Proper study guides for Replace Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) certified begins with Cisco 300-075 preparation products which designed to deliver the Refined 300-075 questions by making you pass the 300-075 test at your first time. Try the free 300-075 demo right now.
Q131. When you configure QoS on VCS, which settings do you apply if traffic through the VCS should be tagged with DSCP AF41?
A. Set QoS mode to DiffServ and tag value 32.
B. Set QoS mode to IntServ and tag value to 34.
C. Set QoS mode to DiffServ and tag value 34.
D. Set QoS mode to IntServ and tag value to 32.
E. Set QoS mode to ToS and tag value to 32.
Answer: C
Q132. When an incoming PSTN call arrives at an MGCP gateway, how does the called number get normalized to an internal directory number in Cisco Unified Communications Manager?
A. Normalization is done by configuring the significant digits for inbound calls on the MGCP gateway.
B. Normalization is done using route patterns.
C. Normalization is done using the gateway incoming called party prefixes based on number type.
D. Normalization is done using the gateway incoming calling party prefixes based on number type.
E. Normalization is achieved by local route group that is assigned to the MGCP gateway.
Answer: A
Q133. Which device is used to connect to the H.323 gatekeeper?
A. H.323 gateway
B. SIP trunk
C. H.323 trunk
D. MGCP gateway
Answer: C
Q134. Which three items must you configure to enable SAF Call Control Discovery? (Choose three.)
A. the SIP or H.323 trunk
B. hosted DN groups
C. hosted DN patterns
D. route patterns
E. a calling search space
F. translation patterns
Answer: A,B,C
Q135. Which two options must be selected in the SIP Trunk Security Profile configuration between Cisco Unified Communications Manager and Expressway? (Choose two)
A. Enable application-level authorization
B. Accept presence subscription
C. Accept out-of-dialog refer
D. Accept unsolicited notification
E. Accept replaces header
F. Transmit security status
G. Allow charging header
Answer: D,E
Q136. What component acts as a user agent for both ends of a SIP call while Cisco Unified SIP SRST is providing failover during a WAN outage?
A. B2BUA
B. SIP server
C. SIP proxy
D. SIP SRST router
E. SIP registrar
Answer: A
Q137. Which two options for a Device Mobility-enabled IP phone are true? (Choose two.)
A. The phone configuration is not modified.
B. The roaming-sensitive parameters of the current (that is, the roaming) device pool are applied.
C. The user-specific settings determine which location-specific settings are downloaded from the Cisco Unified Communications Manager device pool.
D. If the DMGs are the same, the Device Mobility-related settings are also applied.
Answer: B,D
Q138. Refer to the exhibit.
Which configuration change is needed to enable NANP international dialing during MGCP fallback?
A. Change the dial peer to dial-peer voice 901 voip.
B. Change the dial peer to dial-peer voice 9011 pots.
C. Add the command prefix 011 to the dial peer.
D. Add the command prefix 9011 to the dial peer.
Answer: C
Q139. When you use the Query wizard to configure the trace and log central feature to collect install logs, if you have servers in a cluster in a different time zone, which time is used?
A. TLC adjusts the time change appropriately.
B. TLC uses its local time for all systems.
C. TLC queries for the time zone as part of configuration.
D. TLC produces an error and must be run remotely.
Answer: A
Q140. A Cisco Unified Communications Manager cluster is installed in headquarters only.
How can international calls be blocked while national calls are allowed for branch office Cisco IP Phones during a WAN failure?
A. Configure CSS and partitions in Cisco Unified Communications Manager and apply the CSS and partitions to the SRST ISR.
B. Configure CSS and partitions in the SRST ISR.
C. Configure COR in the SRST ISR.
D. Configure voice translations in the SRST ISR.
Answer: C