It is impossible to pass Cisco 300-715 exam without any help in the short term. Come to Pass4sure soon and find the most advanced, correct and guaranteed Cisco 300-715 practice questions. You will get a surprising result by our Improved Implementing and Configuring Cisco Identity Services Engine (SISE) practice guides.
Also have 300-715 free dumps questions for you:
NEW QUESTION 1
Refer to the exhibit.
Which command is typed within the CLI of a switch to view the troubleshooting output?
- A. show authentication sessions mac 000e.84af.59af details
- B. show authentication registrations
- C. show authentication interface gigabitethernet2/0/36
- D. show authentication sessions method
Answer: A
NEW QUESTION 2
When configuring Active Directory groups, what does the Cisco ISE use to resolve ambiguous group names?
- A. MIB
- B. SID
- C. MAB
- D. TGT
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/ise/2-0/ise_active_directory_integration/b_ISE_AD_integration_2x.html
NEW QUESTION 3
Which advanced option within a WLAN must be enabled to trigger Central Web Authentication for Wireless users on AireOS controller?
- A. DHCP server
- B. override Interface ACL
- C. static IP tunneling
- D. AAA override
Answer: D
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_010110111.html
NEW QUESTION 4
Which two endpoint compliance statuses are possible? (Choose two.)
- A. compliant
- B. valid
- C. unknown
- D. known
- E. invalid
Answer: AC
NEW QUESTION 5
Which use case validates a change of authorization?
- A. An endpoint that is disconnected from the network is discovered.
- B. Endpoints are created through device registration for the guests.
- C. An endpoint profiling policy is changed for authorization policy.
- D. An authenticated, wired EAP-capable endpoint is discovered.
Answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_prof_pol.html
NEW QUESTION 6
Which two probes must be enabled for the ARP cache to function in the Cisco ISE profiling service so that a user can reliably bind the IP addresses and MAC addresses of endpoints? (Choose two.)
- A. SNMP
- B. HTTP
- C. RADIUS
- D. DHCP
- E. NetFlow
Answer: CD
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_010100.html
NEW QUESTION 7
A user reports that the RADIUS accounting packets are not being seen on the Cisco ISE server. Which command is the user missing in the switch’s configuration?
- A. aaa accounting resource default start-stop group radius
- B. radius-server vsa send accounting
- C. aaa accounting network default start-stop group radius
- D. aaa accounting exec default start-stop group radius
Answer: B
Explanation:
Reference: https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_sw_cnfg.pdf
NEW QUESTION 8
Which two responses from the RADIUS server to NAS are valid during the authentication process? (Choose two.)
- A. access-challenge
- B. access-accept
- C. access-request
- D. access-reserved
- E. access-response
Answer: AB
NEW QUESTION 9
What are two benefits of TACACS+ versus RADIUS for device administration? (Choose two.)
- A. TACACS+ has command authorization, and RADIUS does not.
- B. TACACS+ uses UDP, and RADIUS uses TCP.
- C. TACACS+ supports 802.1X, and RADIUS supports MAB.
- D. TACACS+ provides the service type, and RADIUS does not.
- E. TACACS+ encrypts the whole payload, and RADIUS encrypts only the password.
Answer: AE
NEW QUESTION 10
Which term refers to an endpoint agent that tries to join an 802.1X- enabled network?
- A. EAP server
- B. authenticator
- C. supplicant
- D. client
Answer: C
NEW QUESTION 11
In which two ways can users and endpoints be classified for TrustSec? (Choose two.)
- A. VLAN
- B. dynamic
- C. QoS
- D. SGACL
- E. SXP
Answer: AD
NEW QUESTION 12
Which three default endpoint identity groups does Cisco ISE create? (Choose three.)
- A. endpoint
- B. unknown
- C. blacklist
- D. profiled
- E. whitelist
Answer: BCD
Explanation:
Reference: https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_man_identities.html#wp1203054
NEW QUESTION 13
Which interface-level command is needed to turn on 802.1X authentication?
- A. dot1x system-auth-control
- B. dot1x pae authenticator
- C. aaa server radius dynamic-author
- D. authentication host-mode single- host
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/31sg/configuration/guide/conf/dot1x.html
NEW QUESTION 14
During BYOD flow, from where does a Microsoft Windows PC download the Network Setup Assistant?
- A. Microsoft App Store
- B. Cisco App Store
- C. Cisco ISE directly
- D. Native OTA functionality
Answer: C
Explanation:
Reference: https://ciscocustomer.lookbookhq.com/iseguidedjourney/BYOD-configuration
NEW QUESTION 15
What occurs when a Cisco ISE distributed deployment has two nodes and the secondary node is deregistered?
- A. The secondary node restarts.
- B. The primary node restarts.
- C. Both nodes restart.
- D. The primary node becomes standalone.
Answer: C
NEW QUESTION 16
What is the minimum certainty factor when creating a profiler policy?
- A. the minimum number that a predefined condition provides
- B. the maximum number that a predefined condition provides
- C. the minimum number that a device certainty factor must reach to become a member of the profile
- D. the maximum number that a device certainty factor must reach to become a member of the profile
Answer: C
NEW QUESTION 17
What is the purpose of the ip http server
command on a switch?
- A. It enables the https server for users for web authentication.
- B. It enables dot1x authentication on the switch.
- C. It enables MAB authentication on the switch.
- D. It enables the switch to redirect users for web authentication.
Answer: C
NEW QUESTION 18
Which two fields are available when creating an endpoint on the context visibility page of Cisco ISE? (Choose two.)
- A. Security Group Tag
- B. Endpoint Family
- C. Policy Assignment
- D. Identity Group Assignment
- E. IP Address
Answer: CD
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/ise/2-2/admin_guide/b_ise_admin_guide_22/b_ise_admin_guide_22_chapter_010101.html
NEW QUESTION 19
What are two requirements of generating a single certificate in Cisco ISE by using a certificate provisioning portal, without generating a certificate signing request? (Choose two.)
- A. Enter the IP address of the device.
- B. Enter the common name.
- C. Choose the hashing method.
- D. Locate the CSV file for the device MAC.
- E. Select the certificate template.
Answer: BE
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200534-ISE-2-0-Certificate-Provisioning-Portal.html
NEW QUESTION 20
Which two features are available when the primary admin node is down and the secondary admin node has not been promoted? (Choose two.)
- A. new AD user 802.1X authentication
- B. hotspot
- C. posture
- D. guest AUP
- E. BYOD
Answer: BD
NEW QUESTION 21
Which two features must be used on Cisco ISE to enable the TACACS+ feature? (Choose two.)
- A. Command Sets
- B. Server Sequence
- C. Device Administration License
- D. External TACACS Servers
- E. Device Admin Service
Answer: CE
NEW QUESTION 22
......
100% Valid and Newest Version 300-715 Questions & Answers shared by 2passeasy, Get Full Dumps HERE: https://www.2passeasy.com/dumps/300-715/ (New 60 Q&As)