Pool?

• A. The VM share value (%Shares) adjusts to the Resource Pool.
• B. The VM share value (%Shares) remains unchanged.
• C. The VM limit changes.
• D. The VM reservation changes.

Answer: A

NEW QUESTION 8
Which two statements are correct when licensing an ESXi 6.x host? (Choose two.)

• A. ESXi licenses can only be applied to ESXi hosts connected to a vCenter Server.
• B. Bulk licensing requires vSphere Auto Deploy to be enabled.
• C. ESXi licenses can be assigned utilizing the ESXi host client.
• D. Bulk licensing requires vSphere PowerCLI.

Answer: CD

NEW QUESTION 9
What three tools or products can be used for monitoring a vSphere 6.x deployment? (Choose three.)

• A. vCenter Alarms
• B. vCenter Events
• C. vRealize Automation
• D. vRealize Operations Manager
• E. vRealize Orchestrator

Answer: ADE

NEW QUESTION 10
Which two statements are true about LACP support with the vSphere Distributed Switch? (Choose two.)

• A. LACP works with MAC hash load balancing.
• B. LACP works with software iSCSI multipathing.
• C. LACP does not work with host profiles.
• D. LACP does not work with port mirroring.

Answer: CD

NEW QUESTION 11
A VMware vSphere 6.x administrator is creating an Alarm Action. What are three configurable actions? (Choose three.)

• A. Run a command.
• B. Shutdown Guest.
• C. Send a notification email.
• D. Restart Guest.
• E. Migrate VM.

Answer: ACE

NEW QUESTION 12
Which function key command will allow a vSphere administrator to access ESXi shell?

• A. Alt + F12
• B. Alt + F1
• C. Alt + F2
• D. Alt + F11

Answer: B

NEW QUESTION 13
Which state does VMware recommend an ESXi host be in before removing the ESXi host from a DRS cluster?

• A. Powered off
• B. Quarantine mode
• C. Disconnected
• D. Maintenance mode

Answer: D

NEW QUESTION 14
Which three options are available when applying a Customization Specification to an existing virtual machine? (Choose three.)

• A. Create a specification
• B. Import a specification
• C. Modify a specification
• D. Select an existing specification.
• E. Create a specification from an existing specification.

Answer: ADE

NEW QUESTION 15
A vSphere administrator has been tasked with ensuring that 500 virtual desktops are unable to communicate with one another, but can communicate with required services.
Which two solutions does VMware recommend? (Choose two.)

• A. vSphere Host Firewall
• B. Private VLAN
• C. VMware NSX Distributed Firewall
• D. Port Filtering

Answer: BC

NEW QUESTION 16
What are the two minimum configurations of a disk group in a vSAN host?

• A. 1 SSD drive for the caching tier and 1 or more SSDs for the capacity tier
• B. 1 SSD drive for the caching tier and 1 or more HDDs for the capacity tier
• C. 2 or more SSD drives for the caching tier and 2 or more HDDs for the capacity tier
• D. 2 or more SSD drives for the caching tier and 2 or more SSDs for the capacity tier

Answer: A

NEW QUESTION 17
Which two choices are valid ways to patch an ESXi host? (Choose two.)

• A. vRealize Operations Manager
• B. vSphere Update Manager
• C. configuring a Host Profile
• D. utilizing the esxcli Command Line Interface

Answer: BD

NEW QUESTION 18
Which two resource types can be limited on the vApp level? (Choose two.)

• A. Network
• B. CPU
• C. Storage
• D. Memory

Answer: BD

NEW QUESTION 19
A VMware vSphere 6.x administrator is implementing a new eight-node cluster for business critical applications. Each server will be configured with two 10 GbE network adapters and will utilize iSCSI for storage on one subnet.
Which feature is required to implement this solution?

• A. Storage DRS
• B. Network I/O Control
• C. VMKernel Port Binding
• D. LACP

Answer: C

NEW QUESTION 20
A vSphere administrator has been tasked with enabling upstream failure detection for networking in an environment that does not support link state tracking.
Which statement is a VMware-recommended option?

• A. Satisfy the prerequisites and enable Beacon probing.
• B. Enable Explicit failover order and ensure Failback is selected.
• C. Enable Explicit failover order and ensure Notify Switches is selected.
• D. Configure a port-channel with LACP.

Answer: A

NEW QUESTION 21
Which three virtual hardware configurations will allow snapshots? (Choose three.)

• A. 16+ vCPU
• B. full memory reservation
• C. Physical Mode RDMs
• D. Virtual Mode RDMs
• E. bus sharing

Answer: ABD

NEW QUESTION 22
What is required to create a vSphere Distributed Switch? (Choose two.)

• A. vSphere Enterprise Plus licensing is required.
• B. Login to the ESXi Host with the Root account.
• C. A minimum of two physical uplinks is required.
• D. The host is added to a vCenter Server.

Answer: AD

NEW QUESTION 23
Which are two steps that a vSphere administrator must take to increase the capacity of an existing VMFS datastore that is participating in a Storage DRS cluster? (Choose two.)

• A. In the vSphere Web Client navigator, select Global Inventory Lists > Datastore Clusters.
• B. Select the target datastore to grow and click the Increase Datastore Capacity icon.
• C. Select the target datastore cluster and click the Add Datastore icon.
• D. In the vSphere Web Client navigator, select Global Inventory Lists > Datastores.

Answer: BD

NEW QUESTION 24
......