Want to know Examcollection HPE0-V14 Exam practice test features? Want to lear more about HP Building HPE Hybrid IT Solutions certification experience? Study Tested HP HPE0-V14 answers to Rebirth HPE0-V14 questions at Examcollection. Gat a success with an absolute guarantee to pass HP HPE0-V14 (Building HPE Hybrid IT Solutions) test on your first attempt.
Free HPE0-V14 Demo Online For HP Certifitcation:
NEW QUESTION 1
You are managing a HPE ProLinat rack-mount server and need to determine when the Remote Console was most recently used.
Where can you find this information?
- A. System
- B. IML
- C. iLO
- D. Audit
Answer: C
NEW QUESTION 2
You are installing new drives into the internal cage of a HPE ProLiant DL380 server. How is the drive device number set?
- A. The Smart Array controller assigns the device number automatically based on the bay
- B. HPE OneView uses the server profile to assign the device number
- C. The operating system assigns the device number automatically based on the drive installation order
- D. You must use Smart Storage Administrator to assign the device number
Answer: A
NEW QUESTION 3
Which HPE solution brings together CPU, Memory, and Disk with an unpredictable workload into a single management infrastructure?
- A. dHCI
- B. SimpliVity
- C. Nimble
- D. Primera
Answer: B
NEW QUESTION 4
A customer is planning to deploy a branch office server rack. The environment will have the following requirements:
Single rack with 20 HPE ProLiant DL360 Gen10 Servers. Each Server will have 6 x 10G SFP+ Ports.
Each Server will have a dedicated iLO port.
The customer requires that only two switches be used. The customer requires separate control planes.
Which switch configuration can meet these requirements?
- A. 2 x HPE 5945 Series switch with IRF
- B. 2 x Aruba 8325 Series switches with VSX
- C. 2 x HPE 5945 Series switches standalone
- D. 2 x Aruba 8325 Series switches with backplane stacking
Answer: A
NEW QUESTION 5
Match the HPE Tool with its use case. Select all that apply.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation:
One Config Advanced (OCA) - Estimate the power and cooling requirements and weight for a rack of equipment
Single Point of Connectivity Knowledge (SPOCK) - Check compatibility of storage components Products and solutions Now (PSNow) - Download a technical presentation for a DL380 Gen10
NEW QUESTION 6
A customer needs a virtual desktop infrastructure environment to quickly deploy new desktop images to more than 70 onsite contractors. They plan to use HPE ProLiant DL360 Gen10 servers running VMware ESXi connected to a shared storage device. The customer requires deduplication because they are concerned about the required storage capacity for the full clone images.
Which storage device would best address their concerns?
- A. HPE MSA 1040
- B. HPE MSA 2052
- C. HPE Nimble AF20
- D. HPE Nimble HF20C
Answer: D
NEW QUESTION 7
Match the HPE Tool with its use case. Select all that apply.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation:
One Config Advanced (OCA) - Estimate the power and cooling requirements and weight for a rack of equipment
Single Point of Connectivity Knowledge (SPOCK) - Check compatibility of storage components
Products and solutions Now (PSNow) - Download a technical presentation for a DL380 Gen10
NEW QUESTION 8
When is it appropriate for a customer to implement HPE OneView Standard?
- A. To manage multiple servers
- B. To monitor their services
- C. To enable the Advanced iLO license
- D. To update firmware
Answer: B
NEW QUESTION 9
A customer needs a shared storage solution for a virtualization platform that will host a database application. The customer is considering an HPE Nimble array.
Which feature would lead you to propose an HPE Nimble AF40 over an HPE 3PAR All Flash array?
- A. Fibre Channel Connectivity
- B. 10Gb iSCSI support
- C. Supported by Infosight for predictive analytics
- D. Predictable performance event with one failed controller
Answer: C
NEW QUESTION 10
A customer plans to use HPE ProLiant servers for line-of-business applications. They want to configure the servers to increase reliability.
Which workload profile should the customer use?
- A. Virtualization – Max Performance
- B. Transactional Application Processing
- C. I/O Throughput
- D. Mission Critical
Answer: D
NEW QUESTION 11
A customer needs to support both network and storage traffic on their network, which includes Ethernet, iSCSi, and Fibre Channel devices. The customer is concerned about the large amount of cables coming from the various cards inserted in their rack servers, as well as the operational costs in their data center.
Which component addresses these issues?
- A. Converged network adapter
- B. Dual-port 10 GbE FlexLOM
- C. Dynamic Smart Array controller
- D. Fibre Channel host bus adapter
Answer: A
NEW QUESTION 12
A customer needs to centralize their backup environment for their branch office They plan to use HPE StoreOnce with catalyst
What should they implement within their backups software to minimize the network load on the remote site?
- A. source-side deduplication
- B. target-side deduplication
- C. thin provisioning
- D. native compression
Answer: A
NEW QUESTION 13
Drag the correct protocols from the left to their appropriate area on the topology.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation: 
NEW QUESTION 14
A customer reports that their new iSCSI MSA 2052 has failed. You find that the MSA is up and running, but the servers cannot mount their LUNs.
Which troubleshooting steps should you prioritize? (Choose two.)
- A. Use Smart Storage Administrator (SSA) to view the STATS report on the MSA
- B. Use NIC teaming utility to validate the iSCSI initiator configuration
- C. Use remote console to check the switch port configuration
- D. Use remote console to validate the WWNs on the MSA
- E. Use remote console to ensure correct MSA port configuration
Answer: CE
NEW QUESTION 15
Match each workload profile description with the corresponding profile. (Select all that apply.)
- A. Mastered
- B. Not Mastered
Answer: A
Explanation:
Missing Critical - Large number of database operations
Transactional Application Processing - Trades performance for reliability
General Peak Frequency Compute - Maximize processor speed
NEW QUESTION 16
You are discussing storage types with a customer that is configuring their NAS solution. The company's application developers use user-generated media and image files.
For which type of data should this customer use file storage?
- A. Mass storage
- B. Microsoft Exchange database
- C. Server boot volumes
- D. VDI applications
Answer: A
NEW QUESTION 17
Match the speed and protocol with the appropriate component.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation: 
NEW QUESTION 18
Match the storage technology to the storage type.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation:
BLOCK = iSCSi
File = CIFS BLOCK = SAN
File = NFS
NEW QUESTION 19
A customer environment is being managed and monitored with HPE OneView. A review of the OneView log shows that there have been several trap storm events.
Which series of events must take place for OneView to insert a Trap Storm event entry into the log of system events?
- A. SNMP traps from three or more identical hosts have been logged within the past 256 seconds.
- B. Four or more identical SNMP traps have been logged within the past 30 seconds.
- C. Three or more SNMP trap messages have been logged with increasingly critical variable string values.
- D. Four or more ports on the same network switch have reported sequential SNMP trap messages
Answer: C
NEW QUESTION 20
A customer needs to virtualize their storage across physical servers and storage environments. Which HPE solution meets the customer’s needs?
- A. Nimble CS3000
- B. StoreVirtual 4335
- C. StoreVirtual VSA
- D. MSA 2050
Answer: C
NEW QUESTION 21
A customer needs a new environment to support an ERP system. The sizing information you received shows the following requirements:
3 servers with dual AMD processors, 256GB RAM, and 10Gb network connectivity
10TB of high performance shared storage
Cloud-based performance monitoring and analytics
The customer prefers rack mounted equipment.
Identify the components that will meet the customer requirements, then drag the correct components on the left to their appropriate location in the environment on the right.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation: 
NEW QUESTION 22
......
P.S. Easily pass HPE0-V14 Exam with 201 Q&As Downloadfreepdf.net Dumps & pdf Version, Welcome to Download the Newest Downloadfreepdf.net HPE0-V14 Dumps: https://www.downloadfreepdf.net/HPE0-V14-pdf-download.html (201 New Questions)