How Many Questions Of NS0-592 Test

NEW QUESTION 1
Click the exhibit button.

A customer’s system reported several errors. There was no disruption, but the customer is concerned about the system’s health.
Referring to the exhibit, which statement is true?

• A. One of the switches has failed.
• B. One of the IOM modules on shelf 20 has failed.
• C. Storage redundancy is degraded.
• D. Port 1D on the system has failed.

Answer: C

NEW QUESTION 2
In a 4-node cluster, nodes 1 and 2 are an HA pair, and nodes 3 and 4 are an HA pair. The following error appears in the log.
12/15/2018 15:48:47 node-2CRITICALclam.node.ooq: Node (name=node- 2, ID= 1001) is out of “CLAM quorum” (reason =quorum update).
In this scenario, which two statements are correct? (Choose two.)

• A. All LUNs are offline in the cluster.
• B. All LUNs are online in the cluster.
• C. Node 1 takes over node 2.
• D. Node 2 takes over node 1.

Answer: AC

NEW QUESTION 3
What is a major difference between NFSv3 and NFSv4.x?

• A. NFSv4.x is stateful, and NFSv3 is stateless.
• B. NFSv4.x requires an auxiliary protocol for status monitoring, and NFSv3 does not.
• C. NFSv4.x is stateless, and NFSv3 is stateful.
• D. NFSv4.x requires an auxiliary protocol for mounting, and NFSv3 does not.

Answer: A

NEW QUESTION 4
A customer reports that a takeover has been disabled on an HA pair. What would be a cause for this to happen?

• A. The HA interconnect is not functioning properly.
• B. There is a disk running too hot.
• C. The interface for the hardware assist has become unavailable.
• D. The cluster network is not functioning properly.

Answer: A

NEW QUESTION 5
Your customer added a new DS2246 shelf to an existing stack on their FAS8060A system. The customer then noticed that the new shelf’s disks appear with the shelf serial number instead of the shelf ID in the sysconfig -r command output.
What is the reason for this problem?

• A. The SAS is cabled incorrectly.
• B. There is failed IOM module in the new shelf.
• C. The ACP is cabled incorrectly.
• D. The new shelf has the same ID as another shelf.

Answer: A

NEW QUESTION 6
Click the exhibit button.

The storage administrator for the company example.com is attempting to join an SVM to their Active Directory as SVM1. The computer account must also be joined to the Secure organizational unit. Attempts to perform this action using the CLI fail with the error message shown in the exhibit. What is the reason for this error?

• A. The requested OU Secure does not exist in the Active Directory and must be created by the Active Directory administrator.
• B. The requested OU Secure has incorrect principal and errored with KRB5KDC_ERR_S_PRINCIPAL_UNKNOWN.
• C. The administrator account password used in vserver cifs create was not entered correctly.
• D. The syntax is incorrect; it should be vserver cifs create -cifs-server svm1 -domain example.com -ou ou=Secure, dc=example, dc=com.

Answer: B

NEW QUESTION 7
Click the exhibit button.


A storage administrator reports that when they enabled Vscan, they began receiving reports of CIFS users having very slow access to all their files. The storage administrator recovered from the issue by disabling Vscan on their SVM. The storage administrator was able to collect perfstat output during the time of the reported slow access, as shown in the exhibit.
In this situation, what is the problem?

• A. The problem is on the SVM, as shown in the scan_latency output.
• B. Vscan server 192.168.100.144 was slower than Vscan server 10.23.23.54 in completing Vscan requests.
• C. Vscan server 10.23.23.54 was slower than Vscan server 192.168.100.144 in completing Vscan requests.
• D. The problem was with both Vscan servers 192.168.100.144 and 10.23.23.54.

Answer: B

NEW QUESTION 8
Click the exhibit button.

Your customer reports that their FAS2554A system reports multi-path HA when running the sysconfig command. However, Config Advisor reports an error about incorrect cabling.
What are the two reasons for the messages? (Choose two.)

• A. Shelves 10 and 20 have different IOM modules and must be in separate stacks.
• B. The FAS2554 system is cabled incorrectly to shelf ID 20.
• C. The DS2246 shelf is wrong; the shelf ID must be 11.
• D. Disk shelves 10 and 20 are cabled incorrectly to each other.

Answer: BD

NEW QUESTION 9
Click the exhibit button.

Your customer added a new DS4246 shelf to their FAS system. They created an aggregate on the new shelf. Two weeks later, they log in to Active IQ and discover the Medium Impact error shown below.
“Both SAS connections from one controller go to the same shelf.” Referring to the exhibit, which statement is correct?

• A. You are unable to obtain a “Cable Visualization” overview from Active IQ.
• B. A faulty cable is causing the problem.
• C. A faulty IOM is causing the problem.
• D. You can correct this problem without downtime on the FAS system.

Answer: D

NEW QUESTION 10
A new cluster running ONTAP 9.5 has just been installed and you want to create a FlexGroup volume. Which action will accomplish this task?

• A. Use the storage pool create command.
• B. Use the volume create command.
• C. Use the Deploy utility to provision the FlexGroup volume.
• D. Use the volume size command.

Answer: A

NEW QUESTION 11
A non-maskable interrupt event occurs. The system panics and then reboots. In this scenario, what would have caused the panic?

• A. a secd process
• B. a watchdog timer
• C. an ICMP blackhole detector
• D. a volume location distributed database

Answer: B

NEW QUESTION 12
For restore purposes, a storage administrator on an ONTAP system created a FlexClone of a volume that contains a LUN from a specific snapshot. This LUN cannot be seen by a Windows client after a disk rescan is performed by using Disk Management.
In this scenario, which statement is correct?

• A. The cloned LUN must be brought online.
• B. The cloned LUN needs to be mapped to an initiator group.
• C. The cloned volume must be split from the source volume before the LAN can be used.
• D. The cloned LUN must be renamed to a different name than the name of the source LUN.

Answer: C

NEW QUESTION 13
Your customer states that the storage efficiency on their FAS 8200 is far below what they had expected for a VMware NFS datastore. They enabled deduplication three days ago. The job ran every night for only 10-20 minutes, and the space savings now is less than 5%.
What is causing the space savings to be so low?

• A. They have enabled aggregate-level inline data compaction, so the savings are at the aggregate level.
• B. They have enabled aggregate-level inline deduplication, so the savings are at the aggregate level.
• C. They have not enabled volume-level compression.
• D. They have not run a baseline deduplication to scan old data.

Answer: C

NEW QUESTION 14
A customer complains that the copy offload does not work when copying large file from a Windows 8 client between the CIFS shares that are hosted on the same ONTAP cluster.
What are two reasons for this problem? (Choose two.)

• A. Deduplication is not enabled on the destination volume.
• B. The client should be using Windows 10 for ODX support.
• C. The source and target volumes reside on different cluster nodes.
• D. SMB 3.0 disabled on the CIFS SVM.

Answer: AD

NEW QUESTION 15
A field support engineer has just replaced the IOXM on NODE2 on a FAS8080 running ONTAP 9.1. After the replacement, the customer is unable to perform a giveback because the interconnect is down.
In this scenario, which statement is correct?

• A. Verify that there cross-links between the interconnects.
• B. Verify that the installed FC-VI cards are configured properly.
• C. Verify that the interconnect cables on the motherboard are connected correctly.
• D. Verify that the interconnect cables on the IOXM are connected correctly.

Answer: D

NEW QUESTION 16
Click the exhibit button.

A customer has an FC SAN with brocade switches. Each server attached to the SAN gas four FC ports. The customer describes that one of their servers has only four paths to the LUNs configured on the cluster. There should be eight paths on all the other servers. The switch administrator has verified the zone configuration.
Referring to the exhibit, which two actions would you perform to troubleshoot the problem? (Choose two.)

• A. Review the LIF configuration on the cluster.
• B. Review the driver version on the server.
• C. Review that the host side FC link ports are enabled.
• D. Review the igroup configuration on the cluster.

Answer: AB

NEW QUESTION 17
A customer mentions that their intercluster SnapMirror replication operations consistently take much longer than normal. While troubleshooting, you want to initiate a test SnapMirror session to collect performance data.
How would you accomplish this task?

• A. Run the network test-path command to simulate a SnapMirror connection and record the latency/throughput data.
• B. View the active network connections to the node to see if there a large number of active connections.
• C. Use the ifstat command to collect network performance data for the physical interface.
• D. Run the network statistics lif show command for the intercluster LIF to simulate a network connection.

Answer: A

NEW QUESTION 18
Click the exhibit button.

A customer has the ns-switch shown in the exhibit.
Which two statements are true in this scenario? (Choose two.)

• A. User names not present in the local database are looked up in LDAP.
• B. User mapping decisions are always based on the LDAP configuration.
• C. Host names are always resolved using the configured DNS server.
• D. Groups can be looked up both in the local database and in LDAP.

Answer: CD

NEW QUESTION 19
End users are complaining of high latency when accessing an ONTAP 9 luster.
Which command helps you to determine whether there is a storage component that is contributing to this problem?

• A. qos statistics performance show
• B. qos statistics latency show
• C. sysstat -c 30 -M 1
• D. wafltop show -v -cpu -I 10 -c 5-n 6

Answer: A

NEW QUESTION 20
......