Q61. Refer to the exhibit.
Which party has a SIP B2BUA role in the call?
A. 172.17.4.100
B. 10.100.4.65 and 172.17.4.100
C. 10.100.4.65
D. None of the parties has a B2BUA role in the call.
E. 10.100.4.68 and 10.100.4.65
Answer: C
Q62. When a call is attempted during a particular time of day, what determines the partitions where calling devices search?
A. time schedules
B. calling periods
C. dial schedules
D. time periods
Answer: A
Q63. Which three Cisco Unified Communications Manager settings can be used to support IP phone services? (Choose three.)
A. Device Defaults
B. Enterprise Parameters
C. IP Phone Service Configuration window
D. Common Phone Profile
E. Service Parameters
F. Phone Configuration window
Answer: B,D,F
Q64. Where do you configure a SIP route pattern?
A. Call Routing > Route/Hunt > SIP Route Pattern
B. System > SIP Route Pattern
C. Call Routing > SIP Route Pattern
D. Advanced Features > SIP Route Pattern
Answer: C
Q65. Which CUCM default global conference setting should be changed to ensure fraud prevention?
A. Advanced Ad Hoc Conference Enabled.
B. Block OffNet to OnNet Transfer.
C. MCU Conference Bridge Custom Layout Index.
D. Drop Ad Hoc Conference.
E. Enable Click-to-Conference for Third-Party Applications.
Answer: D
Q66. You need to delete an auto-registration Cisco Unified Communications Manager group for a cluster.What should you do?
A. Remove the Cisco Unified CallManager group devices.
B. Disable auto-registration settings in the Cisco Unified CallManager group.
C. Assign a different call group as the auto-registration Cisco Unified CallManager group.
D. Delete the auto-registration Cisco Unified CallManager group without performing any action.
Answer: C
Q67. Refer to the exhibit.
What is the command to place the static IP address by CLI in the CiscoTelePresence MSE 8000?
A. MSE 8050: static 0 10.10.2.13 255.255.255.255 10.10.2.1 200.87.100.10 200.87.100.20.
B. MSE 8050: static 0 10.10.2.13 255.255.255.0 10.10.2.1 200.87.100.10 200.87.100.20.
C. MSE 8050: static 1 10.10.2.13 255.255.255.0 10.10.2.1 200.87.100.10 200.87.100.20.
D. MSE 8050: static ip 0 10.10.2.13 255.255.255.0 10.10.2.1 200.87.100.10 200.87.100.20.
Answer: B
Q68. What is the relationship between a Region and a Location?
A. The Region codec parameter is used between a Region and its configured Locations.
B. The Region setting for a Location sets the number of audio and video calls that Location can support.
C. The codec parameter configured in the Region is only used between Regions and Location bandwidth isonly used between Locations.
D. The Region codec parameter is combined with Location bandwidth when communicating with otherRegions.
Answer: C
Q69. Refer to the exhibit.
A Cisco Unified Communications Manager group is configured with the subscriber (10.1.5.3) listed first and the publisher (10.1.5.2) listed second. Which Cisco Unified Communications Manager is used for incoming calls through an MGCP gateway?
A. the publisher
B. both the publisher and subscriber in a round-robin format
C. the first server listed in the Cisco Unified Communications Manager group list
D. the subscriber
Answer: A
Q70. Which configuration output indicates a properly configured T1 digital voice interface?
A. controller T1 0/0/0
framing esf
linecode b8zs
pri-group timeslots 1-24
!
B. isdn switch-type primary-ni
!
controller T1 0/0/0
framing esf
linecode b8zs
!
C. isdn switch-type primary-ni
!
controller T1 0/0/0
framing esf
linecode b8zs
pri-group timeslots 1-24
isdn switch-type primary-ni
!
D. isdn switch-type primary-ni
!
controller T1 0/0/0
framing esf
linecode b8zs
!
dial-peer voice 1 pots
destination-pattern 54….
direction-inward.dial
port 0/0/0:23
Answer: C