A Review Of 100% Correct AD0-C102 Exam Question

NEW QUESTION 1
You are -working on a sequence in Adobe Premiere Pro. You would like to create a new graphic in Adobe Photoshop to incorporate in the current sequence. How can you create a new Photoshop file with settings that match the current Premiere Pro sequence?

• A. In the Essential Graphics panel open the New Layer menu and choose Photoshop File.
• B. With the sequence in the Timeline panel, choose Graphics > New > Photoshop file.
• C. Select the sequence in the Project pane
• D. Choose Photoshop File In the New Hem menu.
• E. With the sequence open in the Timeline panel choose File > New > Photoshop File.

Answer: B

NEW QUESTION 2
The Media Cache Files in Premiere Pro are by default stored here:
• Mac Users: Macintosh HD/Users/UserName/Library/Application Support/Adobe/Common
• Windows Users: C:Users\UserName\ AppData\Roaming\Adobe\Common Where can you change this location?

• A. Project Settings > Scratch Disks > Media Cache Files
• B. Sequence > Sequence Settings > Media Cache Files
• C. Preferences > Media Cache > Media Cache Files
• D. Project > Project Settings > Media Cache Files

Answer: B

NEW QUESTION 3
You need lo dean up a noisy audio clip that has been edited into a sequence.
What is the most efficient way to send a clip from the Timeline panel in Adobe Premiere Pro to Adobe Audition?

• A. Select the clip in the Timeline panel and choose File > Export > Send to Audition.
• B. Right-click on the clip in the Timeline panel and choose Edit Clip in Audition.
• C. Drag the clip directly from the Timeline panel into the Files panel in Audition.
• D. Select the clip in the Timeline panel and choose File > Send to Audition.

Answer: A

NEW QUESTION 4
You are working on a project using the latest operating system and a certified supported video card.
How should Adobe Premiere Pro be configured to take advantage of the GPU processing power for faster rendering?

• A. In Preferences > Media, check The box next to Mercury Playback Engine GPU Acceleration.
• B. Choose File > Project Settings > Genera
• C. Under Rendere
• D. choose a Mercury Playback Engine GPU Acceleration option.
• E. Choose Sequence > Sequence Setting
• F. Under Video Renderer choose Mercury Playback Engine GPU Acceleration.
• G. Choose File > Project Settings > Genera
• H. Under Rendere
• I. choose Mercury Playback Engine Software Only.

Answer: C

NEW QUESTION 5
You have a large amount of clips with similar names in a bin. You are searching for a particular visual event. Out you're not sure which clip or when the event occurs.
Using default settings, how can you quickly preview the contents of the clips without opening them in the Source Monitor?

• A. Set the bin to Icon vie
• B. Move the cursor across clip thumbnails without selecting the
• C. The clip contents will be displayed.
• D. Set the bin to Icon vie
• E. Mold Command (macOS) / Ctrl (Windows) while moving the cursor across clip thumbnails.
• F. Select all the clips in the bin and drag them into the Media Browser pane
• G. Use playback controls to preview their contents.
• H. Set the bin to Icon vie
• I. Select the clip you would line to previe
• J. Move the cursor across the dip thumbnails to see the contents.

Answer: C

NEW QUESTION 6
You have an edit that is at its required final duration. but you need to use a clip that is 10 frames shorter than the spate m which you want to place it in the edit. Which tool helps solve this problem?

• A. Slip Tool
• B. Slide Tool
• C. Ripple Edit Tool
• D. Rate Stretch Tool

Answer: B

NEW QUESTION 7
You have been given a USB microphone to record a voiceover.
How can you select the new microphone without opening the application preferences?

• A. Right click the Audio Track Header > Voice-Over Record Settings > Input Choose the USB microphone.
• B. Open the Audio Clip Mixer and enable the track for recordin
• C. Choose the USB microphone.
• D. Open the Essential Sound panel and choose the USB Microphone as the input
• E. In the Timeline panel menu, choose the USB microphone as the default input

Answer: B

NEW QUESTION 8
When you change the label color ofa clip inthe timeline, you also want it to change automatically m the Project panel. How can you accomplish this?

• A. Choose Clip > Label > Display the project item name and label color for all instances.
• B. Choose Project Settings dialog > Display the project item name and label color for all Instances.
• C. Choose Sequence > Label > Display the project item name and label color for all instances.
• D. Choose Edit > Label > Display the project item name and label color for all instances.

Answer: A

NEW QUESTION 9
You want to configure a preset to adjust the timing of keyframes to fit the duration of the target clip. In the Save Preset dialog, which option should you select?

• A. Length
• B. Scale
• C. Proportional
• D. Duration

Answer: A

NEW QUESTION 10
You have added a competeinterviewclip onto a timeline. At the beginning of the dip. there are 10 seconds of material that you want to remove without leavinga gap.
How can you achieve this?

• A. Place the playhead at the location where want this clip to begin and press Q to perform a Ripple Trim to playhead edit.
• B. Enable the Razor Tool to add an edit point at the desired start point and delete the dip to the left of the new edit point.
• C. Select the edit point at the Beginning of your clip and move your playhead to where you want this clip to start and press E.
• D. Using the Selection Tool elide and drag the edit point of the clip and move it to where you want this clip to begin.

Answer: C

NEW QUESTION 11
You have made some changes to the export settings and want to create these settings as an Export preset. How should you do this?

• A. Choose Import Into Project in Export Settings.
• B. Click the Save Preset button In Export Settings.
• C. Choose Save Preset In the Export Settings panel menu.
• D. Click Save Changes as a Preset in Export Settings

Answer: D

Explanation:
https://helpx.adobe.com/lightroom-classic/help/export-presets-settings-plug-ins.html

NEW QUESTION 12
You are working on a mixed media project.
What is the most important parameter when setting up a new sequence?

• A. The aspect ratio of each clip you will work with.
• B. The overall length of the longest clip you will work with.
• C. The codec of the edited film you intend to deliver.
• D. The correct frame rate for the delivery specifications.

Answer: B

NEW QUESTION 13
You are color collecting some clips using the Vectorscope YUV in the Lumetri Scopes panel as a reference. What is the function of this scope?

• A. It displays a circular chart similar to a color wheel, that shows the videos chrominance information.
• B. It displays the vector information of a non-raster di
• C. such as an Illustrator file.
• D. It displays the RGB information on the dip using luminance values.
• E. It displays a horizontal chart with luminance information matching left and right of the clip.

Answer: A

NEW QUESTION 14
You have been given multicamera footage that includes Camera Angle metadata fields.
When creating a Mutt-camera Source Sequence, how can you ensure groups of clips with marching camera angle metadata areautomatically placed on the sametrack?

• A. Select the Create Single Multicam Source Sequence box in the Create Multi-camera Source Sequence dialo
• B. Choose Camera Angle from the drop-flown menu.
• C. Make sure the Camera Angle metadata column b visible in the Project pane
• D. In Sequence Settings, select Camera Angle under Synchronize Point
• E. Select Camera Label from the drop-down menu in the Create Multi-camera Source Sequence dialog.Choose Automatic for the Sequence Preset.
• F. Check the box next to Preserve Camera Angle Metadata beneath Sequence Preset dropdown inthe Create Multi-camera Source Sequence dialog box.

Answer: A

NEW QUESTION 15
You have exported an .MP4 tile with custom is settings re the H.2M codec but the Me size is too large. Which settings should you choose when exporting again to decrease the file size?

• A. Check Use Maximum Render Quality.
• B. Bitrate Settings > Target Bitrat
• C. set a lower number.
• D. Effects > Video Limite
• E. set the File Size limit.
• F. Advanced Settings > Key Frame Distance, set to a lower number.

Answer: C

NEW QUESTION 16
......