It is impossible to pass Cisco 300-710 exam without any help in the short term. Come to Testking soon and find the most advanced, correct and guaranteed Cisco 300-710 practice questions. You will get a surprising result by our Up to the minute Securing Networks with Cisco Firepower (SNCF) practice guides.

Free 300-710 Demo Online For Cisco Certifitcation:

NEW QUESTION 1
Which CLI command is used to generate firewall debug messages on a Cisco Firepower?

  • A. system support firewall-engine-debug
  • B. system support ssl-debug
  • C. system support platform
  • D. system support dump-table

Answer: A

NEW QUESTION 2
DRAG DROP
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Select and Place:

  • A. Mastered
  • B. Not Mastered

Answer: A

NEW QUESTION 3
Which two statements about deleting and re-adding a device to Cisco FMC are true? (Choose two.)

  • A. An option to re-apply NAT and VPN policies during registration is available, so users do not need to re-apply the policies after registration is completed.
  • B. Before re-adding the device in Cisco FMC, you must add the manager back in the device.
  • C. No option to delete and re-add a device is available in the Cisco FMC web interface.
  • D. The Cisco FMC web interface prompts users to re-apply access control policies.
  • E. No option to re-apply NAT and VPN policies during registration is available, so users need to re-apply the policies after registration is completed.

Answer: DE

NEW QUESTION 4
What is the difference between inline and inline tap on Cisco Firepower?

  • A. Inline tap mode can send a copy of the traffic to another device.
  • B. Inline tap mode does full packet capture.
  • C. Inline mode cannot do SSL decryption.
  • D. Inline mode can drop malicious traffic.

Answer: D

NEW QUESTION 5
How many report templates does the Cisco Firepower Management Center support?

  • A. 20
  • B. 10
  • C. 5
  • D. unlimited

Answer: D

NEW QUESTION 6
Which two remediation options are available when Cisco FMC is integrated with Cisco ISE? (Choose two.)

  • A. dynamic null route configured
  • B. DHCP pool disablement
  • C. quarantine
  • D. port shutdown
  • E. host shutdown

Answer: CD

NEW QUESTION 7
What are two application layer preprocessors? (Choose two.)

  • A. CIFS
  • B. IMAP
  • C. SSL
  • D. DNP3
  • E. ICMP

Answer: BC

NEW QUESTION 8
After deploying a network-monitoring tool to manage and monitor networking devices in your organization, you realize that you need to manually upload an MIB for the Cisco FMC. In which folder should you upload the MIB file?

  • A. /etc/sf/DCMIB.ALERT
  • B. /sf/etc/DCEALERT.MIB
  • C. /etc/sf/DCEALERT.MIB
  • D. system/etc/DCEALERT.MIB

Answer: C

NEW QUESTION 9
Which interface type allows packets to be dropped?

  • A. passive
  • B. inline
  • C. ERSPAN
  • D. TAP

Answer: B

NEW QUESTION 10
Which two statements about bridge-group interfaces in Cisco FTD are true? (Choose two.)

  • A. The BVI IP address must be in a separate subnet from the connected network.
  • B. Bridge groups are supported in both transparent and routed firewall modes.
  • C. Bridge groups are supported only in transparent firewall mode.
  • D. Bidirectional Forwarding Detection echo packets are allowed through the FTD when using bridge-group members.
  • E. Each directly connected network must be on the same subnet.

Answer: CD

NEW QUESTION 11
What is the disadvantage of setting up a site-to-site VPN in a clustered-units environment?

  • A. VPN connections can be re-established only if the failed master unit recovers.
  • B. Smart License is required to maintain VPN connections simultaneously across all cluster units.
  • C. VPN connections must be re-established when a new master unit is elected.
  • D. Only established VPN connections are maintained when a new master unit is elected.

Answer: C

NEW QUESTION 12
What is the benefit of selecting the trace option for packet capture?

  • A. The option indicates whether the packet was dropped or successful.
  • B. The option indicated whether the destination host responds through a different path.
  • C. The option limits the number of packets that are captured.
  • D. The option captures details of each packet.

Answer: C

NEW QUESTION 13
Which Firepower feature allows users to configure bridges in routed mode and enables devices to perform Layer 2 switching between interfaces?

  • A. FlexConfig
  • B. BDI
  • C. SGT
  • D. IRB

Answer: D

NEW QUESTION 14
When do you need the file-size command option during troubleshooting with packet capture?

  • A. when capture packets are less than 16 MB
  • B. when capture packets are restricted from the secondary memory
  • C. when capture packets exceed 10 GB
  • D. when capture packets exceed 32 MB

Answer: D

NEW QUESTION 15
Which command is run at the CLI when logged in to an FTD unit, to determine whether the unit is managed locally or by a remote FMC server?

  • A. system generate-troubleshoot
  • B. show configuration session
  • C. show managers
  • D. show running-config | include manager

Answer: C

NEW QUESTION 16
What is the maximum bit size that Cisco FMC supports for HTTPS certificates?

  • A. 1024
  • B. 8192
  • C. 4096
  • D. 2048

Answer: D

NEW QUESTION 17
What are the minimum requirements to deploy a managed device inline?

  • A. inline interfaces, security zones, MTU, and mode
  • B. passive interface, MTU, and mode
  • C. inline interfaces, MTU, and mode
  • D. passive interface, security zone, MTU, and mode

Answer: C

NEW QUESTION 18
What is the maximum SHA level of filtering that Threat Intelligence Director supports?

  • A. SHA-1024
  • B. SHA-4096
  • C. SHA-512
  • D. SHA-256

Answer: D

NEW QUESTION 19
Which two types of objects are reusable and supported by Cisco FMC? (Choose two.)

  • A. dynamic key mapping objects that help link HTTP and HTTPS GET requests to Layer 7 application protocols.
  • B. reputation-based objects that represent Security Intelligence feeds and lists, application filters based on category and reputation, and file lists
  • C. network-based objects that represent IP address and networks, port/protocols pairs, VLAN tags, security zones, and origin/destination country
  • D. network-based objects that represent FQDN mappings and networks, port/protocol pairs, VXLAN tags, security zones and origin/destination country
  • E. reputation-based objects, such as URL categories

Answer: BC

NEW QUESTION 20
Which two deployment types support high availability? (Choose two.)

  • A. transparent
  • B. routed
  • C. clustered
  • D. intra-chassis multi-instance
  • E. virtual appliance in public cloud

Answer: AB

NEW QUESTION 21
Which protocol establishes network redundancy in a switched Firepower device deployment?

  • A. STP
  • B. HSRP
  • C. GLBP
  • D. VRRP

Answer: A

NEW QUESTION 22
......

100% Valid and Newest Version 300-710 Questions & Answers shared by Dumps-files.com, Get Full Dumps HERE: https://www.dumps-files.com/files/300-710/ (New 0 Q&As)