Passleader offers free demo for ccna 200 105 exam. "ICND2 Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0)", also known as 200 105 icnd2 exam, is a Cisco Certification. This set of posts, Passing the Cisco 105 200 exam, will help you answer those questions. The 200 105 icnd2 Questions & Answers covers all the knowledge points of the real exam. 100% real Cisco icnd2 200 105 exams and revised by experts!

P.S. Virtual 200-105 answers are available on Google Drive, GET MORE: https://drive.google.com/open?id=17xcyZW-Vd6eZbaGV28ocMyVubJ6pL5PW


New Cisco 200-105 Exam Dumps Collection (Question 11 - Question 20)

Q11. Which feature can you implement to reserve bandwidth for voip calls across the call path?

A. PQ

B. Round Robin

C. CBWFQ

D. RSPV

Answer: D


Q12. Which part of the PPPoE server configuration contains the information used to assign an IP address to a PPPoE client?

A. virtual-template interface

B. DHCP

C. dialer interface

D. AAA authentication

Answer: A


Q13. What three pieces of information can be used in an extended access list to filter traffic? (Choose three)

A. VLAN number

B. TCP or UDP port numbers

C. source switch port number

D. source IP address and destination IP address

E. protocol

F. source MAC address and destination MAC address

Answer: B,D,E


Q14. Which VLAN bridge priority value is assigned by the set span tree root command?

A. 8192

B. 16384

C. 28672

D. 32768

Answer: A

Explanation: 1. Explanations: The set spantree priority command provides a third method to specify the root switch: Source Cisco Website2. Switch-15> (enable)set spantree priority 81923. Spantree 1 bridge priority set to 8192.


Q15. When you are troubleshooting an ACL issue on a router, which command can help you to verify which

interfaces are affected by the ACL?

A. show ip access-lists

B. show access-lists

C. show interface

D. show ip interface

E. list ip interface

Answer: D


Q16. What are three reasons that an organization with multiple branch offices and roaming users might implement a Cisco VPN solution instead of point-to-point WAN links? (Choose three.)

A. reduced cost

B. better throughput

C. broadband incompatibility

D. increased security

E. scalability

F. reduced latency

Answer: A,D,E

Explanation: Cisco VPN solutions provide exceptional security through encryption and

authentication technologies that protect data in transit from unauthorized access and attacks. A Cisco VPN helps you:

Use highly secure communications, with access rights tailored to individual users

Quickly add new sites or users, without significantly expanding your existing infrastructure Improve productivity by extending corporate networks, applications, and collaboration tools Reduce communications costs while increasing flexibility


Q17. Which purpose of the network command in OSPF configuration mode is true?

A. It defines a wildcard mask to identify the size of the network.

B. It defines the area ID.

C. It defines the network by its classful entry.

D. It defines which networks are used for virtual links.

Answer: A


Q18. Routers R1 and R2 are on the same network segment, and both routers use interface Ethernet0/0. If R1 loses communication to R2, which two terns should you check as you begn GigabitEthernetO/0. If R1 lose: troubleshooting? (Choose two )

A. Verify that R2 is using 802 1q encapsulation

B. Verify that the GigabrtEthernet0/0 interfaces on R1 and R2 are configured with the same subnet mask.

C. Verify that the R1 GigabitEthernet0/0 interface is up and the line protocol is down.

D. Verify that R1 and R2 both are using HDLC encapsulation

E. that the R1 GigabitEthernet0/0 interface is up and the line protocol is up.

Answer: B,C


Q19. Which statement about QoS default behavior is true?

A. Ports are untrusted by default.

B. VoIP traffic is passed without being tagged.

C. Video traffic is passed with a well-known DSCP value of 46.

D. Packets are classified internally with an environment.

E. Packets that arrive with a tag are untagged at the edge of an administrative domain.

Answer: E

Explanation: Frames received from users in the administratively-defined VLANs are classified or tagged for transmission to other devices. Based on rules that you define, a unique identifier (the tag) is inserted in each frame header before it is forwarded. The tag is examined and understood by each device before any broadcasts or transmissions to other switches, routers, or end stations. When the frame reaches the last switch or router, the tag is removed before the frame is sent to the target end station. VLANs that are assigned on trunk or access ports without identification or a tag are called native or untagged frames. For IEEE 802.1Q frames with tag information, the priority value from the header frame is used. For native frames, the default priority of the input port is used.

Each port on the switch has a single receive queue buffer (the ingress port) for incoming traffic. When an untagged frame arrives, it is assigned the value of the port as its port default priority. You assign this value by using the CLI or CMS. A tagged frame continues to use its assigned CoS value when it passes through the ingress port.


Q20. What is the minimum command to turn on encryption on SNMP?

A. SNMPV3authpriv

B. SMNPV3authnopriv

C. SNMPV3noauthpriv

D. SMNPV2authnopriv

E. SNMPV2NOAUTHPRIV

F. SNMPV2AUTHNOPRIV

Answer: A


100% Regenerate Cisco 200-105 Questions & Answers shared by Surepassexam, Get HERE: https://www.surepassexam.com/200-105-exam-dumps.html (New 267 Q&As)