Up To The Minute Specialist - Implementation Engineer PowerEdge Version 2.0 DES-4122 Exam

NEW QUESTION 1

Which rear disk drive option is available in a Dell EMC PowerEdge R740xd server?

• A. 4x 3.5" drives
• B. 2x3.5" drives
• C. 8x2 5" drives
• D. 6x2 5" drives

Answer: B

NEW QUESTION 2

An engineer needs to install an additional PSU on an existing, single PSU Dell EMC PowerEdge R740. They complete the initial installation and cabling procedures. They connect an AC cable and the power distribution unit produces normal AC output. The engineer checks power management and sees that the new PSU is in the Failed state.
What task should be completed to troubleshoot this issue?

• A. Confirm the System Input Power CAP is not set to Low
• B. Set the PSU AC redundancy to 1+1
• C. Set the PSU AC redundancy to 1+0
• D. Verify the new PSU is the same type and wattage rating

Answer: D

NEW QUESTION 3

An engineer wants to fully leverage Microsoft Windows Server 2016 for TPM-based guarded host deployment of a 14G server Which BIOS settings need to be used for installing the Windows server?

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: C

NEW QUESTION 4

A system engineer has a 14G Dell EMC Poweredge server with an amber light blinking. The engineer must pull a SupportAssist collection before calling Dell Support to evaluate what the potential problem. Use the simulator to collect and view the SupportAssist collection.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 5

A technician needs to update the IDRAC license on a Dell EMC PowerEdge R740 server from Express to Enterprise. The server has the following components:
* 2x CPUs
* 384 GB RAM
* 6x 1 TB drives
* 1x PSU
The server is connected to active AC, but it is powered down, and it needs to stay powered down No errors are presently displayed
How can the technician upgrade the license?

• A. The license cannot be upgraded on a single PSU system
• B. Power on the server, then connect to the iDRAC and upgrade iDRAC license before powering down the server
• C. The license cannot be upgraded because the user will not allow the server to be powered on
• D. Connect to the iDRAC GUI and upgrade the .DRAC license while the server .s powered down

Answer: A

NEW QUESTION 6

What are the default settings used when applying firmware and a configuration to a replaced part using the Lifecycle Controller?

• A. Firmware: Upgrade to latest available version Configuration Apply always
• B. Firmware Allow version upgrade only Configuration: Disabled
• C. Firmware: Match firmware of replaced part Configuration Apply always
• D. Firmware DisabledConfiguration Apply only if firmware match

Answer: C

NEW QUESTION 7

A technician needs to change the iDRAC password on a Dell EMC PowerEdge 14G server in a lights-out datacenter. The be rebooted because it is in production. The iDRAC is configured with the default credentials
How could the technician change the iDRAC password?

• A. SupportAssist Enterprise
• B. iDRAC Web GUI
• C. OpenManage Server Administrator
• D. Virtual Console; press F2 after rebooting system

Answer: A

NEW QUESTION 8

What is a valid password option available from the iDRAC9 Unique ID feature?

• A. Encryption Default
• B. Secure Default
• C. Legacy Generated
• D. Randomly Generated

Answer: D

NEW QUESTION 9

What must be done before upgrading OMSA from the 32-bit to the 64-bit version?

• A. Save the license file
• B. Disable UAC
• C. Back up the configuration
• D. Uninstall the earlier version

Answer: A

NEW QUESTION 10

A technician installs eight servers into a fully operational rack with top of rack switch Each server has a quad 1Gb NIC and redundant power supplies The company uses iDRAC in shared LOM mode with LOM1 as the selected NIC
What should the technician do to verify iDRAC connectivity on each server?

• A. iDRAC Datacenter license is installed.
• B. Ethernet port LOM1 is cabled and the link light is green.
• C. iDRAC dedicated NIC port is cabled and the link light is green
• D. iDRAC Enterprise license is installed

Answer: C

NEW QUESTION 11

For a temporary migration task the CPU core count on the Dell EMC PowerEdge R640 server needs to be reduced to 8 because the installed application will not work due to license restrictions. Use the simulator to apply the change so the application can be installed.
When you have finished using the simulator, click Next.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 12

What is required for iDRAC Direct 2.0 to connect with IDRAC9 interfaces such as RACADM and WSMAN?

• A. Wi-Fi connection
• B. NFC connection
• C. Ethernet cable
• D. Micro-AB USB

Answer: D

NEW QUESTION 13

A technician wants to remotely log in to a server but finds that the IDRAC virtual Console feature Is not available. Use the simulator to explore the system. What Is the cause of this Issue?


Note: It is necessary to dose (x) the simulator window before you can select a response to this question.

• A. The Virtual Console is disabled
• B. Operating system not installed on remote server
• C. The server has been powered down
• D. There are more than the maximum number of active sessions

Answer: C

NEW QUESTION 14

What are key values related to systems management when deploying OpenManage Enterprise wit Dell EMC PowerEdge servers?

• A. AutomateBasic Hardware Element Management Agent-free ManagementSimple and effective
• B. SimplifyBasic Hardware Element Management Agent-free ManagementFee-based license
• C. SimplifyFee-based license Agent-free Management Secure
• D. Simplify Unify AutomateSecure

Answer: C

NEW QUESTION 15

What is the correct order of steps taken during the BIOS/UEFI Recovery process?

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 16
......