Cause all that matters here is passing the Microsoft 70-734 exam. Cause all that you need is a high score of 70-734 OEM Preinstallation for Windows 10 exam. The only one thing you need to do is downloading Testking 70-734 exam study guides now. We will not let you down with our money-back guarantee.
Q9. HOTSPOT
You create a custom installation of Windows that contains several XML files.
You deploy a test computer by using the custom Windows installation and notice that some of the installation options are missing.
Which XML file should you inspect to identify all of the missing installation options? To answer, select the appropriate option from each list in the answer area.
Answer:
Q10. You have several reference computers. The computers are configured to always start from a local hard disk drive.
You plan to capture the reference computers.
On each reference computer, you connect a USB flash drive (UFD) that contains an installation of Windows Preinstallation Environment (Windows PE).
You need to ensure that the reference computers start automatically by using Windows PE from the UFD.
What should you do?
A. From the System Properties, modify the Startup and Recovery settings.
B. From the System Configuration utility, modify the Boot settings.
C. Run bdcedit.exe and modify the boot configuration data (BCD) store.
D. From the BIOS options, modify the startup order.
Answer: D
Q11. You have a server named Server1 that runs Windows Server 2012 and has the Windows Deployment Services server role installed.
You recently removed a third-party DHCP server from the network, and then installed the DHCP Server role on Server1.
You create a scope on Server1.
You discover that client computers attempting to receive a Windows 10 image fail to connect to Server1.
You verify that the client computers on the network can receive an IP address from Server1.
You need to ensure that the computers attempting to receive an image can connect to Server1.
Which two actions should you perform? Each correct answer presents part of the solution.
A. From the Windows Deployment Services console, click the DHCP tab, and then select the Do not listen on port 67 check box.
B. From the Windows Deployment Services console, click the DHCP tab, and then select the Configure DHCP option 60 to indicate that this is also a PXE server check box.
C. From the DHCP console, click Server Options, and then set the value of Option 66 to Server1.
D. From the Windows Deployment Services console, click the PXE Response tab, and then set the value of the Delay in seconds to 3.
E. From the DHCP console, click Server Options, and then set the value of Option 67 to install.wim.
Answer: A,B
Q12. You have a server named Server1 that runs Windows Server 2012 and has the Windows Deployment Services server role installed.
You recently removed a third-party DHCP server from the network, and then installed the DHCP Server role on Server1.
You create a scope on Server1.
You discover that client computers attempting to receive a Windows 10 image fail to connect to Server1.
You verify that the client computers on the network can receive an IP address from Server1.
You need to ensure that the computers attempting to receive an image can connect to Server1.
Which two actions should you perform? Each correct answer presents part of the solution.
A. From the Windows Deployment Services console, click the DHCP tab, and then select the Do not listen on port 67 check box.
B. From the Windows Deployment Services console, click the DHCP tab, and then select the Configure DHCP option 60 to indicate that this is also a PXE server check box.
C. From the DHCP console, click Server Options, and then set the value of Option 66 to Server1.
D. From the Windows Deployment Services console, click the PXE Response tab, and then set the value of the Delay in seconds to 3.
E. From the DHCP console, click Server Options, and then set the value of Option 67 to install.wim.
Answer: A,B
Q13. A customer plans to deploy Windows Server 2012 Standard to several servers.
The customer identifies the following hardware requirements for the planned deployment:
You need to identify which two requirements are met by the planned deployment of Windows Server 2012.
Which two requirements should you identify? Each correct answer presents part of the solution.
A. Must be able to back up the server data to a tape device.
B. Must support three-way mirrors without the installation of third-party management software.
C. Must support NIC teaming without the installation of third-part management software.
D. Must be able to run on an x86 hardware platform.
Answer: B,C
Q14. You need to prepare a hard disk for a Unified Extensible Firmware Interface (EUFI)-based computer.
Which three actions should you perform? (Each correct answer presents part of the solution.)
A. Format the Windows partition by using NTFS.
B. Format the Windows partition by using FAT32.
C. Create an EFI partition.
D. Convert the hard disk to a GPT disk.
E. Mark the system partition as active.
Answer: C,D,E
Q15. You have a technician computer named Computer1 and a reference computer named Computer2.
You plan to customize the profile settings on Computer2 by logging on to Computer2. You need to ensure that the current user profile is copied to the default user profile before
the image of Computer2 is captured.
To which configuration pass in the unattended answer file should you add the CopyProfile settings?
A. OfflineServicing
B. specialize
C. oobeSystem
D. windowsPE
E. generalize
F. auditUser
G. auditSystem
Answer: B
Q16. You plan to install operating systems on 500 client computers by using the sources files located in a network share.
You need to identify which operating system must be installed on the computer that hosts the share. The solution must ensure that 25 computers can correct concurrently to the share.
Which two possible operating systems achieve this goal? Each correct answer presents a complete solution.
A. Windows Server 2008 R2 Standard
B. Windows 10 Pro
C. Windows 7 Ultimate
D. Windows 8 Enterprise
E. Windows Server 2012 Standard
Answer: A,E