Our staff members possess spent numerous hours developing the Alcatel-Lucent practice questions as well as software with the highest rated good quality to train an individual for the Alcatel-Lucent Alcatel-Lucent exam. Many of us guarantee which you will pass your Alcatel-Lucent real test by employing our Alcatel-Lucent training materials. Examcollection offers a quickest as well as cheapest way towards the Alcatel-Lucent Alcatel-Lucent 4A0-104 certification. It?¡¥s never a new faster as well as easier task to prepare the Alcatel-Lucent Alcatel-Lucent exam with out any assist. Our elaborately made 4A0-104 exam questions with in depth answers are of the great assist for you to have the Alcatel-Lucent Alcatel-Lucent certificate. The Alcatel-Lucent practice questions and answers are revised and verified by our professionals as well as bear 100% accuracy. The type of questions is actually as the identical as the genuine Alcatel-Lucent Alcatel-Lucent exam, that is multiple choice.

2021 Dec 4A0-104 training

Q61. Which service is needed to bridge an ATM service to an Ethernet service? 

A. Apipe 

B. Fpipe 

C. Cpipe 

D. Epipe 

E. Bridge service 

Answer: D 


Q62. A VPRN service is configured with BGP used as the CE-PE routing protocol. What address families are required on the PE-CE BGP session? 

A. VPN-IPv4 address families are required in order for routes to be exchanged with the PE. 

B. Only default IPv4 address families are required since the CE is not aware of the VPRN service 

C. Either IPv4 or VPN-IPv4 address families can be configured on the PE-CE BGP session 

D. An IPv4 address family configuration is required for the PE-PE configuration. 

Answer: B 


Q63. Which of the following options are used to configure an MPLS signaling type to be used on an 

SDP? (Choose 2) 

A. configure service sdp sdp-id gre create 

B. configure service sdp sdp-id create 

C. Idp 

D. Isp Isp-name 

Answer: C,D 


Q64. What can the sdp-ping command be used for? (Choose 2) 

A. To test the ability of reaching the far-end IP address of an SDP within the SDP encapsulation 

B. To determine the path MTU to the far-end IP address over an SDP. 

C. To determine the service MTU of the service using an SDP. 

D. To determine the presence of hosts using the service 

Answer: A,B 


Q65. VPWS allows carriers to offer services such as point-to-point frame-relay, ATM, and Ethernet on a single platform without the need for multiple overlay networks. 

A. TRUE 

B. FALSE 

Answer: A 


Up to the minute 4A0-104 free draindumps:

Q66. Which of the following SAPs will toward tagged frames with an outer VLAN tag of 200? (Choose 3) 

A. sap 1/1/1 

B. sap 1/1/1:* 

C. sap 1/1/1:*.0 

D. sap 1/1/1:0* 

E. sap 1/1/1:200.* 

F. sap 1/1/1:300:200 

Answer: A,B,E 


Q67. Click on the exhibit button below. 

Is a routing policy required on PE1 to advertise a CE1's system interface to PE2? 

A. Yes. A routing policy is required to advertise routes between PE routers in a VPRN 

B. No. A routing policy is not required; the default behavior on the 7750 SR is to advertise all VPRN routes between PE routers. 

C. A routing policy is required only when BGP is used as the PE-CE routing protocol, as shown in the exhibit. 

D. A CE1 system interface can not be advertised to PE2 since the CE routers are not aware of the VPRN. 

Answer: B 


Q68. Which of the following best describes how the path-mlu is chosen for an SDP? 

A. An SDP does not have a path-mtu 

B. The path-mtu must be set by the administrator. 

C. By default, the path-mtu is calculated automatically from the network port MTU of the PE router. 

D. The path-mtu is calculated based on the service MTU of the service using the SDP. 

E. The path-mtu is signaled between the PE endpoints when the service is established. 

Answer: C 


Q69. What command syntax would be used to create a new routed interface on an existing IES service? 

A. config>service>ies# interface "to-CE" customer customer-id create 

B. config>service>ies# interface to CE create 

C. config>service>ies# interface to CE 

D. config>service>ies# interface "to-CE" create 

Answer: D 


Q70. Click on the exhibit button below. 

If CE1 and PE1 use BGP to exchange routing information and CE2 and PE2 use static routing to forward traffic to and from the VPRN, which of the following statements is considered TRUE? 

A. An export policy is required on PE1 to advertise routes to CE1. 

B. An export policy is not required on PE2 to advertise routes to CE2. 

C. An export policy is not required to advertise routes between PE routers 

D. All of the above statements are true 

E. All of the above statements are false 

Answer: D