Highest Quality 300-170 Study Guides 2021

NEW QUESTION 1
You have a server that has a Cisco UCS CNA. A service profile that has a vNIC and a vHBA is mapped to fabric A. The vNIC is configured to use VLAN 10. VLAN 10 is the native VLAN for the vNIC. The vHBA is configured to use VSAN 2. Which description of the configuration is true?

• A. VSAN 3 can be configured by using VLAN 10 as the FCoE VLAN ID
• B. VSAN 2 can read traffic on VLAN 5.
• C. VLAN 10 and VSAN 2 must use the same ID
• D. VSAN 2 can be mapped to other VLANs in fabric A.

Answer: A

NEW QUESTION 2
Which two benefits come from using a Cisco Nexus 7000 Series Switch in VDC mode? (Choose two )

• A. par-VDC kernel resource allocation
• B. per-VDC administration
• C. per-VDC load balancing for Cisco Ether Channel
• D. per-VDC forwarding information base
• E. per-VDC fault isolation

Answer: BE

NEW QUESTION 3
You are performing VMM integration between ACI and VMware with vDS. You place a Cisco UCS Fabric Interconnect between the leaf and the ESXi hosts running on UCSB series Which is a valid configuration if using VMM integration with "On Demand" resolution?

• A. In the interface policy group, disable LLDP, enable Cisco Discovery Protocol, and then select MAC pinning on the Fabric Interconnects
• B. In the interface policy, enable LLD
• C. Cisco Discovery Protocol, and LACP
• D. In the interface pokey group, disable LLDP, disable Cisco Discovery Protocol, and then select active in the LACP pokey
• E. Configure LLD
• F. Cisco Discovery Protocol, and LACP policies under global policies to match the interface policies

Answer: A

NEW QUESTION 4
Which two tenants are configured by default in Cisco ACI? (Choose two.)

• A. common
• B. VRF
• C. Cisco
• D. customer
• E. mgmt

Answer: AE

NEW QUESTION 5
Which management interface is selected by the Cisco APIC by default if an in band management interface and an out of-band management interface exist?

• A. In-band is preferred
• B. The first configured interface is selected
• C. The interface that has the highest priority is selected
• D. Out-of band is preferred

Answer: D

NEW QUESTION 6
You must define a workload using Cisco UCS Manager. Drag and drop the workload definition task from the left into the correct order on the right.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Step 1 —define org hie
Step2 —-define pools
Step 3 —-configure adap
Step 4—configure server policies
Step 5—-configure server profiles temp

NEW QUESTION 7
Which statement about POAP licensing correctly describes temporary licensing?

• A. Temporary licensing is invoked by using the license grace-period command
• B. Temporary licensing is enabled automatically and is valid for 60 days
• C. Temporary licensing is invoked by using the license Install command
• D. Temporary licensing is enabled automatically and is valid for 30 days

Answer: A

NEW QUESTION 8
Which Cisco APlC health score will be affected if an EPG does not have a Bridge Domain associated with it ?

• A. spine health
• B. leaf health
• C. tenant health
• D. pod health

Answer: C

Explanation:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI
/guide/b_Cisco_Operating_ACI/b_Cisco_Operating_ACI_chapter_01010.pdf

NEW QUESTION 9
Which description of the Visore tool is true?

• A. It reports the current managed object in the bottom left hand corner of the GUI windows.
• B. It is a tool within USC Director that allows the user to view the end point database.
• C. It is an object store that existing on the APIC which can directly query the managed objects.
• D. It is a tool used to report API calls that are made by the GUI to the APIC.

Answer: C

NEW QUESTION 10
You deploy AVS for Virtual Manager integration and you add a host that has five VMNICs. You must use VXLAN to maximize the load balancing of the traffic inside the fabric. How many VMKNICs must you add?

• A. 2
• B. 3
• C. 4
• D. 8

Answer: C

NEW QUESTION 11
You want to modify a service profile that is bound to an updating template. Which description of the relationship between the service profile and the updating template is true?

• A. The service profile is updated after the server reboots.
• B. The service profile is updated automatically when the updating template changes.
• C. Changes to the updating template apply only to service profiles created after template is updated.
• D. The updating template can be changed only before the service profile is implemented

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Server-Mgmt/3-1

NEW QUESTION 12
Drag the descriptions on the left to the correct Cisco AVS switching mode on the right.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 13
Refer to the Exhibits.

The blade server has two HBAs. How many WWPN targets on VSAN 2001 are accessible to the blade server?

• A. 1
• B. 2
• C. 3
• D. 4

Answer: D

NEW QUESTION 14
The behavior of which packet type can be controlled by selecting unicast mode or flood mode in a bridge domain?

• A. ARP
• B. unknown unicast
• C. LLDP
• D. CDP

Answer: B

NEW QUESTION 15
Refer to the exhibit.

Which action do you take to ensure that both endpoints are within the same subnet?

• A. Stitch the two VLANs by using an attachable entity profile.
• B. Normalize the encapsulation by using the Same bridge domain.
• C. Normalize the encapsulation by using the same VRF
• D. Stitch the two VL ANs by using an application network profile.

Answer: A

NEW QUESTION 16
Which two options are purposes of a device package? (Choose two )

• A. to identify a set of network or service functions required by the application
• B. to provide a leaf and spine devices with operating systems and firmware
• C. to provide a Cisco APIC with information about device specifics
• D. to render the services required by a graph
• E. to manage a class of service devices

Answer: CE

NEW QUESTION 17
Which feature allows firewall ACLs to be configure automatically when new endpoint are attached to an
EPG?

• A. ARP network gleaning
• B. network stitching
• C. dynamic endpoint attach
• D. hardware proxy

Answer: C

NEW QUESTION 18
You are configuring a Cisco UCS port channel. Drag and drop the description from the left onto the correct port channel types on the right.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Fibre Channel Port Channel
Requires that channel mode is set to active on a upstream NPIV switch Can be set to admin speeds of Auto 4 Gbps, 8 Gbpss or 16 GPbs FCoE Port Channel
Carries traffic over an Ethernet Port channel
Uses a VPC that is created internally by Cisco UCS Manager https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Storage-Mgmt/3-

NEW QUESTION 19
Refer to the exhibit.

Which port is used for communication between the server and the Cisco Integrated Management Controller?

• A. ports on the adapter card
• B. management Ethernet port
• C. LAN on the motherboard port
• D. fabric uplink port

Answer: C

NEW QUESTION 20
You have a Cisco UCS system. You need to create VSAN 100 on a Cisco MDS 9000 Series switch and to enable switch port fc 1/10 as a member for the VSAN. Which command set should you use?

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: C

NEW QUESTION 21
You have a Cisco Nexus device that is configured to use RADIUS serve. What occur when local RBAC user account roles and RADIUS roles exist simultaneously?

• A. Only rules that are in the local roles and the RADIUS roles are applied
• B. Only rules from the local roles are applied.
• C. Only rules from the RADIUS roles are applied.
• D. The rules from the local roles and the RADIUS roles are merged.

Answer: B

NEW QUESTION 22
What occurs when you make an interface a member of an existing VRF m Cisco NX-OS?

• A. The a VRF-Aware services start to be filtered
• B. You are prompted to enter an IP address assignment
• C. All of the Layer 3 configurations are removed
• D. The state of the interface is changed to down

Answer: C

Explanation:
https://supportforums.cisco.com/document/133711/vrf-configuration-and-verification-nexus-7000

NEW QUESTION 23
A unicast packet enters into the front panel port of a leaf switch. The leaf switch performs a forwarding lookup for the packet destination IP address and has a miss result Assuming default configuration, which statement about what happens next is true'?

• A. The packet is sent to the forwardin proxy in the spine switch
• B. The packet is dropped on the leaf switch
• C. The packet is sent to another leaf switch within the same bridge domain
• D. The packet is flooded across the entire fabric because it is an unknown unicast.

Answer: A

NEW QUESTION 24
Refer to the exhibit:

You perform the configuration as shown in the exhibit Which two additional tasks must you perform to deploy EPG on PC . VPC . or Interface? (Choose two )

• A. Add the border leaf node to the Layer 2 outside connection
• B. Create an Attachable Access Entity Profile
• C. Create a Layer 2 outside connection
• D. Create a physical domain and a VLAN pool for the physical domain, and associate the physical domain to the EPG WEB
• E. Extend the VLAN represented by EPG out pi the Cisco ACI fabric

Answer: BD

NEW QUESTION 25
......