We provide real 300-815 exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Cisco 300-815 Exam quickly & easily. The 300-815 PDF type is available for reading and printing. You can print more and practice many times. With the help of our Cisco 300-815 dumps pdf and vce product and material, you can easily pass the 300-815 exam.

Cisco 300-815 Free Dumps Questions Online, Read and Test Now.

NEW QUESTION 1
In Cisco Unified Communications Manager globalized call routing is implemented and must confirm that it is correctly implemented without making a call. Which tool do you use for verification?

  • A. Dialed Number Analyzer
  • B. Real-Time Monitoring Tool
  • C. SDI trace
  • D. SDL trace

Answer: A

NEW QUESTION 2
If all patterns below are configured in Cisco Unified Communications Manager which would be used when dialing the pattern “123”?

  • A. 12!
  • B. 12X (urgent priority set)
  • C. 1XX (urgent Priority Set)
  • D. 12[2-5]

Answer: B

NEW QUESTION 3
An administrator is configuring a cluster for ILS and wants to limit the amount of entities that Cisco Unified Communications Manager can write to the database for data that is learned through ILS. Which service parameter is used to adjust this limit?

  • A. ILS Max Number of Learned Objects in Database
  • B. ILS Active Learned Object Upper Limit
  • C. Global Data Service Parameter Limit
  • D. Imported Dial Plan Replication Database Object Lower Limit

Answer: A

NEW QUESTION 4
Which two configuration parameters are prerequisites to set Native Call Queuing on Cisco Unified Communications Manager? (Choose two.)

  • A. Cisco IP Voice Media Streaming Service must be activated on at least one node in the cluster.
  • B. A unicast music on hold audio source must be configured.
  • C. Cisco RIS data collector service must be running on the same server as the Cisco CallManager service.
  • D. The maximum number of callers allowed in queue must be 10.
  • E. The phone button template must have the Queue Status Softkey configured.

Answer: AC

NEW QUESTION 5
Refer to the exhibit. An engineer configures Cisco Unified Border Element to connect the enterprise VoIP network with a SIP telephony provider. Calls are not working in either direction. What must be configured in the dial peer 1 to fix the issue?

  • A. address 555 ……..
  • B. codec g729
  • C. session-protocol sipv2
  • D. incoming called number 555…….

Answer: D

NEW QUESTION 6
A support engineer is troubleshooting a voice network. When conducting a search for call setup details related to calling search space issues, which trace files should be investigated?

  • A. CallManager traces
  • B. CTI Manager traces
  • C. Cisco IP Manager Assistant
  • D. Call logs

Answer: A

NEW QUESTION 7
Which configuration element of a hunt group allows for changing Calling Party Transformations settings?

  • A. line group
  • B. hunt pilot
  • C. route group
  • D. hunt list

Answer: B

NEW QUESTION 8
Cisco SIP IP telephony is implemented on two floors of your company. Afterward, users report intermittent voice issues in calls established between floors. All calls are established, and sometimes they work well, but sometimes there is oneway audio or no audio. You determine that there is a firewall between the floors, and the administrator reports that it is allowing SIP signaling and UDP ports from 20000 to 22000 bidirectionally. What are two possible solutions? (Choose two.)

  • A. Go to the SIP profile assigned to these IP phones in Cisco Unified CM and change the range of media ports to 16384-32767
  • B. Ask the firewall administrator to change the ports to TCP.
  • C. Ask the firewall administrator to change the range of UDP ports to 16384-32767.
  • D. Go to the SIP profile assigned to these IP phones in Cisco Unified CM and change the range of media ports to 20000-22000.
  • E. Go to System Parameters in Cisco Unified Communications Manager and change the range of media ports to 20000-22000.

Answer: AC

NEW QUESTION 9
When the services key is pressed Cisco Extension Mobility does not show up. What is the cause of the issue?

  • A. The URL configured for Cisco Extension Mobility is not correct.
  • B. Cisco Extension Mobility Service is not running.
  • C. The phone is not subscribed to Cisco Extension Mobility Service.
  • D. Cisco Extension Mobility is not enabled in the Phone Configuration Window (Device > Phone)

Answer: C

NEW QUESTION 10
Which IOS command creates a SIP- enabled dial peer?

  • A. voice dial-peer 20 sip
  • B. dial-peer voice 20 voip
  • C. dial-peer voice 20 pots
  • D. dial peer voice 20 sip

Answer: B

NEW QUESTION 11
When you troubleshoot H.323 call setup, which message informs you that the called party is being notified about the call?

  • A. ALERTING
  • B. PROCEEDING
  • C. CONNECT
  • D. RINGING

Answer: C

NEW QUESTION 12
A user reports that when they attempt to log out from the Cisco Extension Mobility service by pressing the Services button, they cannot log out. What is the most likely cause of this issue?

  • A. The Cisco Extension Mobility service has not been configured on the phone.
  • B. There might be a significant delay between the button being pressed and the Cisco Extension Mobility service recognizing i
  • C. It would be best to check network latency.
  • D. The user device profile has not been assigned to the user.
  • E. The user device profile is not subscribed to the Cisco Extension Mobility service.

Answer: D

NEW QUESTION 13
Which description of RTP timestamps or sequence numbers is true?

  • A. The sequence number is used to detect losses.
  • B. Timestamps increase by the time “carrying” by a packet.
  • C. Sequence numbers increase by four for each RTP packet transmitted.
  • D. The timestamp is used to place the incoming audio and video packets in the correct timing order (playout delay compensation).

Answer: D

NEW QUESTION 14
Which two statements are correct with respect to the Client Matter Code setting in the route pattern configuration? (Choose two.)

  • A. The Client Matter Code feature does not support overlap sending because the Cisco Unified CM cannot determine when to prompt the user for the code.
  • B. If you check the Allow Overlap Sending check box, the Require Client Matter Code check box becomes disabled.
  • C. If you check the Allow Overlap Sending check box, you can also check the Require Client Matter Code check box.
  • D. The Client Matter Code feature does support overlap sending because the Cisco Unified Communications Manager can determine when to prompt the user for the code.
  • E. The Client Matter Code has the option to configure Authorization Level such as in the Forced Authorization Code.

Answer: AB

NEW QUESTION 15
An administrator is troubleshooting call failures on an H.323 gateway via the CLI. To see signaling for media and call setup, which debug must the Administrator turn on?

  • A. debug H.323 messages
  • B. debug H.225 asn1
  • C. debug H.246 asn 1
  • D. debug H.225 media
  • E. debug H.323 asn 1

Answer: B

NEW QUESTION 16
Which two types of distribution algorithm are within a line group? (Choose two.)

  • A. random
  • B. circular
  • C. highest preference
  • D. top down
  • E. bottom up

Answer: BD

NEW QUESTION 17
Which two extended capabilities must be configured on dial peers for fast start-to-early media scenarios (H.323 to SIP interworking)? (Choose two.)

  • A. DTMF
  • B. BFCP
  • C. VIDEO
  • D. FAX
  • E. AUDIO

Answer: AB

NEW QUESTION 18
The Cisco Unified Communications Manager Dialed Number Analyzer allows analysis of calls from which two devices? (Choose two.)

  • A. translation patterns
  • B. device pools
  • C. CTI ports
  • D. CTI route points
  • E. IP phones

Answer: CE

NEW QUESTION 19
What is the relationship between partition, time schedule, and time period in Time-of-Day routing in Cisco Unified Communications Manager?

  • A. A partition can have multiple time schedules assigne
  • B. A time schedule contains one or more time periods.
  • C. A partition can have one time schedule assigne
  • D. A time schedule contains one or more time periods.
  • E. A partition can have multiple time schedules assigne
  • F. A time schedule contains only one time period.
  • G. A partition can have one time schedule assigne
  • H. A time schedule contains only one time period.

Answer: A

NEW QUESTION 20
When configuring hunt groups, where do you add the individual directory numbers that will be part of the group?

  • A. route group
  • B. line group
  • C. hunt list
  • D. hunt pilot

Answer: B

NEW QUESTION 21
Which top-level IOS command is needed to begin the configuration of a Cisco Unified Communications Manager Express gateway to enable phones to be registered via SIP?

  • A. allow-connections sip to sip
  • B. voice service voip
  • C. voice register global
  • D. voice register dn

Answer: C

NEW QUESTION 22
A company has an SRST gateway running an IOS XE image. The company plans to enable the IPv6 addressing companywide. To enable the IPv6 in a unified SRST gateway to support SIP phones, what are two supported supplementary features for an IPv6 fallback scenario? (Choose two.)

  • A. three-way conference
  • B. secure SIP lines
  • C. T.38 fax relay
  • D. transcoding
  • E. SIP trunk

Answer: AC

NEW QUESTION 23
Where is the dtmf-relay command configured on Cisco Unified Border Element?

  • A. in the voice-class VoIP configuration
  • B. in the VoIP dial peer
  • C. in global SIP configuration
  • D. in the VoIP or POTS dial peers

Answer: B

NEW QUESTION 24
......

Recommend!! Get the Full 300-815 dumps in VCE and PDF From Dumpscollection.com, Welcome to Download: https://www.dumpscollection.net/dumps/300-815/ (New 0 Q&As Version)