Our pass rate is high to 98.9% and the similarity percentage between our AZ-102 Exam Dumps and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Microsoft AZ-102 exam in just one try? I am currently studying for the AZ-102 Dumps Questions. Latest AZ-102 Braindumps, Try Microsoft AZ-102 Brain Dumps First.

Microsoft AZ-102 Free Dumps Questions Online, Read and Test Now.

NEW QUESTION 1
HOT SPOT
You create an Azure web app named WebApp1. WebApp1 has the autoscale settings shown in the following exhibit.
AZ-102 dumps exhibit
AZ-102 dumps exhibit
The scale out and scale in rules are configured to have a duration of 10 minutes and a cool down time of five minutes.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
AZ-102 dumps exhibit

    Answer:

    Explanation: AZ-102 dumps exhibit

    NEW QUESTION 2
    You are building a custom Azure function app to connect to Azure Event Grid.
    You need to ensure that resources are allocated dynamically to the function app. Billing must be based on the executions of the app.
    What should you configure when you create the function app?

    • A. the Windows operating system and the Consumption plan hosting plan
    • B. the Windows operating system and the App Service plan hosting plan
    • C. the Docker container and an App Service plan that uses the Bl1 pricing tier
    • D. the Docker container and an App Service plan that uses the SI pricing

    Answer: A

    Explanation: Azure Functions runs in two different modes: Consumption plan and Azure App Service plan. The Consumption plan automatically allocates compute power when your code is running. Your app is scaled out when needed to handle load, and scaled down when code is not running.
    Incorrect Answers:
    B: When you run in an App Service plan, you must manage the scaling of your function app. References:
    https://docs.microsoft.com/en-us/azure/azure-functions/functions-create-first-azure-function

    NEW QUESTION 3
    Your company registers a domain name of contoso.com.
    You create an Azure DNS named contoso.com and then you add an A record to the zone for a host named www that has an IP address of 131.107.1.10.
    You discover that Internet hosts are unable to resolve www.contoso.com to the 131.107.1.10 IP address.
    You need to resolve the name resolution issue.
    Solution: You add an NS record to the contoso.com zone. Does this meet the goal?

    • A. Yes
    • B. No

    Answer: A

    Explanation: Before you can delegate your DNS zone to Azure DNS, you need to know the name servers for your
    zone. The NS record set contains the names of the Azure DNS name servers assigned to the zone. References: https://docs.microsoft.com/en-us/azure/dns/dns-delegate-domain-azure-dns

    NEW QUESTION 4
    HOT SPOT
    You have an Azure Migrate project that has the following assessment properties: Target location: East US
    Storage redundancy: Locally redundant. Comfort factor: 2.0
    Performance history: 1 month Percentile utilization: 95th
    Pricing tier: Standard Offer: Pay as you go
    You discover the following two virtual machines:
    A virtual machine named VM1 that runs Windows Server 2021 and has 10 CPU cores at 20 percent utilization
    A virtual machine named VM2 that runs Windows Server 2012 and has four CPU cores at 50 percent utilization
    How many CPU cores will Azure Migrate recommend for each virtual machine? To answer, select the appropriate options in the answer area.
    NOTE: Each correct selection is worth one point.
    AZ-102 dumps exhibit

      Answer:

      Explanation: Box 2: 4
      4 *0.50 * 0.95* 2 = 3.8
      Note: The number of cores in the machines must be equal to or less than the maximum number of cores (128 cores) supported for an Azure VM.
      If performance history is available, Azure Migrate considers the utilized cores for comparison. If a comfort factor is specified in the assessment settings, the number of utilized cores is multiplied by the comfort factor.
      If there's no performance history, Azure Migrate uses the allocated cores, without applying the comfort factor.
      References:
      https://docs.microsoft.com/en-us/azure/migrate/concepts-assessment-calculation

      NEW QUESTION 5
      Another administrator reports that she is unable to configure a web app named corplod7509086n3 to prevent all connections from an IP address of 11.0.0.11.
      You need to modify corplod7509086n3 to successfully prevent the connections from the IP address. The solution must minimize Azure-related costs.
      What should you do from the Azure portal?

        Answer:

        Explanation: Step 1:
        Find and select application corplod7509086n3:
        1. In the Azure portal, on the left navigation panel, click Azure Active Directory.
        2. In the Azure Active Directory blade, click Enterprise applications. Step 2:
        To add an IP restriction rule to your app, use the menu to open Network>IP Restrictions and click on Configure IP Restrictions
        AZ-102 dumps exhibit
        Step 3:
        Click Add rule
        You can click on [+] Add to add a new IP restriction rule. Once you add a rule, it will become effective immediately.
        AZ-102 dumps exhibit
        Step 4:
        Add name, IP address of 11.0.0.11, select Deny, and click Add Rule
        AZ-102 dumps exhibit
        References:
        https://docs.microsoft.com/en-us/azure/app-service/app-service-ip-restrictions

        NEW QUESTION 6
        DRAG DROP
        You have an Azure Active Directory (Azure AD) tenant that has the initial domain name. You have a domain name of contoso.com registered at a third-party registrar.
        You need to ensure that you can create Azure AD users that have names containing a suffix of
        @contoso.com.
        Which three actions should you perform in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.
        AZ-102 dumps exhibit

          Answer:

          Explanation: The process is simple:
          Add the custom domain name to your directory
          Add a DNS entry for the domain name at the domain name registrar Verify the custom domain name in Azure AD
          References: https://docs.microsoft.com/en-us/azure/dns/dns-web-sites-custom-domain

          NEW QUESTION 7
          You have two subscriptions named Subscription1 and Subscription2. Each subscription is associated to a different Azure AD tenant.
          Subscription1 contains a virtual network named VNet1.VNet1 contains an Azure virtual machine named VM1 and has an IP address space of 10.0.0.0/16.
          Subscription2 contains a virtual network named VNet2. VNet2 contains an Azure virtual machine named VM2 and has an IP address space of 10.10.0.0/24.
          You need to connect VNet1 to VNet2. What should you do first?

          • A. Move VNet1 to Subscription2.
          • B. Modify the IP address space of VNet2.
          • C. Provision virtual network gateways.
          • D. Move VM1 to Subscription2.

          Answer: C

          Explanation: The virtual networks can be in the same or different regions, and from the same or different subscriptions. When connecting VNets from different subscriptions, the subscriptions do not need to
          be associated with the same Active Directory tenant.
          Configuring a VNet-to-VNet connection is a good way to easily connect VNets. Connecting a virtual network to another virtual network using the VNet-to-VNet connection type (VNet2VNet) is similar to creating a Site-to-Site IPsec connection to an on-premises location. Both connectivity types use a VPN gateway to provide a secure tunnel using IPsec/IKE, and both function the same way when communicating.
          The local network gateway for each VNet treats the other VNet as a local site. This lets you specify additional address space for the local network gateway in order to route traffic.
          References: https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-howto-vnet-vnetresource- manager-portal

          NEW QUESTION 8
          You have an Azure subscription that contains three virtual networks named VNet1, VNet2, VNet3.
          VNet2 contains a virtual appliance named VM2 that operates as a router.
          You are configuring the virtual networks in a hub and spoke topology that uses VNet2 as the hub network.
          You plan to configure peering between VNet1 and VNet2 and between VNet2 and VNet3. You need to provide connectivity between VNet1 and VNet3 through VNet2.
          Which two configurations should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

          • A. On the peering connections, allow forwarded traffic.
          • B. On the peering connections, allow gateway transit.
          • C. Create route tables and assign the table to subnets.
          • D. Create a route filter.
          • E. On the peering connections, use remote gateway

          Answer: BE

          Explanation: Allow gateway transit: Check this box if you have a virtual network gateway attached to this virtual network and want to allow traffic from the peered virtual network to flow through the gateway. The peered virtual network must have the Use remote gateways checkbox checked when setting up the peering from the other virtual network to this virtual network.
          References:
          https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-managepeering# requirements-and-constraints

          NEW QUESTION 9
          You have the Azure virtual networks shown in the following table.
          AZ-102 dumps exhibit
          To which virtual networks can you establish a peering connection from VNet1?

          • A. VNet2 and VNet3 only
          • B. VNet2 only
          • C. VNet3 and VNet4 only
          • D. VNet2, VNet3, and VNet4

          Answer: C

          Explanation: The virtual networks you peer must have non-overlapping IP address spaces. The VNet1 and VNhet2 address spaces overlap. The range of VNet2 is contained inside the range of VNet1.
          References:
          https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-managepeering# requirements-and-constraints

          NEW QUESTION 10
          You are troubleshooting a performance issue for an Azure Application Gateway. You need to compare the total requests to the failed requests during the past six hours. What should you use?

          • A. Metrics in Application Gateway
          • B. Diagnostics logs in Application Gateway
          • C. NSG flow logs in Azure Network Watcher
          • D. Connection monitor in Azure Network Watcher

          Answer: A

          Explanation: Application Gateway currently has seven metrics to view performance counters.
          Metrics are a feature for certain Azure resources where you can view performance counters in the portal. For Application Gateway, the following metrics are available: Total Requests
          Failed Requests Current Connections Healthy Host Count Response Status Throughput Unhealthy Host count
          You can filter on a per backend pool basis to show healthy/unhealthy hosts in a specific backend pool References: https://docs.microsoft.com/en-us/azure/application-gateway/applicationgatewaydiagnostics# Metrics

          NEW QUESTION 11
          You have an Azure App Service plan that hosts an Azure App Service named App1.
          You configure one production slot and four staging slots for App1.
          You need to allocate 10 percent of the traffic to each staging slot and 60 percent of the traffic to the production slot.
          What should you add to Appl1?

          • A. slots to the Testing in production blade
          • B. a performance test
          • C. a WebJob
          • D. templates to the Automation script blade

          Answer: A

          Explanation: Besides swapping, deployment slots offer another killer feature: testing in production. Just like the name suggests, using this, you can actually test in production. This means that you can route a specific percentage of user traffic to one or more of your deployment slots.
          Example:
          AZ-102 dumps exhibit
          References:
          https://stackify.com/azure-deployment-slots/

          NEW QUESTION 12
          You plan to migrate an on-premises Hyper-V environment to Azure by using Azure Site Recovery. The Hyper-V environment is managed by using Microsoft System Center Virtual Machine Manager (VMM).
          The Hyper-V environment contains the virtual machines in the following table.
          AZ-102 dumps exhibit
          Which virtual machine can be migrated by using Azure Site Recovery?

          • A. DC1
          • B. SQL1
          • C. CA1
          • D. FS1

          Answer: B

          Explanation: Up to 300 GB OS disk size is supported for generation 2 VMs and BitLocker is not enabled.

          NEW QUESTION 13
          You need to deploy an Azure load balancer named Ib 1015 to your Azure subscription. The solution must meet the following requirements:
          -Support the load balancing of IP traffic from the Internet to Azure virtual machines connected to VNET1016 subnet0.
          -Prov.de 4 Service level Agreement (SWJ of 99.99 percent ability for the Azure virtual machines.
          -Minimize Azure-related costs.
          What should you do from the Azure portal?
          To complete this task, you do NOT need to wait for the deployment to complete. Once the deployment start in Azure, you can move to the next task.

            Answer:

            Explanation: Step 1:
            On the top left-hand side of the screen, click Create a resource > Networking > Load Balancer. Step 2:
            In the Create a load balancer page enter these values for the load balancer: myLoadBalancer - for the name of the load balancer.
            Internal - for the type of the load balancer. Basic - for SKU version.
            Microsoft guarantees that apps running in a customer subscription will be available 99.99% of the time.
            VNET1016subnet0 - for subnet that you choose from the list of existing subnets.
            Step 3: Accept the default values for the other settings and click Create to create the load balancer.

            NEW QUESTION 14
            From the MFA Server blade, you open the Block/unblock users blade as shown in the exhibit.
            AZ-102 dumps exhibit
            What caused AlexW to be blocked?

            • A. An administrator manually blocked the user.
            • B. The user reports a fraud alert when prompted for additional authentication.
            • C. The user account password expired.
            • D. The user entered an incorrect PIN four times within 10 minute

            Answer: B

            NEW QUESTION 15
            HOT SPOT
            You need to configure the Device settings to meet the technical requirements and the user requirements.
            Which two settings should you modify? To answer, select the appropriate settings in the answer area.
            AZ-102 dumps exhibit

              Answer:

              Explanation:
              Box 1: Selected
              Only selected users should be able to join devices Box 2: Yes
              Require Multi-Factor Auth to join devices. From scenario:
              Ensure that only users who are part of a group named Pilot can join devices to Azure AD
              Ensure that when users join devices to Azure Active Directory (Azure AD), the users use a mobile phone to verify their identity.

              NEW QUESTION 16
              SIMULATION
              Click to expand each objective. To connect to the Azure portal, type https://portal.azure.com in the browser address bar.
              AZ-102 dumps exhibit
              AZ-102 dumps exhibit
              AZ-102 dumps exhibit
              AZ-102 dumps exhibit
              AZ-102 dumps exhibit
              AZ-102 dumps exhibit
              When you are finished performing all the tasks, click the ‘Next’ button.
              Note that you cannot return to the lab once you click the ‘Next’ button. Scoring occur in the background while you complete the rest of the exam.
              Overview
              The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design. Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
              Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
              Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
              To start the lab
              You may start the lab by clicking the Next button.
              You plan to deploy several Azure virtual machines and to connect them to a virtual network named VNET1007.
              You need to ensure that future virtual machines in VNET1007 can register their name in an internal DNS zone named corp7523690.com. The zone must NOT be hosted on a virtual machine.
              What should you do from Azure Cloud Shell?
              To complete this task, start Azure Cloud Shell and select PowerShell(Linux). Click Show Advanced Settings, and then enter corp7523690n1 in the Storage account text box and File1 in the File share text box. Click Create storage, and then complete the task.

                Answer:

                Explanation: Step 1: New-AzureRMResourceGroup -name MyResourceGroup
                Before you create the DNS zone, create a resource group to contain the DNS zone.
                Step 2: New-AzureRmDnsZone -Name corp7523690.com -ResourceGroupName MyResourceGroup A DNS zone is created by using the New-AzureRmDnsZone cmdlet. This creates a DNS zone called corp7523690.com in the resource group called MyResourceGroup.
                References: https://docs.microsoft.com/en-us/azure/dns/dns-getstarted-powershell

                NEW QUESTION 17
                SIMULATION
                Click to expand each objective. To connect to the Azure portal, type https://portal.azure.com in the browser address bar.
                AZ-102 dumps exhibit
                AZ-102 dumps exhibit
                AZ-102 dumps exhibit
                When you are finished performing all the tasks, click the ‘Next’ button.
                Note that you cannot return to the lab once you click the ‘Next’ button. Scoring occur in the background while you complete the rest of the exam.
                Overview
                The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design. Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
                Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
                Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
                To start the lab
                You may start the lab by clicking the Next button.
                You need to allow RDP connections over TCP port 3389 to VM1 from the internet. The solution must prevent connections from the Internet over all other TCP ports.
                What should you do from the Azure portal?

                  Answer:

                  Explanation: Step 1: Create a new network security group Step 2: Select your new network security group.
                  AZ-102 dumps exhibit
                  Step 3: Select Inbound security rules, . Under Add inbound security rule, enter the following Destination: Select Network security group, and then select the security group you created previously.
                  Destination port ranges: 3389 Protocol: Select TCP
                  AZ-102 dumps exhibit
                  References: https://docs.microsoft.com/en-us/azure/virtual-network/tutorial-filter-network-traffic

                  NEW QUESTION 18
                  Your company recently hired a user named janet-7509087@ExamUsers.com.
                  You need to ensure that janet-7509087@ ExamUsers.com can connect to load balancer named Web- LAB. The solution must ensure that janet-7509087@ ExamUsers.com can modify the backend pools. What should you do from the Azure portal?

                    Answer:

                    Explanation: Step 1:
                    In the navigation list, choose Load Balancer.
                    AZ-102 dumps exhibit
                    Step 2:
                    Locate the load balancer named Web-ALB, and click the Access icon. Step3:
                    In the Users blade, click Roles. In the Roles blade, click Add to add permissions for the user Janet- 7509087@ExamUsers.com.
                    Step 4:
                    Add permission to modify backend pools References:
                    https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-manage-permissions

                    NEW QUESTION 19
                    You have an Azure subscription that contains 100 virtual machines. You regularly create and delete virtual machines.
                    You need to identify unused disks that can be deleted. What should you do?

                    • A. From Microsoft Azure Storage Explorer, view the Account Management properties.
                    • B. From the Azure portal, configure the Advisor recommendations.
                    • C. From Cloudyn, open the Optimizer tab and create a report.
                    • D. From Cloudyn, create a Cost Management repor

                    Answer: A

                    Explanation: You can find unused disks in the Azure Storage Explorer console. Once you drill down to the Blob containers under a storage account, you can see the lease state of the residing VHD (the lease state determines if the VHD is being used by any resource) and the VM to which it is leased out. If you find that the lease state and the VM fields are blank, it means that the VHD in question is unused.
                    Note: The ManagedBy property stores the Id of the VM to which Managed Disk is attached to. If the ManagedBy property is $null then it means that the Managed Disk is not attached to a VM References:
                    https://cloud.netapp.com/blog/reduce-azure-storage-costs

                    NEW QUESTION 20
                    HOT SPOT
                    You have an Azure Active Directory (Azure AD) tenant named adatum.com. Adatum.com contains the groups in the following table.
                    AZ-102 dumps exhibit
                    You create two user accounts that are configured as shown in the following table.
                    AZ-102 dumps exhibit
                    To which groups do User1 and User2 belong? To answer. select the appropriate options in the answer area.
                    NOTE: Each correct selection is worth one point.
                    AZ-102 dumps exhibit

                      Answer:

                      Explanation: Box 1: Group 1 only First rule applies
                      Box 2: Group1 and Group2 only Both membership rules apply.
                      References: https://docs.microsoft.com/en-us/sccm/core/clients/manage/collections/createcollections

                      P.S. Easily pass AZ-102 Exam with 195 Q&As 2passeasy Dumps & pdf Version, Welcome to Download the Newest 2passeasy AZ-102 Dumps: https://www.2passeasy.com/dumps/AZ-102/ (195 New Questions)