Our pass rate is high to 98.9% and the similarity percentage between our 70-741 exam and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Microsoft 70-741 exam in just one try? I am currently studying for the 70-741 exam. Latest 70-741 dumps, Try Microsoft 70-741 Brain Dumps First.
Online Microsoft 70-741 free dumps demo Below:
NEW QUESTION 1
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2021.
Server1 has Microsoft System Center 2021 Virtual Machine Manager (VMM) installed. Server2 has IP Address Management (IPAM) installed.
You create a domain user named User1.
You need to integrate IPAM and VMM. VMM must use the account of User1 to manage IPAM. The solution must use the principle of least privilege.
What should you do on each server? To answer, select the appropriate options in the answer area.
Answer:
Explanation: On Server1: Create a Run As Account that uses User1.
On Server2: Add User1 to IPAM ASM Administrator Role. https://technet.microsoft.com/en-us/library/dn783349(v=ws.11).aspx https://technet.microsoft.com/en-us/library/jj878348(v=ws.11).aspx
NEW QUESTION 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients.
Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer.
You open the DHCP console as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that all of the Windows 10 computers can receive a DHCP lease. Solution: You start the DHCP Server service.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
Explanation: https://technet.microsoft.com/en-us/library/dd183581(v=ws.10).aspx
NEW QUESTION 3
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. You enable Response Rate Limiting on Server1. You need to prevent Response Rate Limiting from applying to hosts that reside on the network of 10.0.0.0/24. Which
cmdlets should you run? To answer, select the appropriate options in the answer area.
Answer:
Explanation: Set-DnsServerResponseRateLimiting
Add-DnsServerResponseRateLimitingExceptionlist
https://docs.microsoft.com/en-us/powershell/module/dnsserver/set-dnsserverresponseratelimiting?view=win10-p
NEW QUESTION 4
You have an IP Address Management (IPAM) server named IPAM1 that runs Windows Server 2021. IPAM1 manages 10 DHCP servers.
You need to provide a user with the ability to track which clients receive which IP addresses from DHCP. The solution must minimize administrative privileges.
- A. IPAM MSM Administrators
- B. IPAM ASM Administrators
- C. IPAM IP Audit Administrators
- D. IPAM User
Answer: C
Explanation: References: https://technet.microsoft.com/en-us/library/jj878348(v=ws.11).aspx
NEW QUESTION 5
You have a Nano Server that has one network interface. The server is configured to obtain an IP address automatically.
You need to configure the server to have the following IP configurations:
• IP address 172.16.3.100
• Default gateway: 172.163.1
• Subnet mask: 255.255.255.0
What command should you run? To answer, select the appropriate options in the answer area.
Answer:
Explanation: References: https://docs.microsoft.com/en-us/powershell/module/nettcpip/new-netipaddress?view=win10-ps
NEW QUESTION 6
You have a server named Server1 that runs Windows Server 2021. Server1 has the following routing table.
What will occur when Server1 attempts to connect to a host that has an IP address of 172.20.10.50?
- A. Server1 will attempt to connect directly to 172.20.10.50.
- B. Server1 will route the connection to 10.10.0.2.
- C. Server1 will silently drop the connection attempt.
- D. Server1 will route the connection to 192.168.2.1.
Answer: D
Explanation: http://www.techrepublic.com/article/understanding-routing-tables/
NEW QUESTION 7
You have a server named Server1 that runs Windows Server 2021. Server1 has the following IP configuration.
You need to configure the default gateway on Server1 to allow for connectivity to other subnets via IPv6. Which command should you run? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation: References: https://docs.microsoft.com/en-us/powershell/module/nettcpip/new-netroute?view=win10-ps
NEW QUESTION 8
Scenario:
You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.
You install the Remote Access server role on Server2. Server2 has the following configured.
*Network address translation (NAT)
*The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2 You identify the following requirements:
* Add 28 devices to subnet2 for a temporary project.
* Configure Server2 to accept VPN connections from the internet.
* Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.
End of Scenario:
You deploy a computer named Computer8 to subnet4. Computer8 has an IP address of 192.168.10.230 and a subnet mask of 255.255.255.240
What is the broadcast address for Subnet4? To answer, select the appropriate options in the answer area.
Answer:
Explanation: 
NEW QUESTION 9
You have an Active Directory domain named Contoso.com. The domain contains servers named Server1 and Server2 that run Windows Server 2021.
You install the Remote Access server role on Server1. You install the Network Policy and Access Services server role on Server2.
You need to configure Server1 to use Server2 as a RADIUS server. What should you do?
- A. From the Connection Manager Administration Kit, create a Connection Manager profile.
- B. From Routing and Remote Access, configure the authentication provider.
- C. From Active Directory Users and Computers, modify the Delegation settings of the Server1 computer account.
- D. From Server Manager, create an Access Policy.
Answer: D
Explanation: http://www.nyazit.com/configure-network-policy-server-2021/
NEW QUESTION 10
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named adatum.com. The domain contains two DHCP servers named Server1 and Server2.
Server1 has the following IP configuration.
Server2 has the following IP configuration.
Some users report that sometimes they cannot access the network because of conflicting IP addresses. You need to configure DHCP to avoid leasing addresses that are in use already.
Solution: On Server1, you modify the EndRange IP address of the scope. Does this meet the goal?
- A. Yes
- B. No
Answer: A
NEW QUESTION 11
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Refer to exhibit:
Server1 has two virtual machines named VM1 and VM that run Windows Server 2021. VM1 connects to Private1. VM2 has two network adapters.
You need to ensure that VM1 connects to the corporate network by using NAT.
Solution: You connect VM1 to Inernal1. You run the New-NetNatIpAddress and the New-NetNat cmdlets on Server1. You configure VM1 to use Server1 as the default gateway.
Does this meet the goal?
- A. Yes
- B. No
Answer: A
NEW QUESTION 12
You have an IP Address Management (IPAM) server named IPAM1 that runs Window Server 2021. IPAM1 manages all of the DHCP servers on your network.
You are troubleshooting an issue for a client that fails to receive an IP address from DHCP.
You need to ensure that from IPAM1, you can view all of the event data for the DHCP leases from the last 24 hours.
Solution: From Windows PowerShell, you run the Set-IpamDHCPServer cmdlet.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
NEW QUESTION 13
You have a server named Server1 that runs Windows Server 2021.
Server1 is an IP Address Management (IPAM) server that collects DHCP and DNS logs and events for your entire network.
You need to enable a user named TECH1 to create pointer (PTR), host (A) and service location (SRV) records on all of the DNS servers on the network.
What should you do on Server1?
- A. From the IPAM node in Server Manager, assign the IPAM DNS Administrator Role to TECH1 and create a new access scope.
- B. Run the Set-IpamRange cmdlet, and then run the Set-IpamAccessScope cmdlet.
- C. From the IPAM node in Server Manager, create a new user role and a new access policy.
- D. Run the Set-IpanCustomFiels cmdelt, and then run the Set-IpamAddressSpace cmdlet.
Answer: A
Explanation: References:
https://docs.microsoft.com/en-us/windows-server/networking/technologies/ipam/view-roles-and-role-permission
NEW QUESTION 14
You have an Active Directory forest that contains 30 servers and 6,000 Client computers. You deploy a new DHCP server that runs Windows Server 2021. You need to retrieve the list of the authorized DHCP servers. Which command should you run?
- A. Get-DHCPServerDatabase
- B. Netstat -p IP -s -a
- C. Get-DHCPServerInDc
- D. Show-ADAuthenticationPolicyExpression -AllowedToAuthenticateTo
Answer: C
Explanation: To get all authorized DHCP servers in Active Directory, you can use the following PowerShell cmdlet:
Get-DhcpServerinDC
NEW QUESTION 15
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server2 that runs Windows Server 2021.
The DHCP Server server role is installed on Server2. The DNS server role is installed on a server named Server3.
The network contains 500 non-Windows devices that are registered in the DNS zone of contoso.com. You configure Server2 to lease IP addresses to the non-Windows devices.
You need to prevent Server2 from overwriting the host (A) records for the non-Windows devices. What should you run?
- A. dns.exe
- B. dnscmd.exe
- C. netsh.exe
- D. Set-DhcpServerDatabase
- E. Set-DhcpServerv4DnsSetting
- F. Set-DhcpServerv6DnsSetting
- G. Set-DNSServerSetting
Answer: C
Explanation: References:
https://docs.microsoft.com/en-us/windows-server/administration/windows-commands/dnscmd
NEW QUESTION 16
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server1 that hosts a virtual machine named VM1. Server1 and VM1 run Windows Server 2021.
The settings for VM1 are configured as shown in the exhibit below.
You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1.
Solution: You need to enable the Data Exchange integration service for VM1. Does this meet the goal?
- A. YES
- B. NO
Answer: B
NEW QUESTION 17
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients.
Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer.
You open the DHCP console as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that all of the Windows 10 computers can receive a DHCP lease. Solution: You increase the scope size.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
Explanation: https://technet.microsoft.com/en-us/library/dd183581(v=ws.10).aspx
NEW QUESTION 18
You are configuring internal virtual networks to support multitenancy communication between tenant virtual machine networks and remote sites.
You have a tenant named Tenant1.
You need to enable Border Gateway Protocol (BGP) for Tenant1.
Which commands should you run? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Answer:
Explanation: 
NEW QUESTION 19
You have a remote access server named Server1 that runs Windows Server 2021. Server1 has DirectAccess enabled.
A firewall connects Server1 to the Internet.
You need to configure the firewall to ensure that DirectAccess clients can connect to Server1 by using Teredo, 6to4, and IP-HTTPS.
Which inbound port should be open on the firewall for each transition technology?
To answer, drag the appropriate ports and protocols to the correct transition technologies. Each port and protocol may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation: 
NEW QUESTION 20
You have a server named Server1 that has a Server Core installation of Windows Server 2021. Server1 is configured to obtain an IP address automatically.
You need to configure the IPv4 address, netmask, and default gateway manually for a network interface named Ethernet on Server1.
What should you run?
- A. ipconfig.exe
- B. New-NetiPAddress
- C. Set-NetAdapter
- D. Set-NetIPv4Protocol
Answer: B
Explanation: References:
https://docs.microsoft.com/en-us/powershell/module/nettcpip/new-netipaddress?view=win10-ps
100% Valid and Newest Version 70-741 Questions & Answers shared by 2passeasy, Get Full Dumps HERE: https://www.2passeasy.com/dumps/70-741/ (New 235 Q&As)