Q61. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2 and a client computer named Computer1 that runs Windows 8. DC1 is configured as a DHCP server as shown in the exhibit. Computer1 is configured to obtain an IP address automatically.
You need to ensure that Computer1 can receive an IP address from DC1.
What should you do?
A. Disable the Allow filters.
B. Disable the Deny filters
C. Activate Scope [10.1.1.0] Contoso.com.
D. Authorize dc1.contoso.com.
Answer: D
Explanation:
A red down arrow indicates an unauthorized DHCP server. A DHCP server that is a domain controller or a member of an Active Directory domain queries Active Directory for the list of authorized servers (identified by IP address). If its own IP address is not in the list of authorized DHCP servers, the DHCP Server service does not complete its startup sequence and automatically shuts down.
Q62. - (Topic 3)
You have a server named Server1 that runs Windows Server 2012 R2.
You need to remove Windows Explorer, Windows Internet Explorer, and all related components and files from Server1.
What should you run on Server1?
A. Uninstall-WindowsFeature Server-Gui-Mgmt-Infra Remove
B. Uninstall-WindowsFeature Server-Gui-Shell Remove
C. msiexec.exe /uninstall iexplore.exe /x
D. msiexec.exe /uninstall explorer.exe /x
Answer: B
Explanation:
A. Would be a server core install
B. No IE or taskbar, explorer or control panel
C. Would leave components
D. Would leave components In Windows Server 2012 R2, you can remove the Server Graphical Shell, resulting in the “Minimal ServerInterface”. This is similar to a Server with a GUI installation, but Internet Explorer 10, Windows Explorer, the desktop, and the Start screen are not installed. Microsoft Management Console (MMC), Server Manager, and a subset of Control Panel are still present. If the server has a full installation of Windows Server, and I need to bring the server down to minimal server interface, I only need to remove the Server-GUI-Shell.
Q63. HOTSPOT - (Topic 3)
Your network contains an Active Directory domain named fabrikam.com. You implement DirectAccess and an IKEv2 VPN.
You need to view the properties of the VPN connection.
Which connection properties should you view? To answer, select the appropriate connection properties in the answer area.
Answer:
Q64. - (Topic 3)
You have a server named Server1. Server1 runs Windows Server 2012 R2 and has the File and Storage Services server role installed. You attach four 500-GB disks to Server1. You need to configure the storage to meet the following requirements:
. Storage for an application named Application1 must be provided. Application1 requires 20 GB and will require a maximum of 800 GB in three years. . Storage for an application named Application2 must be provided. Application2 requires 20 GB and will require a maximum of 900 GB in three years. . The solution must provide the ability to dynamically add storage without requiring configuration changes to the applications. . The storage must be available if a single disk fails.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. From File and Storage Services, create virtual disks by using fixed provisioning.
B. From File and Storage Services, create a storage pool that uses all four disks.
C. From Disk Management, create two new mirror volumes that use two disks each.
D. From Disk Management, create a new RAID-5 volume that uses all four disks.
E. From File and Storage Services, create virtual disks by using thin provisioning.
Answer: B,E
Q65. - (Topic 2)
You have a server named Print1 that runs Windows Server 2012 R2.
On Print1, you share a printer named Printer1.
You need to ensure that only the members of the Server Operators group, the
Administrators group, and the Print Operators group can send print jobs to Printer1.
What should you do?
A. Remove the permissions for the Creator Owner group.
B. Assign the Print permission to the Server Operators group.
C. Remove the permissions for the Everyone group.
D. Assign the Print permission to the Administrators group.
Answer: C
Explanation:
By default Everyone can print. This permissions need to be removed.
Q66. HOTSPOT - (Topic 3)
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server2 has the Windows Deployment Services server role installed.
On Server1, you have a virtual machine named VM1.
You plan to deploy an image to VM1 by using Windows Deployment Services (WDS).
You need to ensure that VM1 can connect to Server1 by using PXE.
Which settings should you configure on VM1? To answer, select the appropriate settings in
the answer area.
Answer:
Q67. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed. You have been instructed to make sure that a server, named ENSUREPASS-SR07, is configured to be managed remotely from ENSUREPASS-SR01 using Server Manager.
Which of the following is not a valid option to take? (Choose all that apply.)
A. You could access the server manager on ENSUREPASS-SR07.
B. You could access the server manager on ENSUREPASS-SR13.
C. You could run the %windir%\system32\Configure-SMRemoting.exe from an elevated command prompt on ENSUREPASS-SR13.
D. You could run the Configure-SMRemoting.exe – enable cmdlet on ENSUREPASS-SR07.
Answer: B,C
Q68. - (Topic 3)
A laptop with server 2012 R2 OS, you need to ensure that server 2012 R2 can use wireless network adapter.
What should you do first?
A. use server manager to install the Wireless Lan Service Role
B. use server manager to install the Wireless Network Role
C. use server manager to install the Wireless Lan Service Feature
D. use server manager to install the Wireless Network Feature
Answer: C
Q69. - (Topic 1)
You have virtual machine named VM1.
VM1 uses a fixed size virtual hard disk (VHD) named Disk1.vhD. Disk1.vhd is 200 GB.
You shut down VM1.
You need to reduce the size of disk1.vhd.
Which action should you select from the Edit Virtual Hard Disk Wizard?
A. Merge
B. Compact
C. Shrink
D. Convert
Answer: C
Q70. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2.
Server1 has the Group Policy Management feature installed. Server2 has the Print and Document Services server role installed.
On Server2, you open Print Management and you deploy a printer named Printer1 by using a Group Policy object (GPO) named GPO1.When you open GPO1 on Server1, you discover that the Deployed Printers node does not appear.
You need to view the Deployed Printers node in GPO1.
What should you do?
A. On Server1, modify the Group Policy filtering options of GPO1.
B. On a domain controller, create a Group Policy central store.
C. On Server2, install the Group Policy Management feature.
D. On Server1, configure the security filtering of GPO1.
Answer: C
Explanation:
Pre-Requisites To use Group Policy for printer deployment you will need to have a Windows Active Directory domain, and this article assumes that your Domain Controller is a Windows 2008 R2 Server. You will also need the Print Services role installed on a server (can be on your DC), and you will be using the Print Management and Group Policy Management consoles to configure the various settings. It’s assumed that you have already followed Part One and have one or more printers shared on your server with the necessary drivers, ready to deploy to your client computers.