Axis AX0-100 audit is one of the most effective accreditations from Axis thus your competition is very. Yet in Axis, your abilities as well as possibilities could possibly get the suitable escape as well as AX0-100 is definitely the great means to this. Encountered the fiercer as well as fiercer competition inside it society, are you feeling good tension? However, you decide to do. Subsequently you?¡¥d superior grab the Axis to be able to take your work. At this time, A lot more It all Accreditation are generally come getting to be able to in life. For example Axis AX0-100 Qualifications. But what to participate this documentation? Actualtests can provide solution.
2021 Aug AX0-100 actual test
Q31. How does the AXIS Design Tool allow users to estimate the effects of scene complexity and motion on bandwidth and storage usage?
A. AXIS Design Tool requires users to manually enter their own estimated bit rate for each camera
B. Users can view model scenario videos and select the scenario that best matches their scene
C. Users can upload recorded surveillance video to allow AXIS Design Tool to make estimates
D. AXIS Design Tool uses a statistical model based on selected camera model
Answer: B
Q32. The term f-stop, or f-number,
A. Relates the focal length of the lens to the zoom factor.
B. Measures the lens' capability to focus on objects at short distance.
C. Is the end position of the focus motor in an autofocus system.
D. Measures the lens' capability to collect light.
Answer: D
Q33. A camera lens with a low f-stop value of 1.2 will outperform a lens with a higher f-stop value due to which one of the parameters below?
A. Better depth of field
B. Better low light capability
C. Improved sharpness
D. Less image artifacts
Answer: B
Q34. Which of the following will allow a customer to have a PTZ camera automatically change between three predefined positions?
A. Configure the camera's I/O ports to control the preset positions
B. Use the Guard Tour capability to switch between the preset positions
C. Switch between the predefined positions using a joystick
D. Use the auto tracking capability to switch between the preset positions
Answer: B
Q35. Two benefits of Axis HDTV cameras supporting the SMTPE standards are
A. Color fidelity and full duplex 2-channel audio.
B. Color fidelity and minimum 25/30 fps frame rate.
C. Minimum 25/30 fps frame rate and full duplex 2-channel audio.
D. Full duplex 2-channel audio and automatic screen calibration.
Answer: B
Improved AX0-100 test engine:
Q36. What is the difference between a zoom lens and a varifocal lens?
A. There is no difference
B. A zoom lens maintains focus when changing field of view
C. A zoom lens always has automatic focus
D. A varifocal lens has a longer field of view
Answer: B
Q37. How can existing coaxial cable be leveraged when installing network cameras?
A. They can be used but are normally in bad shape, making them futile to use
B. They are excellent for power transmission
C. By using a media converter
D. Coax cannot be leveraged for network cameras
Answer: C
Q38. An installation with an AXIS P1344 experiences image flickering. How can this be remedied?
A. Adding white light to the scene
B. Adding IR light to the scene
C. Changing the camera's exposure setting
D. Changing the camera's white balance
Answer: C
Q39. An installer wants to connect and power a P|R sensor from an Axis camera's I/O port. What would be the output DC voltage?
A. 1, 5V
B. 3. 3 V
C. 5V
D. 7 V
Answer: B
Q40. An installer needs a camera to monitor a hallway in an office complex. The hallway is 2.5 m (8 ft 2 in) wide. The customer wants to be able to identify people (80 pixels per face). What is the minimum resolution needed to meet this requirement?
A. 1024x768
B. 1280x720
C. 1920x1024
D. 800 x 600
Answer: B