Our pass rate is high to 98.9% and the similarity percentage between our H12-224 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the HUAWEI H12-224 exam in just one try? I am currently studying for the HUAWEI H12-224 exam. Latest HUAWEI H12-224 Test exam practice questions and answers, Try HUAWEI H12-224 Brain Dumps First.
HUAWEI H12-224 Free Dumps Questions Online, Read and Test Now.
NEW QUESTION 1
Which of the following BGP attributes can define a set of destination addresses with the public characteristics?
- A. origin
- B. Community
- C. A
- D. Path
- E. MED
Answer: B
NEW QUESTION 2
In most cases, optical power is expressed in dbm, which of the following values in dbm is supported by most optical transceiver devices to receive and identify data ?
- A. -30DBM
- B. -10DBM
- C. 10DBM
- D. 30DBM
Answer: A
NEW QUESTION 3
Compared with traffic policing, traffic shaping uses queues to cache the traffic that exceeds the limit which of the following statements regarding traffic shaping is false?
- A. Compared with traffic policing traffic shaping has good anti-burst capability
- B. Traffic shaping enables packets to be transmitted at an even rate
- C. Because queues are used the delay is added when congestion occurs.
- D. Compared with traffic policing traffic shaping is more suitable for voice service
Answer: D
NEW QUESTION 4
LDP uses Discovery messages to discover neighbors through different neighbor discovery mechanisms. Which of the following statements regarding basic discovery mechanisms are true? (Multiple Choice)
- A. The destination IP address of the LDP Discovery message is the multicast IP address 224.0.0.2
- B. The LDP Discovery message is sent to the specified LDP peer
- C. The LSR does not does not send Hello messages any longer after TCP connections are established
- D. The LDP Discovery message is encapsulated into a UDP packet and its destination port number is 646
Answer: AD
NEW QUESTION 5
On the DiffServ network, what is the main purpose of defining the service type of the EF classification?
- A. Preferentially guarantee the services that require short delay low packet loss low jitter and assured bandwidth
- B. Provide channels for packet forwarding
- C. Ensure bandwidth for specific traffic
- D. Ensure that packets are forwarded with the minimum delay
Answer: A
NEW QUESTION 6
Which of the following statements regarding virtual link is false?
- A. If a virtual link exists in a network design problems often exist and need to be optimized.
- B. The existence of virtual link increases network complexity
- C. Virtual link may lead to loops
- D. The interval for sending Hello packets on a virtual link is 10s
Answer: D
NEW QUESTION 7
The greatest difference between a Fat AP and a Fit AP provides access to more users, has higher performance, and is more applicable to large networks.
- A. TRUE
- B. FALSE
Answer: B
NEW QUESTION 8
Which of the following operations should be performed preferentially for telnet login failure troubleshooting?
- A. Check whether the client can ping the server
- B. Check whether the number of login users reaches the upper limit
- C. Check whether an ACL is configured in the VTY user interface view
- D. Check whether the access protocol is correctly configured VTY user interface view
Answer: A
NEW QUESTION 9
In static LACP mode, the active interfaces selected by devices at both ends must be the same, otherwise, a LAG cannot be set up active interfaces based on the Active side. So, in static LACP mode, how is the Active side be selected?
- A. The end with a smaller LACP system priority functions as the Active sid
- B. If the two ends have the same LACP system priority, the
- C. The end with a smaller MAC address is selected as the Active side.
- D. The end with a higher LACP system priority functions as the Active sid
- E. If the two ends have the same LACP system priority, the
- F. The end with a lower LACP system priority functions as the Active sid
- G. If the two ends have the same LACP system priority, the
Answer: D
NEW QUESTION 10
Which of the following statements regarding OSPF neighbor relationship and adjacency is true?
- A. OSPF routers must establish an adjacency before exchanging information.
- B. Not all neighbors can establish adjacencies.
- C. Adjacencies are maintained using OSPF Hello Protocol
- D. Neighbor relationships are selected from adjacencies to exchange routing information
Answer: B
NEW QUESTION 11
Which of the following statements regarding PIM-DM is false?
- A. PIM-DM stands for Protocol independent Multicast-Dense Mod
- B. It is a dense-mode multicast routing protocol.
- C. PIM-DM assumes that each subnet on a network has at least one receiver station interested in the multicast source.
- D. PIM-DM uses the graft mechanism to restore multicast packet forwarding proactively
- E. PIM-DM does not have periodic flood-prune processes
Answer: D
NEW QUESTION 12
How is CAPEX defined?
- A. Cost expenditure
- B. Capital expenditure
- C. One-time expenditure
- D. Daily expenditure
Answer: B
NEW QUESTION 13
Which of the following command is used to apply the traffic policy to an interface on an AR router?
- A. traffic-policy pi inbound
- B. traffic classifier pi inbound
- C. traffic behavior pi inbound
- D. services-policy pi inbound
Answer: A
NEW QUESTION 14
Which of the following statements regarding OSPF packets are true?
- A. An interface sends Hello packets immediately after being added to an OSPF area
- B. After receiving a LSA Update packet a router must send a LSAck packet for acknowledgement
- C. LSA Update packets carrying detailed LSAs are sent to synchronize the ISDB
- D. LSA Update packets are sent only when adjacencies are established
Answer: AC
NEW QUESTION 15
When the Hold Time parameter negotiated between two BGP peers is 0, no keepalive messages will be sent.
- A. True
- B. False
Answer: A
NEW QUESTION 16
The peer default-mute-advertise command is executed on a BGP muter to advertise
a default mute to neighboring routers. Which of the following statements regarding the change of local BGP muting table is true?
- A. An inactive default mute will be generated in the local BGP muting table, but this mute will not be delivered to the IP muting table
- B. An active default mute will be generated in the local BGP muting table and delivered to the IP muting table.
- C. No default mute will be generated in the local BGP muting table
- D. A default mute will be generated in the local BGP muting tabl
- E. Whether the default muting will be delivered to the IP muting table default
Answer: C
NEW QUESTION 17
......
100% Valid and Newest Version H12-224 Questions & Answers shared by 2passeasy, Get Full Dumps HERE: https://www.2passeasy.com/dumps/H12-224/ (New 392 Q&As)