The Up To The Minute Guide To HPE0-J57 Test

NEW QUESTION 1
You have just completed a performance analysis of an HPE 3PAR StoreServ 8400 disk array with different tiers at a customer’s site. After reviewing the performance metrics, you determine that they should install a new tier of SSD drives.
Which actions should you recommend they take to fully optimize the array? (Choose two.)

• A. Configure Adaptive Flash Cache.
• B. Configure scheduled tunesys tasks.
• C. Rebalance all flash drives between nodes 0 and 2.
• D. Configure Adaptive Optimization.
• E. Configure dedicated drives to enable Adaptive Flash Cache.

Answer: BD

NEW QUESTION 2
A customer asks for a 50 TB disk-based backup solution with deduplication. They also need additional storage for test/dev purposes.
Which single HPE storage platform can you present to the customer that will meet both of their needs?

• A. HPE Nimble SF series
• B. HPE StoreEasy Gateway
• C. HPE StoreOnce
• D. HPE Nimble CS series

Answer: C

NEW QUESTION 3
A customer has a new Nimble CS3000 21T storage systems and is facing latency issues for his 2TB ERP database. What would be a design approach to solve this issue ?

• A. Perform controller upgrade to a Nimbel CS3000 storage systems
• B. Add additional SSd drives as cache to the system and PIN the volume
• C. Enable storage tiering on the system and map the volume to the new tier
• D. Change RAID of the drives to RAID -1and setup quality of services for the volume

Answer: B

NEW QUESTION 4
Refer to the exhibit:

Which type of data format do you expect in the red rectangle?

• A. 172.16.31.11/24
• B. 94:b4:0f:cd:34:8a
• C. iqn.2015-02.com.hpe:oneview-vcgeDav000
• D. 20110002AC00736E235.524

Answer: D

NEW QUESTION 5
A customer need to implement a new SAN fabric for their growing environment .The new SAN should provide a high performance and port–efficient network with many-to-many connectivity .Because of changing requirement and the possible acquisition of another company in the near future. The customer cannot predit the I/O traffic pattern within the SAN .The customer also concerned about availability. Which type of SAN topology should you recommend?

• A. Core-edge fabric
• B. Single switch fabric
• C. Cascaded fabric
• D. Meshed fabric

Answer: D

NEW QUESTION 6
A customer needs to store a large amount of unstructured data that must be queried quickly. Which type of storage meets the customer’s needs?

• A. object
• B. hash
• C. file
• D. flash

Answer: A

NEW QUESTION 7
A customer has an excisting environment with 3PAR,Nimble and MSA. They are providing file servicing from all arrays with multiple virtual machine but preference is not adequate.
What should you add to the environment to increase performance ,increase availability, and reduce management overhead?

• A. StoreEasy 3850 Gateway
• B. StoreEasy 5000
• C. 3PAR File Persona
• D. Simplvity 380

Answer: A

NEW QUESTION 8
Which SAN topology offers the highest centralized data access performance?

• A. Meshed
• B. Cascaded
• C. Core-Edge
• D. Ring

Answer: C

NEW QUESTION 9
A customer currently has a CS1000H and wants to upgrade to a CS3000. What must be considered before upgrading?

• A. This upgrade is disruptive and needs planned downtime.
• B. A capacity upgrade to a fully populated array has to be performed first.
• C. Timeless storage support is not offered for CS1000H entry-level systems.
• D. A controller upgrade to a CS1000F has to be performed first.

Answer: B

NEW QUESTION 10
A customer uses Recovery manager central for Vmware (RMC-V).They need to ability to perform granular recovery of application item directly from backups...Which solution integrates with RMC-V to provide the desired requirements?

• A. Veeam Backup & Replication
• B. Netbackup
• C. StoreOnce cloudbank
• D. CommVault

Answer: A

NEW QUESTION 11
Which built-in HPE 3PAR StoreServ technology reduces database transaction logs response time?

• A. Express Writes
• B. Adaptive Flash Cache
• C. Thin provisioning
• D. Thin Deduplication

Answer: B

NEW QUESTION 12
Which statement describes HPE StoreVirtual Network RAID functionality?

• A. Redundancy is managed on a per-volume basis.
• B. With Network RAID 10+2 data is striped and mirrored across two or more storage systems.
• C. Network RAID 10 requires an even number of storage nodes.
• D. Volumes remain available if an odd number of nodes are available.

Answer: D

NEW QUESTION 13
You are presenting a Nimble solution based on CS3000 hardware to a customer. Which support advantage will be provided with this solution(select two)

• A. Customers always interact with a 3rd level support engineer ,when needed
• B. Customers only have to deploy a service processor for automating support tasks.
• C. Infosight handles the work of 1st and 2nd level support specialist Infosight offers predictive analytics and integration into HPE support center using insight Online.
• D. Infosight performs firmware and software updates without additional administrative support.

Answer: AC

NEW QUESTION 14
Which statement is correct when comparing functionalities of the AF,CF, and SF series in the nimble storage portfolio?

• A. Zero copy clone are unique feature of all flash array within the nimble portfolio
• B. SF series supports storage snapshots and replication using veeeam backup & replication CS and AF series support storage snapshot only.
• C. Inline deduplication for complete array capacity in combination with compression is offered by the AF and SF series only (67) need to check
• D. 99.9999% availability measured and guaranteed for AF and CF series arrays, SF series array offer 99.999% availability.

Answer: C

NEW QUESTION 15
A large enterprise is experiencing exponential data growth of their existing Oracle databases. They are concerned about their increasing backup windows and the risk of non-compliance with recovery time objectives increase of data corruption in primary storage. Their primary storage is an 3PAR Storeserv 8400,and their backup target is an HPE StoreOnce System. Which HPE storage solution allow the customer to migrate this risk?

• A. RMC Express protect
• B. Catalyst in-Flight compression
• C. 3 PAR remote copy
• D. StoreOnce unified deduplication

Answer: A

NEW QUESTION 16
During which event will HPE 3par Storeserv persistent port feature provide transparent and uninterrupted failover (Select two)

• A. Loss of persistent cache
• B. B-series SAN switch upgrades
• C. Firmware upgrade
• D. Node maintenance or failure
• E. Loss of full-mesh cluster interconnect

Answer: CD

NEW QUESTION 17
While demonstrating an HPE 3PAR StoreServ 9450 array, the customer asks you to demonstrate the File Persona features.
Which objects do you need to create to demonstrate these features? (Choose two.)

• A. File share
• B. Storage container
• C. Host
• D. Remote copy group
• E. Virtual file server

Answer: AE

NEW QUESTION 18
What can move data directly from a snapshot to backup storage independent of backup server software?

• A. SSMC
• B. Virtual Lock
• C. CLI
• D. Express Protect

Answer: D

NEW QUESTION 19
A customer's environment consists of two HPE Synergy frames running VMware vSphere, HPE FlexFabric 5700 switches, and one HPE Nimble HF-series array connected via 10GbE-T ports to the FlexFabric switches. The customer is concerned about performance management of the whole solution stack.
When using infosight with VMvision and analyzing end-to-end latency, which of the components within the stack are displayed? (Choose Three)

• A. ISCSI network(SAN)
• B. Ethernet network (LAN)
• C. storage
• D. application
• E. operating system
• F. host

Answer: ADF

NEW QUESTION 20
Which storage feature is supported by both the HPE StoreVirtual and the HPE 3PAR StoreServ storage, and is a key differentiator of HPE storage solutions in the industry?

• A. Network RAID
• B. Peer Motion
• C. virtual Copy
• D. Dynamic Optimization

Answer: B

NEW QUESTION 21
Due to industry regulation a customer is required to store backup at a separate data center from the company’s main data center. The customer application require fast backup and quick restore increase of data lose. Which solution allow the customer to meet both industry and application requirement?

• A. HPE storeServe 3par in main and secondary data center with RCIP replication between arrays
• B. Nimble AF series in main data center and Nimble SF series in secondary data center
• C. HPE Storeserve 3Par in main data center HPE StoreOnce in secondary data center with RMC
• D. HPR StoreServ 3PAR in main data center and HPE StoreOnce in both main and secondary data center.

Answer: C

NEW QUESTION 22
......