It is more faster and easier to pass the Cisco ccna 200 125 syllabus exam by using Pinpoint Cisco CCNA Cisco Certified Network Associate CCNA (v3.0) questuins and answers. Immediate access to the Refresh ccna 200 125 pdf Exam and find the same core area 200 125 ccna v3 0 questions with professionally verified answers, then PASS your exam with a high score now.
P.S. Pinpoint 200-125 pdf are available on Google Drive, GET MORE: https://drive.google.com/open?id=1qSmqe9lmg23sR5XECqlhobCqcIIdpdHn
New Cisco 200-125 Exam Dumps Collection (Question 9 - Question 18)
Question No: 9
Which command can you enter to determine whether serial interface 0/2/0 has been configured using HDLC encapsulation?
A. router#show platform
B. router#show interfaces Serial 0/2/0
C. router#show ip interface s0/2/0
D. router#\show ip interface brief
Answer: C
Question No: 10
Refer to the exhibit.
You have discovered that computers on the 192 168 10 0/24 network can ping their default gateway, but they cannot connect to any resources on a remote network Which reason for the problem is most likely true?
A. The 192.168.12 0/24 network is missing from OSPF
B. The OSPF process ID is incorrect
C. The OSPF area number is incorrect.
D. An ARP table entry is missing for 192.168.10.0.
E. A VLAN number is incorrect for 192.168.10.0.
Answer: A
Question No: 11
The enable secret command is used to secure access to which CLI mode?
A. global configuration mode
B. privileged EXEC mode
C. user EXEC mode
D. auxiliary setup mode
Answer: B
Question No: 12
Which MTU size can cause a baby giant error?
A. 1500
B. 9216
C. 1600
D. 1518
Answer: C
Explanation: http://www.cisco.com/c/en/us/support/docs/switches/catalyst-4000-series-switches/29805-175.html
Question No: 13
Which statement about unicast frame forwarding on a switch is true?
A. The TCAM table stores destination MAC addresses
B. If the destination MAC address is unknown, the frame is flooded to every port that is configured in the same VLAN except on the port that it was received on.
C. The CAM table is used to determine whether traffic is permitted or denied on a switch
D. The source address is used to determine the switch port to which a frame is forwarded
Answer: B
Question No: 14
Which dynamic routing protocol uses only the hop count to determine the best path to a destination?
A. IGRP
B. RIP
C. EIGRP
D. OSPF
Answer: C
Question No: 15
Which two components are used to identify a neighbor in a BGP configuration? (Choose two.)
A. autonomous system number
B. version number
C. router ID
D. subnet mask
E. IP address
Answer: A,E
Explanation:
Use theshow ip bgp neighbors(registeredcustomers only)command to display information about the TCP and Border Gateway Protocol (BGP) connections and verify if the BGP peer is established. The output of theshow ip bgp neighborscommand below shows the BGP state as 'Established', which indicates that the BGP peer relationship has been established successfully.
R1-AGS#show ip bgp neighbors | include BGP
BGP neighbor is10.10.10.2, remote AS 400,internal link
BGP version 4, remote router ID 2.2.2.2 BGP state = Established, up for 00:04:20 BGP table version 1, neighbor version 1 R1-AGS#
Theshow ip bgp neighborscommand has been used above with the modifier| include BGP. This makes the output more readable by filtering the the command output and displaying the relevant parts only.
In addition, theshow ip bgp summary(registeredcustomers only)command can also be used to display the status of all BGP connections, as shown below.
R1-AGS(9)#show ip bgp summary
BGP router identifier 10.1.1.2, local AS number 400 BGP table version is 1, main routing table version 1
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 10.10.10.2 4 400 3 3 1 0 0 00:00:26 0
Question No: 16
When is the most appropriate time to escalate an issue that you are troubleshooting?
A. when you lack proper resources to resolve the issue
B. when you have gathered all available information about the issue
C. when you have been unable to resolve the issue after 30 minutes
D. when a more urgent issue that requires your intervention is detected
Answer: B
Question No: 17
Which three statements about IPv6 prefixes are true? (Choose three.)
A. FF00:/8 is used for IPv6 multicast.
B. FE80::/10 is used for link-local unicast.
C. FC00::/7 is used in private networks.
D. 2001::1/127 is used for loopback addresses.
E. FE80::/8 is used for link-local unicast.
F. FEC0::/10 is used for IPv6 broadcast.
Answer: A,B,C
Question No: 18
Which technology can enable multiple VLANs to communicate with one another?
A. inter-VLAN routing using a Layer 3 switch
B. inter-VLAN routing using a Layer 2 switch
C. intra-VLAN routing using router on a stick
D. intra-VLAN routing using a Layer 3 switch
Answer: A