Act now and download your Microsoft 70-680 test today! Do not waste time for the worthless Microsoft 70-680 tutorials. Download Improve Microsoft TS:Windows 7,Configuring exam with real questions and answers and begin to learn Microsoft 70-680 with a classic professional.
2021 Mar 70-680 question
Q131. - (Topic 5)
You use a portable computer that has Windows 7 Enterprise SP1 installed. A conference room at your company has a network projector installed on a server within the company network.
You need to connect to the projector from your computer. What should you do?
A. From Device Manager, click Add legacy hardware.
B. From Accessories, click Connect to a Network Projector.
C. Run the Displayswitch.exe command and select Projector only.
D. From Display, click Connect to a projector.
Answer: C
Q132. - (Topic 2)
You are investigating instability and boot problems on a computer running Windows 7 Enterprise. You boot using the Last Known Good Configuration (Advanced) option and perform a system restore. This does not solve your problems, and you want to undo the system restore. Can you do this, and what is the reason for your answer?
A. No. You can undo a system restore only if you initiate it from the System Recovery tools.
B. No. You can undo a system restore only if you carry it out after booting normally.
C. Yes. You can always undo a system restore, no matter how you booted the computer or how you initiated the restore.
D. Yes. You can undo a system restore that you perform after either booting normally or booting using Last Known Good Configuration (Advanced).
Answer: D
Q133. - (Topic 2)
You have a computer that runs Windows 7. Multiple users log on to the computer. The computer has five removable devices.
You need to ensure that users can only access removable devices that have been previously installed on the computer.
What should you modify in the Local Group Policy?
A. Enable the Prevent redirection of USB devices setting.
B. Enable the Prevent installation of removable devices setting.
C. Disable the WPD Devices: Deny read access setting.
D. Disable the Allow administrators to override Device Installation Restriction policies setting.
Answer: B
Explanation:
Prevent installation of removable devices This policy setting allows you to prevent Windows from installing removable devices. A device is considered removable when the driver for the device to which it is connected indicates that the device is removable. For example, a Universal Serial Bus (USB) device is reported to be removable by the drivers for the USB hub to which the device is connected. This policy setting takes precedence over any other policy setting that allows Windows to install a device. If you enable this policy setting, Windows is prevented from installing removable devices and existing removable devices cannot have their drivers updated. If you enable this policy setting on a remote desktop server, the policy setting affects redirection of removable devices from a remote desktop client to the remote desktop server. If you disable or do not configure this policy setting, Windows can install and update device drivers for removable devices as allowed or prevented by other policy settings. NOT Prevent redirection of USB devicesThis policy setting prevents redirection of USB devices. If you enable this setting, an alternate driver for USB devices cannot be loaded. If you disable or do not configure this setting, an alternate driver for USB devices can be loaded.
Q134. - (Topic 5)
You use a desktop computer that has Windows 7 Ultimate SP1. The relevant portions of the computer configuration are shown in the following exhibits:
. The Disk Management console (Click the Exhibit button.)
. The System Properties window (Click the Exhibit button.)
. The System protection for Local Disk C window (Click the Exhibit button.)
You share the Pictures library over a network.
You discover that a JPEG image file located in the library was moved by a network user into a ZIP archive and is protected by using a password.
You need to open the image file.
What should you do?
A. Delete restore points.
B. Create a restore point.
C. Perform a system restore.
D. Search for the file in the Recycle Bin.
E. Increase disk space used for system protection.
F. Copy the file from a previous version of a folder.
G. Set restore settings to only restore previous versions of files.
H. Run the cipher /x command from the elevated command prompt,
I. Run the vssadmin list volumes command from the elevated command prompt.
J. Run the vssadmin list shadows command from the elevated command prompt,
K. Run the compact /U <file_name> command from the elevated command prompt.
Answer: F
Explanation:
Note: To restore a previous version of a file or folder that's included in a library, right-click the file or folder in the location where it's saved, rather than in the library. For example, to restore a previous version of a picture that's included in the Pictures library but is stored in the My Pictures folder, right-click the My Pictures folder, and then click Restore previous versions.
Q135. HOTSPOT - (Topic 4)
You have a computer running Windows 7 Enterprise. You need to set up a VPN connection using PPP protocol over SSL (Secure Socket Layer) using HTTPS channel. What type of VPN connection would you need?
Answer:
Renew 70-680 practice test:
Q136. - (Topic 6)
You have an answer file named Unattend.xml for a Windows 7 automated installation.
You need to perform an unattended installation of Windows 7 by using the answer file.
What should you do?
A. Name the answer file as unattend.xml and save it to a floppy disk. Start the computer from the Windows Preinstallation Environment (WinPE).
B. Name the answer file as unattend.xml and save it to a USB disk. Start the computer from the Windows Preinstallation Environment (WinPE).
C. Name the answer file as autounattend.xml and save it to a floppy disk. Start the computer from the Windows 7 DVD.
D. Name the answer file as autounattend.ini and save it to a floppy disk. Start the computer from the Windows 7 DVD.
Answer: C
Explanation: Unattended installation You can perform an unattended installation of Windows 7 by using an installation file called Unattend.xml. These installation files store answers to the questions asked by the Setup Wizard. When the Windows 7 installation process starts, Windows checks for attached USB storage devices that have this file in their root directory. Unattended installations are suitable when you need to deploy Windows 7 to a large number of computers because you do not have to interact with them manually, responding to prompts, as the installation progresses.Building a Reference Installation You configure your reference computer with a customized installation of Windows 7 that you then duplicate onto one or more destination computers. You can create a reference installation by using the Windows product DVD and (optionally) the answer file you created in the previous section. To install your reference computer using an answer file, perform the following procedure:
1. Turn on the reference computer. Insert the Windows 7 product DVD and the UFD containing the answer file (Autounattend.xml) that you created in the previous section. Note that the use of an answer file is optional, although it is the method Microsoft recommends. If you prefer, you can install Windows 7 manually from the installation DVD-ROM.
2. Restart the computer by pressing CTRL+ALT+DEL. You may have to override the boot order to boot from the CD/DVD-ROM disk. If so, select the appropriate function key to override the boot order during initial boot. Windows Setup (Setup.exe) starts automatically and searches the root directory of all removable media for an answer file called
Autounattend.xml.
3. After Setup finishes, you can validate that all customizations were applied. For example, if you included the optional Microsoft-Windows-IE-InternetExplorer feature and set the Home_Page setting in your answer file, you can verify these settings by opening Internet Explorer.
4. To prepare the reference computer for the user, you use the Sysprep utility with the /generalize option to remove hardware-specific information from the Windows installation and the /oobe option to configure the computer to boot to Windows Welcome upon the next restart.
Q137. - (Topic 3)
You have a computer that runs Windows 7. You plan to create an image of the computer.
You need to prevent files with the ISO file extension from being included in the image.
What should you do?
A. Run Dism.exe and use the /image parameter
B. Run Dism.exe and use the /scratchdir parameter
C. Run Imagex.exe and use the /config parameter
D. Run Imagex.exe and use the /norpfix parameter
Answer: C
Explanation:
ImageX is a command-line tool that enables the creation of image files for deployment in a manufacturing or corporate IT environment. You can create a configuration file (configuration_list.ini) to determine:
. Which files and folders must be excluded from the capture process when using the /capture option. . Which folders, files, and file types must be excluded from the compression process when using the /compress option. . Whether the .wim file aligns on a 64K boundary or the default 32K boundary.
Q138. - (Topic 3)
You have two computers named Computer1 and Computer2 that run Windows 7. The network is configured as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that both computers can connect to the Internet.
What should you do?
Exhibit:
A. On both computers, set the subnet mask to 255.255.255.255.
B. On both computers, set the default gateway to 192.168.0.254.
C. On both computers, set the default gateway to 131.107.0.254.
D. On the internal interface of the firewall and on both computers, set the subnet mask to 255.255.0.0.
Answer: B
Explanation: Need to make the default gateways for both computers match the Internal IP Address of the Firewall.
Q139. - (Topic 3)
You have a custom image of Windows 7. You plan to deploy the image to computers that are not connected to the corporate network. You need to ensure that a custom application is automatically installed after the image is deployed. What should you do?
A. From Microsoft Deployment Toolkit (MDT), create a custom task sequence and run the New Media Wizard.
B. From Windows System Image Manager (Windows SIM), open the image and add the applications to Pass 1 windowsPE.
C. Create a Group Policy object (GPO) and add a new software installation package.
D. Run Dism.exe and specify the /mount-WIM parameter. Add the application installation files to the image. Modify the winrm.cmd file.
Answer: A
Q140. DRAG DROP - (Topic 4)
You support desktop computers that have Windows 7 Enterprise installed. All computers are configured with system protection on drive C and with a backup task that runs daily at midnight.
One of the users reports that in the morning she has installed a new version of a browser. After the installation, a follower that has favorite shortcuts was replaced with new content.
You need to restore the most recent version of the folder that contains the user data.
What should you do? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order).
Answer: