VMware 2V0-622 Study Guides 2021

NEW QUESTION 1
An administrator has decided to use Auto Deploy in the environment.
Which two considerations must be taken into account before configuring Auto Deploy? (Choose two.)

• A. Hosts in a cluster must be connected to a Distributed Switch.
• B. Host profiles are not supported when using Auto Deploy.
• C. DHCP must be configured to support PXE boot.
• D. Storage DRS must be enabled.
• E. A TFTP server must be setup and running.

Answer: CE

NEW QUESTION 2
VCSA backup can be backed up and sent to different location via several different protocols. Which are three of the supported protocols? (Choose three.)

• A. CIFS
• B. SCP
• C. HTTP
• D. FTPS
• E. AFP

Answer: BCD

NEW QUESTION 3
An administrator is in the process of deploying a new ESXi host.
-The host is able to be added to the vCenter Server’s inventory, but after a short period of time it shows as disconnected.
-The administrator is able to reconnect the host but it then disconnects again after a short period of time. Which is the problem?

• A. Port 902 UDP from the host to the vCenter Server is blocked
• B. Port 443 TCP from the host to the vCenter Server is blocked
• C. Port 902 TCP from the host to the vCenter Server is blocked
• D. Port 443 TCP from the vCenter Server to the host is blocked

Answer: A

Explanation: On 902 port managed hosts send a regular heartbeat to the vCenter Server system. This port must not be blocked by firewalls between the server and the hosts or between hosts.

NEW QUESTION 4
What is the default space threshold for vSphere Storage DRS?

• A. 90%
• B. 70%
• C. 95%
• D. 80%

Answer: D

Explanation: https://kb.vmware.com/s/article/2149938
Load balancing based on Space and IO: Storage DRS dynamically balance the Storage DRS cluster imbalance based on Space and IO threshold set. Default space threshold per datastore is 80% and default IO latency threshold is 15ms.

NEW QUESTION 5
Which metric in the Exhibit would identify high latency for a storage device?

• A. KAVG/cmd
• B. DAVG/cmd
• C. GAVG/cmd
• D. QAVG/cmd

Answer: B

Explanation:

NEW QUESTION 6
Which two statements correctly describe VM-Host affinity rules? (Choose two.)

• A. After creating a VM-Host affinity rule, its ability to function in relation to other rules is not checked.
• B. After creating a VM-Host affinity rule, its ability to function in relation to other rules is predetermined.
• C. When there is more than one VM-Host affinity rule in a vSphere DRS cluster, the rules are applied equally.
• D. When there is more than one VM-Host affinity rule in a vSphere DRS cluster, the rules will be ranked.

Answer: AC

Explanation: If you create more than one VM-Host affinity rule, the rules are not ranked, but are applied equally. Be aware that this has implications for how the rules interact. For example, a virtual machine that belongs to two DRS groups, each of which belongs to a different required rule, can run only on hosts that belong to both of the host DRS groups represented in the rules.
When you create a VM-Host affinity rule, its ability to function in relation to other rules is not checked. So it is possible for you to create a rule that contacts with the other rules you are using. When two VM-Host affinity rules conflict, the older one takes precedence and the newer rule is disabled. DRS only tries to satisfy enabled rules and disabled rules are ignored.

NEW QUESTION 7
The networking team has requested to have a dedicated network for iSCSI traffic. This task has been assigned to the vSphere Administrator.
What is the VMware-recommended way to accomplish this?

• A. Create a custom IP Stack.
• B. Configure the right subnet.
• C. Configure Static Routes on each ESXi Server.
• D. Define a dedicated gateway for the iSCSI vmkernel.

Answer: C

NEW QUESTION 8
An administrator is investigating virtual machine performance issues using ESXTOP. The ESXi host does not have hyperthreading enabled.
Which statistics would be relevant for troubleshooting VM performance issues?

• A. %RDY
• B. %IDLE
• C. %RUN
• D. CORE UTIL(%)

Answer: A

NEW QUESTION 9
Which two statements are true for Predictive DRS? (Choose two.)

• A. It balances resource utilization for virtual machines with unpredictable utilization patterns.
• B. It integrates DRS with vRealize Operations Manager to balance workloads for virtual machines before resource utilization spikes occur.
• C. It balances resource utilization based on a threshold’s algorithm that runs each night.
• D. It determines the best placement and balance of virtual machines based on a threshold’s algorithm that runs each night in vCenter Server 6.5 Database.

Answer: BC

Explanation: Predictive DRS
Predictive DRS is a new feature that leverages the predictive analytics of vRealize Operations Manager with the powerful resource scheduler algorithm of vSphere DRS. Together, these two products enable workload balancing for certain VMs before resource utilization spikes occur, potentially eliminating a great amount of resource contention that might have occurred in the past. vRealize Operations Manager runs its dynamic thresholds algorithm nightly against the VMs on which it collects data. These dynamic thresholds create forecasted metrics for the future utilization of the VMs. The metrics are then passed to vSphere DRS to determine the best placement and balance of VMs before resource utilization spikes occur. Predictive DRS helps prevent resource contention on hosts that run VMs with predictable utilization patterns.

NEW QUESTION 10
An ESXi host has been placed into Quarantine Mode by Proactive HA. What will happen?

• A. Virtual machines will be migrated off the quarantines host if doing so will not violate any DRS affinity and anti-affinity rules or cause increased resource contention.
• B. Newly powered-on virtual machines may be placed on the quarantined host to balance cluster resources.Already powered-on virtual machines will be migrated off of the quarantined host if doing so will not violate any DRS affinity and anti-affinity rules or cause resource contention.
• C. All virtual machines will be migrated off the quarantined host to other hosts in the cluster without regard to DRS rules.
• D. vSphere HA will conduct a failover on all VMs residing on the quarantined host.

Answer: A

NEW QUESTION 11
Which are three supported storage requirements for vCenter Server HA? (Choose three.)

• A. NFS
• B. RDM
• C. vSAN
• D. VMFS
• E. JBOD

Answer: ACD

Explanation: vCenter HA is supported and tested with VMFS, NFS, and vSAN datastores.

NEW QUESTION 12
What two migration paths are supported for Windows vCenter Servers? (Choose two.)

• A. vCenter Server 5.5 with an embedded vCenter Single Sign-On instance on Windows > vCenter Server Appliance 6.5 with an embedded Platform Services Controller appliance.
• B. vCenter Server 6.0 instance on Windows >vCenter Server Appliance 6.5 with an embedded Platform Services Controller appliance
• C. vCenter Server 6.0 instance on Windows >vCenter Server Appliance 6.5 with an external Platform Services Controller appliance
• D. vCenter Server 5.5 instance on Windows >vCenter Server Appliance 6.5 with an embedded Platform Services Controller appliance

Answer: AB

NEW QUESTION 13
Which are the three supported backup types for the vCenter Server Appliance 6.5? (Choose three.)

• A. File-Based Backup
• B. vSphere Storage APIs-Data Protection
• C. Replication
• D. Snapshots
• E. vSphere Data Protection

Answer: ABE

NEW QUESTION 14
Which iSCSI initiator type can be used with any network interface card?

• A. Software iSCSI initiator
• B. Software FCoE adapter
• C. Hardware Independent iSCSI initiator
• D. Hardware Dependent iSCSI initiator

Answer: A

Explanation: A software iSCSI adapter is a VMware code built into the VMkernel. It allows your host to connect to the iSCSI storage device through standard network adapters. The software iSCSI adapter handles iSCSI processing while communicating with the network adapter. With the software iSCSI adapter, you can use iSCSI technology without purchasing specialized hardware.

NEW QUESTION 15
vCenter Server Appliance Instance can be backed up using which Client Interface?

• A. vSphere Client Interface
• B. Virtual Appliance Management Interface
• C. vSphere Web Client Interface
• D. VMware Host Client Interface

Answer: B

NEW QUESTION 16
If vCenter Server 5.5 installation has one or more services deployed remotely, which three services are relocated to vCenter Server 6.5 on upgrade? (Choose three.)

• A. vCenter Inventory Services
• B. vSphere Authentication Proxy
• C. vSphere Web Client
• D. vSphere ESXi Dump Collector
• E. vSphere Syslog Collector

Answer: CDE

NEW QUESTION 17
The administrator set Local OS as the default identity source of vCenter Single Sign-On. A user named “user1” belongs to domain “mydomain” and tries to log in to vCenter Single Sign-On.
Which two user names are appropriate to use for login? (Choose two.)

• A. user1mydomain
• B. mydomain@user1
• C. mydomainuser1
• D. user1@vsphere.local
• E. user1@mydomain

Answer: CE

NEW QUESTION 18
View the Exhibit. The exhibit represents a vCenter HA with external Platform Services Controllers in a highly available deployment.
How many vCenter Server 6.5 licenses are required?

• A. 5
• B. 3
• C. 2
• D. 1

Answer: D

NEW QUESTION 19
What are limits of vCenter Libraries in vSphere 6.5?

• A. Total items 2000, Biggest item size 1TB, total libraries per VC 1000, total items per library 1000 and max number of syncs 16
• B. Total items 4000, Biggest item size 512TB, total libraries per VC 2000, total items per library 2000 and max number of syncs 24
• C. Total items 1000, Biggest item size 1TB, total libraries per VC 1000, total items per library 1000 and max number of syncs 16
• D. Total items 2000, Biggest item size 1TB, total libraries per VC 1000, total items per library 1000 and max number of syncs 32

Answer: A

NEW QUESTION 20
An administrator is trying to add a new virtual disk of 3TB to a virtual machine on a recently upgraded ESXi
6.x host, but receives this error:
The disk capacity entered was not a properly formed number or was out of range. It has been replaced with the nearest acceptable value.
How can the new virtual disk be added to the virtual machine?

• A. Upgrade the VMFS datastore.
• B. Change the VMFS datastore block size to 8MB.
• C. Move the virtual machine to a datastore with free space.
• D. Use vmkfstools to upgrade to VMFS6.

Answer: B