The Rebirth Guide To NS0-184 Practice Question

NEW QUESTION 1
Which two switch operating system are supported on ONTAP cluster switches? (Choose two.)

• A. Brocade FOS
• B. Cisco NX-OS
• C. CiscoIOS
• D. Broadcom EFOS

Answer: BD

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-systems-switches/pdfs/fullsitesidebar/AFF_and_FAS_Switch_Documentation.pdf

NEW QUESTION 2
Data ONTAP 9 supports which three features? (Choose three.)

• A. SMB 3.0
• B. NFSv2
• C. SnapMirror
• D. Infinite Volumes

Answer: ACD

NEW QUESTION 3
After the successful installation of a NetApp ONTAP cluster, the customer wants to know how to view
Telemetry data. The customer also wants to receive online information about any risks with the cluster and
potential bestpractice gaps.
Which tool satisfies the customer’s requirements?

• A. Active IQ Digital Advisor
• B. Interoperability Matrix Tool
• C. Spot by NetApp
• D. Cloud Manager

Answer: A

Explanation:
Reference: http://docs.netapp.com/us-en/ontap/pdfs/sidebar/Cluster_administration.pdf

NEW QUESTION 4
You completed a 2-node AFF A700 installation according to the poster. You run the disk show -fields
owner command and notice that all drives are assigned to node 1.
In this scenario, which tool would you use to access documentation and guidelines to solve the
issue?

• A. Active IQ Unified Manager
• B. Active IQ One Collect
• C. NET2
• D. NetAppDocs

Answer: D

Explanation:
Reference: https://github.com/NetAppDocs

NEW QUESTION 5
You are expanding an existing 4-node ONTAP 9.8 cluster with a FAS8300 HA pair by adding a new FAS500f HA pair. Before the expansion, you are asked to save the configuration of the cluster to a backup file.
In this scenario, which two ONTAP configuration backup methods are available? (Choose two.)

• A. storage VM
• B. node
• C. cluster
• D. switch

Answer: AC

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-whatsnew/pdfs/fullsitesidebar/TR_4894NetApp_ONTAP_9_9_1_Feature_Overview.pdf

NEW QUESTION 6
You want to add an AFF A400HA pair to an existing cluster. In this scenario,which LIF type is required?

• A. cluster-mgmt
• B. intercluster
• C. data
• D. node-mgmt

Answer: B

Explanation:
Reference: https://docs.netapp.com/us-en/ontapmetrocluster/pdfs/sidebar/Add_a_new_controller_module_to_each_cluster.pdf

NEW QUESTION 7
You want to disconnect a DS224C shelf with 3.8 TB NetApp Storage Encryption (NSE) SSDs to an AFF
A300HApairwithtwoDS224C shelveswith3.8 TB SSDs without NSE in one stack.
In this scenario, how would you add the shelf?

• A. Addtheshelftothe existingstack.
• B. Create a newstackon the HA pairto add the shelf.
• C. Connectthe shelfto anHA pair withNSE drives.
• D. LicenseNSE and add the shelfto thisHA pair as a new stack.

Answer: A

NEW QUESTION 8
You installed a new 2-node FAS500f ONTAP 9.8 switchless cluster that serves NAS volumes to both
NFSv4.1 and SMB clients. The host operating systems have full flow control enabled on their data
ports.
In this scenario, which two flow control settings would you verify? (Choose two.)

• A. Verify thatthedatanetworkportshavefullflowcontroldisabled.
• B. Verifythattheclusternetworkportshavefullflowcontrolenabled.
• C. Verify thatthedatanetworkportshavefullflowcontrolenabled.
• D. Verifythattheclusternetworkportshavefullflowcontroldisabled.

Answer: AB

Explanation:
Reference: https://docs.netapp.com/us-en/ontap/pdfs/sidebar/Network_management.pdf

NEW QUESTION 9
You have a 2-node FAS8300 switchless ONTAP 9.8 clusterthatserves NAS volumes. You have a data
SVMthat connectstothe network usingmultimodeLACPwithVLANtags.
In this scenario, which front-end FAS8300 network port would you create the data LIFs?

• A. a0a
• B. e0e
• C. e0e-100
• D. a0a-100

Answer: B

Explanation:
Reference: https://wikileaks.org/ciav7p1/cms/files/NetApp%20Build%20Document1.docx

NEW QUESTION 10
Which two statements are true about the LIFs that are used for a cluster peer relationship? (Choose two.)

• A. The MTU size must be set to 9000 bytes on all the LIFs used for the cluster peering.
• B. The LIFs must use the default intercluster service policy.
• C. The LIFs must be in dedicated broadcast domains an IPspaces.
• D. At least one LIF per node is required on each cluster.

Answer: BC

NEW QUESTION 11
A host cannot connect to the namespace configured on an NVMe-enabled SVM. In this scenario, what are two reasons for this problem?
(Choose two.)

• A. The namespace has not been added to the subsystem.
• B. The namespace has not be added to the igroup.
• C. The igroup has an incorrect NQN.
• D. The subsystem has an incorrect NQN.

Answer: AD

NEW QUESTION 12
You have completed a base installation and system registration of an AFF A250 system, but you notice that you have one failed drive. Neither ''un-failing'' nor reseating the drive helped to repair it. You must ensure proper replacement of the failed drive.
In this scenario, which two actions should you take? (Choose two.)

• A. Ask the customer to open a technical case with NetApp Support.
• B. Ask the customer for a drive with the same capacity and replace it.
• C. Run Active IQ Config Advisor to collect all the logs on the system.
• D. Power off the system until the drive has been replaced.

Answer: BC

NEW QUESTION 13
Click the Exhibit button.

While you are introducing the customer to the NetApp Support website, they ask you to ensure that the new ONTAP storage array is covered by support before you complete the knowledge transfer procedure. Referring to the exhibit, which two widgets would you select to accomplish this task?
(Choose two.)

• A. Active IQ
• B. Product Support
• C. Systems
• D. Contracts and Warranties

Answer: CD

NEW QUESTION 14
You are preparing for the installation of a new 2-node switchless AFF A250 ONTAP 9.8 cluster and
need to obtain the preinstallation information from the customer.
In this scenario, what are three examples of data required from the customer? (Choose three.)

• A. management IP addresses
• B. cluster switch name
• C. gateway IP address
• D. BMC IP addresses
• E. cluster name

Answer: ABD

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-systems/a250/install-detailed-guide.html#step-1-
prepare-for-installation

NEW QUESTION 15
A storage administrator is trying to upgrade a pair of FAS2520s with internal SATA storage to a new 2-node FAS8300 cluster. The storage administrator wants to preserve the existing data.
In this scenario, which two capabilities are available to the storage administrator? (Choose two.)

• A. the ability to move the volumes from the old nodes to the new nodes
• B. the ability to pull out the tray of internal disks of the FAS2520s and reseat the tray in the internal storage of the FAS8300s
• C. the ability to create a 4-node MetroCluster across the four nodes
• D. the ability to convert the FAS2520s to disk shelves and attach them to the new nodes

Answer: CD

NEW QUESTION 16
A customer requires encryption at rest on every node root volume.
In this scenario, which two encryption solutions will fulfill this requirement? (Choose two.)

• A. NSE
• B. NAE
• C. IPsec
• D. NVE

Answer: BD

Explanation:
Reference: https://docs.netapp.com/us-en/ontap/encryption-at-rest/configure-netapp-volumeencryptionconcept.
html#aggregate-level-encryption

NEW QUESTION 17
Click the Exhibit button.

You want to add an AFF A400 system to an existing 4-node cluster.
Referring to the exhibit, which number points to the ports that are used to cable the new nodes to
the cluster interconnect switches.

• A. 4
• B. 2
• C. 3
• D. 1

Answer: B

NEW QUESTION 18
Click the Exhibit button.

During an ONTAP cluster handover procedure, your customer asks how to identify and solve issues
that might occur on the newly deployed array.
Referring to the exhibit, which two widgets would the customer use to help with these issues?
(Choose two.)

• A. Guide Me
• B. Active IQ
• C. Contracts and Warranties
• D. ASE Corner

Answer: AC

NEW QUESTION 19
You are installing a new ONTAP 9.8 cluster by using System Manager Guided Setup. In this scenario, which IP address is optional?

• A. node A IP address
• B. node B IP address
• C. gateway IP address
• D. cluster IP address

Answer: C

NEW QUESTION 20
You installed two separate clusters in an isolated data center without outbound network
access. The customer wants to troubleshoot issues locally and also create custom Excel reports for
capacity utilization from a local server.
In this scenario, which NetApp tool would satisfy this requirement?

• A. Active IQ Digital Advisor
• B. Cloud Insights
• C. ONTAP System Manager
• D. Active IQ Unified Manager

Answer: D

NEW QUESTION 21
......