Want to know Actualtests 300-360 Exam practice test features? Want to lear more about Cisco Designing Cisco Wireless Enterprise Networks certification experience? Study Download Cisco 300-360 answers to Regenerate 300-360 questions at Actualtests. Gat a success with an absolute guarantee to pass Cisco 300-360 (Designing Cisco Wireless Enterprise Networks) test on your first attempt.

2021 Apr 300-360 latest exam

Q11. An engineer is conducting a location readiness test and wants a selected point to be considered location-ready. Which three possible configurations reflect the minimum number of APs needed? (Choose three.)

A. One AP is resident in each quadrant surrounding the point-in-question.

B. One AP per 1400 sq. ft. on the map.

C. Two APs are resident in each quadrant surrounding the point-in- question.

D. Four APs are deployed on the floor.

E. Three APs are within 70 feet (21 meters) of the point-in- question

F. Three APs are deployed on the floor.

Answer: A,D,E

Explanation:

A point in a WLAN deployment is location ready if the following are all determined to be true:

At least four access points are deployed on the floor.

At least one access point is found to be resident in each quadrant surrounding the point-in- QUESTION NO:. At least one access point residing in each of at least three of the surrounding quadrants is located within 70 feet of the point-in-QUESTION NO:.

Reference:

http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/CMX/CMX_LocFund.pdf


Q12. An engineer plugs in a Cisco Aironet 2700 Series Access Point and it is running in low power. Which three power requirements should be verified? (Choose three.)

A. 802.3ac compliant

B. 802.3at compliant

C. AP requires 43 VDC to function in full power.

D. AIR-PWRINJ3 power injector should be used.

E. AP requires 57 VDC to function in full power.

F. AIR-PWRINJ4 power injector should be used.

Answer: B,E,F

Explanation:

The access point should be powered by any 802.3at compliant device.

The recommended external power supply for the access point is the Cisco AIR-PWR-B power supply. The access point can also be powered by the following optional external power sources:

– Access point power injector (AIR-PWRINJ4)

– Any 802.3af compliant power injector is supported, but in this case the access point will dynamically shift from 3x4 to 3x3.

Reference: http://www.cisco.com/c/en/us/td/docs/wireless/access_point/2700/quick/guide/ap2700getst art.html


Q13. An engineer is preparing for an indoor wireless LAN survey and is provisioning a survey kit. Which three pieces of equipment should be included? (Choose three.)

A. external connector access point

B. integrated antenna access point

C. coax low-loss cable

D. battery operated power supply

E. range finder

F. Yagi antennas

Answer: B,D,E


Q14. A cabling contractor is working at a customer facility. The contractor is asking what rating of cable should be installed in return-air areas. Which information can be referenced to provide the contractor the requested information?

A. OSHA Codes

B. BICSI TDDM

C. NEC Ratings

D. IEEE Standards

Answer: B


Q15. An engineer is installing a wireless network in an industrial area with extreme temperatures and a significant amount of dust. Which enclosure should be used to protect the APs?

A. ACU

B. ADU

C. NEMA

D. WLSE

Answer: C

Explanation:

Sometimes access points (APs) are located in areas where they are subject to extreme moisture, temperatures, dust and particles. These APs might need to be mounted inside a sealed enclosure. The NEMA has a rating system for these enclosures, which are generally called NEMA enclosures.

Reference: http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/68666-wireless-sitesurvey-faq.html


Most recent 300-360 exam question:

Q16. What is the recommended minimum speed at the edge of the cells in an 802.11g network for a good Cisco VoWLAN deployment?

A. 11 Mb/s

B. 36 Mb/s

C. 12 Mb/s

D. 18 Mb/s

Answer: C


Q17. Refer to the exhibit.

While testing the post-deployment WLAN network, you discover that an AP has been placed in a difficult area.

The AP cannot be moved easily because of various requirements. The client performance of various Apple and Microsoft operating system-based products does not meet expectations. Which two options can help mitigate the performance issue? (Choose two.)

A. Add additional APs.

B. Increase the AP power level to maximum.

C. Rotate the AP 90 degrees to change antenna polarity.

D. Replace the AP with an AP and external antenna.

E. Change the AP location to one that is less RF hostile.

Answer: A,D


Q18. An engineer must design wireless coverage in thick-walled stairwells. Which information should the engineer refer to when determining where APs can be installed?

A. Local or National Building Code

B. IEEE

C. BICSI TDMM

D. Cisco Hardware Installation Guide

Answer: D


Q19. An engineer must perform a survey where the target client devices range from standard

Wi-Fi-equipped laptops, consumer handhelds and tablets, and low power tracking tags limited to 12 mW Tx power. With which setting should the survey AP be configured?

A. local power 11

B. local power 5

C. local power 14

D. local power 8

Answer: B


Q20. Cisco 7925G phones are experiencing intermittent connectivity issues. The wireless survey reveals that the facility has no current coverage holes. The radios on the 2.4GHz channel have all been statically set to power level 1. Which two reasons could explain why the phones are having issues on this wireless network? (Choose two.)

A. The phones are experiencing excessive co-channel interference.

B. The phones only operate on the 2.4 GHz band when the power level is above 25 mW.

C. The phones are not transmitting at the same power levels as the access points.

D. The phones are experiencing delays of less than 30 ms within their coverage cell.

E. The phones are receiving greater than -67 dBm RSSI on the 2.4 GHz band.

Answer: A,C