Up To Date Designing Cisco Enterprise Wireless Networks (ENWLSD) 300-425 Sample Question

NEW QUESTION 1
A customer has determined that aesthetics is a primary concern for their upcoming guest deployment. Which design consideration can be leveraged to address this concern?

• A. Paint the access point to cover the LED from being noticeable.
• B. Use enclosures to hide the wireless infrastructure in the surrounding environment.
• C. Use AIR-AP-BRACKET-1 to allow for greater mounting locations
• D. Deploy environmentally friendly cabling components to blend into the environment.

Answer: D

NEW QUESTION 2
A wireless engineer is performing a post verification of a wireless network. Which two metrics does the engineer verify to ensure that the wireless network can support voice services? (Choose two.)

• A. The coverage area must have a noise floor that does not exceed -87 dBm.
• B. The client device must have at least an -67 dBm RSSI.
• C. The rate of retransmitted packets must be 15 percent or below.
• D. The rate of retransmitted packets must be 20 percent or below.
• E. The client device must have at least an -65 dBm RSSI.

Answer: BC

NEW QUESTION 3
Which CLI command does an engineer use to validate that the redundancy peer of a Stateful Switchover pair of controllers is up and connected?

• A. rping
• B. ping
• C. eping
• D. mping

Answer: B

NEW QUESTION 4
An engineer must ensure that the wireless network can accomplish fast secure roaming by way of caching keys on the access points. Which key caching mechanism is enabled by default on a Cisco AireOS WLC?

• A. SKC
• B. OKC
• C. 802.11r
• D. CCKM

Answer: D

NEW QUESTION 5
A customer has two Cisco 550B WLCs that manage all the access points in their network and provide N+1 redundancy and load balancing. The primary Cisco WLC has 60 licenses and the secondary Cisco WLC has 40. The customer wants to convert the N+1 model to an HA model and provide SSO. Configuration must be performed during a maintenance window. After performing all the configurations on both controllers, the config redundancy unit secondary command is issued on the secondary Cisco WLC and it fails. Which parameter needs to be in place to complete the configuration?

• A. A cable in the RP port
• B. The secondary Cisco WLC needs a minimum of 50 base licenses
• C. The primary Cisco WLC is already set as the secondary unit.
• D. SSO needs to be enabled

Answer: B

NEW QUESTION 6
When conducting a site survey for real-time traffic over wireless, which two design capabilities of smartphones and tablets must be considered? (Choose two.)

• A. no support for 802.11ac
• B. higher data rates than laptops
• C. fewer antennas than laptops
• D. no support for 802.11r
• E. lower data rates than laptops

Answer: BC

NEW QUESTION 7
A rapidly expanding company has tasked their network engineer with wirelessly connecting a new cubicle area with Cisco workgroup bridges until the wired network is complete. Each of 42 new users has a computer and VoIP phone. How many APs for workgroup bridging must be ordered to keep cost at a minimum while connecting all devices?

• A. 4
• B. 5
• C. 6
• D. 7

Answer: A

NEW QUESTION 8
An engineer must speed up the reauthentication delays that are being experienced on the wireless infrastructure by deploying a key-caching mechanism. Which mechanism must be configured?

• A. PEAP
• B. FT
• C. PMF
• D. GTK-randomization

Answer: B

NEW QUESTION 9
Clustering Cisco WLCs into a single RF group enables the RRM algorithms to scale beyond the capabilities of a single Cisco WLC. How many WLC and APs in an RF group can the controller software scale up to in WLC release 8.9 depending on the platform?

• A. up to 20 WLCs and 1000 APs
• B. up to 20 WLCs and 3000 APs
• C. up to 20 WLCs and 4000 APs
• D. up to 20 WLCs and 6000 APs

Answer: D

NEW QUESTION 10
DRAG DROP
Drag and drop the characteristics from the left onto the correct functionalities on the right.
Select and Place:

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 11
A wireless engineer must optimize RF performance for multiple buildings with multiple types of construction and user density. Which two actions must be taken? (Choose two.)

• A. Configure FlexConnect groups for each building.
• B. Configure WMM profiles for each building.
• C. Configure AP groups for each area type.
• D. Configure RF profiles for each area type.
• E. Enable DTPC on the network.

Answer: CD

NEW QUESTION 12
An engineer is reducing the subnet size of the corporate WLAN by segmenting the VLAN into smaller subnets. Clients will be assigned a subnet by location. Which type of groups can the engineer use to map the smaller subnets to the corporate WLAN?

• A. WLC port groups
• B. RF groups
• C. AP groups
• D. interface groups

Answer: D

NEW QUESTION 13
A network engineer is configuring high availability on an access point. What is the maximum number of controllers that can be configured?

• A. 1
• B. 2
• C. 3
• D. 4

Answer: B

NEW QUESTION 14
A high-density wireless network is designed. Which Cisco WLC configuration setting must be incorporated in the design to encourage clients to use the 5 GHz spectrum?

• A. Band Select
• B. RRM
• C. Cisco Centralized Key Management
• D. load balancing

Answer: A

NEW QUESTION 15
During a client roaming event, which device is responsible for communicating the new Layer 2 EID mapping of a wireless supplicant to the fabric domain?

• A. WLC
• B. BN
• C. CP2
• D. CP1

Answer: A

NEW QUESTION 16
......