for Cisco certification, Real Success Guaranteed with Updated . 100% PASS 300-160 DCID Designing Cisco Data Center Infrastructure exam Today!
Cisco 300-160 Free Dumps Questions Online, Read and Test Now.
NEW QUESTION 1
Which two platforms support the FCoE protocol? (Choose two)
- A. Cisco MDS 9148S Series
- B. Cisco MDS 9222i series
- C. Cisco Nexus 2332TQ Series
- D. Cisco nexus 7010 series
- E. Cisco Nexus 2248TP series
Answer: CD
NEW QUESTION 2
Why should you implement an adapter placement polices to assign vnics or vHBas to vCons?
- A. To function service profile templates, require a specific vHBA placement for boot from SAN
- B. Force the vHBas and the vNICs to appear in specific order in the operating system
- C. To function vHBA updating templates require a specific VHBA placement for BOOT from SAN
- D. To function, the FCoe storage port require a specific vHBA placement for boot from SAN
Answer: A
NEW QUESTION 3
Which two terms relate to the capability of a physical NIC to present virtual NICs to the operating system or hypervisor? (Choose two.)
- A. VM-FEX
- B. NPIV
- C. Adapter-FEX
- D. NIV
- E. host vPC
- F. NIC teaming
Answer: CD
NEW QUESTION 4
How is oversubscription between disk arrays and hosts calculated when you use only line-rate capable line cards?
- A. by dividing the total bandwidth of the disk array ports by the total bandwidth of the Inter-Switch Links
- B. dividing the total bandwidth of the host ports by the total bandwidth of the disk array ports
- C. by dividing the total bandwidth of the host ports by the total bandwidth of the Inter-Switch Links
- D. by dividing the total bandwidth of the disk array ports by the total bandwidth of the host ports
Answer: B
NEW QUESTION 5
You are deploying a VM-FEX You have a VM that must be able to attach to a dynamic vNIC. Which action do you take on the VIC adapter?
- A. Dynamically configure the VIC adapter to connect to a vNIC.
- B. Configure a single vNIC only.
- C. Configure two static vNICs.
- D. Add the VIC adapter to a vNIC pool.
Answer: C
NEW QUESTION 6
Which SAN port type should you use on an NPIV core switch that connects to an NPV edge switch?
- A. FL
- B. F
- C. N
- D. TE
- E. E
Answer: B
NEW QUESTION 7
Which technology does Cisco recommend tor connecting a main data center to a remote data center?
- A. LISP
- B. OTV
- C. FabricPath
- D. vPC
Answer: B
NEW QUESTION 8
You deploy new server infrastructure by using a Cisco UCS platform. Winch two design options can you use to increase the redundancy of the new compute solution' (Choose two.)
- A. a 10-Gb uplink port
- B. a pin vNic in the server profile to a specific Fabric Interconnect node that has failover disabled
- C. adding multiple ports to uplink port channels
- D. static pinning at the server ports
- E. more than one server port to connect the Cisco UCS B-Series blade IOM
Answer: BC
NEW QUESTION 9
Which two options are supported on Cisco UCS Fabric Interconnects that use native Fibre Channel connectivity? (Choose two)
- A. iSCSI
- B. NFS
- C. DAS
- D. SAN
- E. iFCP
Answer: CD
NEW QUESTION 10
You plan to configure OTV multicast. What must you enable to use SSM?
- A. IGMFv3
- B. PIM-DM
- C. IGMPv2
- D. PIM-SM
- E. PIM Anycast-RP
Answer: D
NEW QUESTION 11
What is the default CoS value for FCoE packets on a storage VDC?
- A. 1
- B. 2
- C. 3
- D. 5
- E. 7
Answer: C
NEW QUESTION 12
Which two statements accurately describe lossless iSCSl? (Choose two.)
- A. A lossless iSCSI provides additional flow Control by using pause frames at the Ethernet layer along with TCP flow control.
- B. Bandwidth is shared with all of the traffic on the wire.
- C. A lossless iSCSl works only on DCBX-enabled switches.
- D. A lossless iSCSI can be combined with native Fibre Channel fabrics to provide redundancy.
- E. A lossless iSCSl works on all Ethernet switches.
Answer: BD
NEW QUESTION 13
Which statement accurately describe the allocation of IP pool for out of Band management of cisco?
- A. A maximum of eight OOB IP address can be configure to access the CIMC on the server
- B. The management IP address used to access CIMC on a server can be out of band address the inter connect via the fabric uplink port
- C. A maximum of Sixteen OOB IP address can be configure to access the CIMC on the server
- D. The management IP address used to access CIMC on a server can be out of band address the inter connect via the Management port
Answer: B
NEW QUESTION 14
You are designing a fabric interconnect solution operating in END host MODE and connected to the upstream Cisco nexus 7000 series Switches for LAN and SAN traffic.
Which statement about the setup is true?
- A. All PLOGLS from the nodes that are connected to the end host fabric interconnect switch must be translated to FDISCs
- B. All PLOGLS from the nodes that are connected to the end host fabric interconnect switch must be translated to Flogls
- C. All PLOGLS from the nodes that are connected to the end host fabric interconnect switch must be translated toPLOGls
- D. FDISCs
Answer: B
NEW QUESTION 15
Which two STP port types are available in Cisco NX-OS? (Choose two.)
- A. normal
- B. edge
- C. blocked
- D. root
- E. point-to-point
Answer: AB
Explanation: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/layer2/configuration/guide/b_Cisco_Nexus_
You can configure a spanning tree port as an edge port, a network port, or a normal port. A port can be in only one of these states at a given time. The default spanning tree port type is normal. Edge ports, which are connected to Layer 2 hosts, can be either an access port or a trunk port
NEW QUESTION 16
Which statement accurately describes VSAN-based QoS when the same flow is present in two class maps that are associated to a policy map?
- A. The highest QoS value is used.
- B. The lowest QoS value is used.
- C. The QoS value of the class map that is attached first takes effect.
- D. The QoS value of the class map that is attached last takes effect.
Answer: C
Explanation: http://www.cisco.com/en/US/products/ps5989/products_configuration_guide_chapter09186a0080663141.html
NEW QUESTION 17
if you are connecting a Cisco UCS Fabric Interconnect in it's default mode to a SAN, what is the operating mode?
- A. trunk
- B. NPIV mode
- C. switching
- D. NPV mode
Answer: D
NEW QUESTION 18
Which statement describes an interconnect link between an FCoE NPV switch and an FCF switch?
- A. The interconnect must use port type NP on the FCoE switch.
- B. The interconnect must use port type VNP on the FCoE switch.
- C. The interconnect must use port type E on the FCoE switch
- D. The FCoE switch must create the tunnel interface and bind to the physical interconnect.
Answer: B
NEW QUESTION 19
The classical access layer has its limitations due to a high value in which of the following items?
- A. oversubscription
- B. jitter
- C. cost
- D. 10 Gigabit Ethernet links
Answer: A
100% Valid and Newest Version 300-160 Questions & Answers shared by 2passeasy, Get Full Dumps HERE: https://www.2passeasy.com/dumps/300-160/ (New 132 Q&As)