Network Appliance NS0-513 Exam Dumps 2021

NEW QUESTION 1
A customer is using SnapVault to backup Snapshot copies from a primary volume to a secondary volume on a clustered Data ONTAP system.
The retention on the secondary volumes must be 90 days. Volume autosize and SnapShotAutoDelete have been enabled for all secondary volumes.
Which two settings will satisfy this requirement? (Choose two.)

• A. Modify the secondary volume with the –autosize–reset true command.
• B. Modify the secondary volume with the –space-mgmt-try-first snap_delete command.
• C. Modify the secondary volume with the –autosize-increment 5GB command.
• D. Modify the secondary volume with the –space-mgmt-try-first volume_grow command.

Answer: AB

NEW QUESTION 2
Your customer wants to replicate data between two NetApp clusters in different data centers. Which two
actions must be performed to accomplish this task? (Choose two.)

• A. A peer relationship must be created between the two clusters.
• B. One inter-cluster LIF on each node must be configured.
• C. Every controller in both clusters must have at least one inter-cluster LIF configured.
• D. Every inter-cluster LIF must be configured on the same port with a data LIF.

Answer: AB

NEW QUESTION 3
Management wants the ability to transfer more data over a low bandwidth network connection. Which action would satisfy the request?

• A. Enable version flexible replication with a SnapMirror policy.
• B. Enable network compression with a SnapMirror policy.
• C. Disable throttle with a SnapMirror policy.
• D. Modify the SnapMirror schedules.

Answer: B

NEW QUESTION 4
You do not want to impact your ongoing SnapMirror relationship between your primary and secondary site. Which step must be taken prior to creating a FlexClone at the disaster recovery site?

• A. Cascade the SnapMirror destination volume to another SnapMirror destination.
• B. Create a Snapshot copy of the SnapMirror destination volume.
• C. Cascade the SnapMirror destination volume to another SnapVault destination.
• D. Create a Snapshot copy of the SnapMirror source volume and wait for it to transfer.

Answer: D

NEW QUESTION 5
How are the FC-VI links cabled in MetroCluster for ONTAP?

• A. one cable to each of the two local FC switches
• B. controller A is cabled to FC switch A, controller B has both cabled to FC switch B
• C. directly to the corresponding local HA partner
• D. directly to the corresponding remote HA partner

Answer: A

NEW QUESTION 6
You are copying your data and replicating it off site. What is the called?

• A. a backup
• B. a demonstration
• C. a version
• D. a Snapshot

Answer: A

NEW QUESTION 7
Which three cascaded relationship types are supported? (Choose three.)

• A. SnapVault from SnapMirror
• B. SnapMirror from SnapMirror
• C. SnapMirror from SnapVault
• D. SnapVault from SnapVault

Answer: ABC

NEW QUESTION 8
Your customer wants to implement version flexible SnapMirror relationships. You want to advise the customer about some of the NetApp best practices regarding version flexible SnapMirror relationships.
Which two statements are true in this scenario? (Choose two.)

• A. The customer will need to upgrade clustered Data ONTAP on one cluster.
• B. The frequency for replicating volumes must be greater than 60 minutes when the versions of clustered Data ONTAP are not the same.
• C. You can create a relationship that transfers a specified set of Snapshot copies in addition to the SnapMirror created Snapshot copies.
• D. You can set up version flexible SnapMirror relationships between Storage Virtual Machines, L—J but not clusters.

Answer: BC

NEW QUESTION 9
Your customer wants to implement a SnapVaultrelationship, but is concerned that the initial transfer will use up all of their network bandwidth. Which solution should you recommend to the customer?

• A. Use the SMTape functionality to back up the source volume to tape and use the tape to transfer the basesnapshot copy to the destination volume.
• B. Set up a SyncMirror relationship to a NetApp controller in the same data center, than ship the controller to the destination site.
• C. Manually copy each directory from the source volume to the destination volume during times when the network utilization is low.
• D. Enable volume efficiency on the destination volume.

Answer: A

NEW QUESTION 10
In which two scenarios would a SnapMirror policy be applied? (Choose two.)
Response:

• A. a log file
• B. a storage virtual machine
• C. a data protection mirror relationship
• D. a SnapVault relationship

Answer: CD

NEW QUESTION 11
A client has a 2 TB volume and has enabled the function to automatically delete Snapshot copies in scenarios where capacity will be exceeded. They have set the trigger for this action to the volume | snap_reserve value.
In this scenario, what would trigger this function?

• A. The volume reaches 95%.
• B. The volume reaches 95% and the space_reserve is at capacity.
• C. The snap_reserve reaches capacity.
• D. The volume reaches 98% and the snap_reserve is at capacity.

Answer: D

NEW QUESTION 12
A previous administrator had configured an external backup system to use node-scoped NDMP for backups, but you want to change this system to use SVM-scoped NDMP. How do you make this change in ONTAP?

• A. Turn off node-scoped NDMP on the SVMs being backed up.
• B. Restart the NDMP service on the cluster.
• C. Restart the NDMP service on the SVMs being backed up.
• D. Turn off node-scoped NDMP on the cluster.

Answer: D

NEW QUESTION 13
A customer wants compression enabled on the SnapVault secondary volume. Which two statements are true? (Choose two.)

• A. A warning message is not displayed when you enable compression on a SnapVault secondary volume.
• B. Data transfers will be storage efficient after enabling compression on the SnapVault secondary volume.
• C. A warning message is displayed when you enable compression on a SnapVault secondary volume.
• D. Data transfers will not be storage efficient after enabling compression on the SnapVault secondary volume.

Answer: CD

NEW QUESTION 14
You have a SnapVault backup from your primary site to your secondary site with a LUN in the volume. In this scenario, what is transferred?
Response:

• A. serial number
• B. UUID
• C. selected Snapshot copies
• D. LUN mapping status

Answer: C

NEW QUESTION 15
Your customer wants to implement a mirroring solution between two NetApp controllers. Which solution would you recommend to the customer?
Response:

• A. Snapshot copies
• B. SnapRestore
• C. SnapMirror
• D. Snapcreator

Answer: C

NEW QUESTION 16
When creating a new workflow in OnCommand Workflow Automation, what is the correct order to apply commands in your new workflow?
Response:

• A. numerically 1-to-999
• B. left to right, top to bottom
• C. largest to smallest
• D. alphabetically A-to-Z

Answer: B

NEW QUESTION 17
You decide to enable SnapMirror network compression on your NetApp clustered Data ONTAP environment. Which two statements are correct about enabling this feature?
(Choose two.)

• A. The data is compressed only while it traverses the network.
• B. The data transfer between the clusters must use the NDMP protocol.
• C. You may only enable SnapMirror network compression on one HA pair in a cluster, and traffic 1-1 is limited to routing through those nodes.
• D. The compression engine creates multiple transfer threads corresponding to the number of CPUs on the source storage system.

Answer: AD