Pass4sure offers free demo for 300 075 pdf exam. "CIPTV2 Implementing Cisco IP Telephony and Video, Part 2", also known as 300 075 ciptv2 exam, is a Cisco Certification. This set of posts, Passing the Cisco 300 075 pdf exam, will help you answer those questions. The 300 075 pdf Questions & Answers covers all the knowledge points of the real exam. 100% real Cisco 300 075 ciptv2 exams and revised by experts!
P.S. High value 300-075 training materials are available on Google Drive, GET MORE: https://drive.google.com/open?id=1bVtYHQM9JRfrQGNFo3XwqAc50bhY6eCv
New Cisco 300-075 Exam Dumps Collection (Question 2 - Question 11)
Question No: 2
Which gateway does the Cisco Unified Communications Manager control all call activity?
A. SIP
B. MGCP
C. H.323
D. Media
Answer: B
Question No: 3
On which Cisco Unified Communications Manager configuration parameter does the CODEC that a Cisco IP Phone uses for a call depend?
A. enterprise parameters
B. media resources
C. physical location
D. region
E. location
Answer: D
Question No: 4
Which functionality does ILS use to link all hub clusters in an ILS network?
A. Fullmesh
B. Automesh
C. ILS updates
D. multicast
Answer: B
Question No: 5
Refer to the exhibit.
Which trunks would be most suitable for Connection Y?
A. an H.225 trunk (gatekeeper-controlled)
B. intercluster trunk (gatekeeper-controlled)
C. a SIP trunk on the U.S. cluster and an intercluster trunk on the remote cluster
D. intercluster trunk (nongatekeeper-controlled)
E. No extra connections are required. As long as IP connectivity exists, you need only configure a route pattern for each site. The Cisco Unified Communications Manager will automatically forward the calls over the WAN if the destination directory number is not registered locally.
Answer: D
Question No: 6
Refer to the exhibit.
The remote site needs to run multicast MOH from flash. Which statement about the MOH server configuration in Cisco Unified Communications Manager is true?
A. The MOH server must be enabled for G.729 in the Cisco IP Voice Media Streaming Application service parameters.
B. Multicast MOH can use only G.711. So you must configure the command codec G711ulaw under the call-manager-fallback configuration at the remote site router.
C. The MOH for the remote site is a standalone configuration. No extra configuration is required on the Cisco Unified Communications Manager MOH server.
D. Configure a separate region for the MOH server. The codec between the MOH region and all other regions should be specified as G.711. Apply the MOH region through a device pool at the MOH server configuration page.
E. Configure the location setting for the MOH server to 80 Kbps. This configuration forces the MOH server to use G.711 for the remote site.
Answer: D
Question No: 7
Which device is needed to integrate H.320 into the Cisco video solution? (SourcE. Introducing IP Video Telephony)
A. video gateway
B. MGCP gateway
C. H.323 gatekeeper
D. MCU
Answer: C
Explanation: Incorrect: ABD
As with H.323 MCUs, H.320 gateways are provisioned in Cisco Unified CallManager as
H.323 gateways, and then route patterns are configured to extend calls to these devices. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/4x/42video.html#wp1046523
Question No: 8
Refer to the exhibit.
Assume that NANP is being used and 9 is used for PSTN access code Long distance national calls are preceded with 1.
How should the HQ Cisco Unified Communications Manager be configured for calls to 3XXX to be sent to the gatekeeper at 1 0 1 6 1 with PSTN backups?
A. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups The first route group contains the H 225 trunk The second route group contains the MGCP gateway with prefix digits 1 408555 for the outgoing called number.
B. Configure a route pattern for 1#3XXX Assign this route pattern to a route list that points to a route group that lists the H 225 trunk as first choice and the MGCP gateway as a second choice.
C. Configure a route pattern for 4085543XXX. Assign this route pattern to a route list that points to two route groups. The first route group contains the H 226 trunk The second route group contains MGCP gateway.
D. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups The first route group contains the H 225 trunk The second route group contains MGCP gateway with prefix digits 91 408554 for the called number.
Answer: A
Explanation:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/b03rtgrp.html
#wpxref46617
Question No: 9
When an external call is placed from Ajax, they would like the ANI that is sent to the PSTN to be the main number, not the extension. For domestic calls, they would like 10 digits sent; for international calls, they would like to send the country code 1 and the 10 digits. How can this be accomplished?
A. Add a translation pattern to the dial peers in the gateway that adds the appropriate digits to the outgoing ANI.
B. In the external call route patterns, set the external phone number mask to the main number. Use 10 digits in the domestic route pattern and 1 followed by the main number digits in the international route patterns.
C. Use a calling party transform mask for each route group in the corresponding route list configuration. Set the explicit 10-digit main number for domestic calls and 1 followed by the main number for the international route patterns.
D. In the directory number configurations, set the prefix digits field to the country code and the 10 digits of the main number. This will be truncated to the 10-digit number for domestic calls and sent out in its entirety for international calls.
Answer: C
Explanation: Incorrect: ABD
calling party transformation mask value is Valid entries for the NANP include the digits 0 through 9; the wildcard characters X, asterisk (*), and octothorpe (#); and the international escape character +.
Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b03trpat.ht ml
Question No: 10
What is the purpose of the local route group?
A. minimize PSTN costs
B. help in the selection of the PSTN egress gateway
C. eliminate the need for a route list
D. allow manipulation of digits at the cost point to egress
Answer: B
Question No: 11
Which method can be used to address variable-length dial plans?
A. Overlap sending and receiving.
B. Add a prefix for all calls that are longer than 10-digits long
C. Use nested translation patterns to eliminate inter-digit timeout
D. Use the @macro on the route pattern
E. Use MGCP gateways, which support variable-length dial plans
Answer: A
Explanation: Incorrect: BCDE
If the dial plan contains overlapping patterns, Cisco Unified Communications Manager does not route the call until the interdigit timer expires (even if it is possible to dial a sequence of digits to choose a current match). Check this check box to interrupt interdigit timing when Cisco Unified Communications Manager must route a call immediately.
By default, the Urgent Priority check box displays as checked. Unless your dial plan contains overlapping patterns or variable length patterns that contain!, Cisco recommends that you do not uncheck the check box.
Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmfeat/fsintrcm.htm l
100% Renovate Cisco 300-075 Questions & Answers shared by Allfreedumps, Get HERE: https://www.allfreedumps.com/300-075-dumps.html (New 420 Q&As)