It is impossible to pass Cisco 300-160 exam without any help in the short term. Come to us soon and find the most advanced, correct and guaranteed . You will get a surprising result by our .

Free 300-160 Demo Online For Microsoft Certifitcation:

NEW QUESTION 1
Which statement accurately describes Ethernet switching mode on a Cisco UCS Fabric Interconnect?

  • A. VTP is enabled on the Fabric Interconnect
  • B. PVST+ runs on the Fabric Interconnect.
  • C. The uplink ports are placed in a Rapid PVST+ edge trunk state
  • D. The vNiCs can be configured for failover

Answer: B

NEW QUESTION 2
You must configure resiliency for Fibre Channel uplink ports on Cisco UCS Fabric Interconnects. Which feature should you configure?

  • A. an appliance port
  • B. vPC
  • C. a port channel
  • D. a unified storage port

Answer: C

NEW QUESTION 3
Spanning Tree Protocol runs at which functional layer of the data center?

  • A. core layer
  • B. access layer
  • C. application layer
  • D. network layer

Answer: B

NEW QUESTION 4
Which data center virtualization option allows each partition to specify a different set of admisntrators and maintains its all own unique configuration and set of running software process?

  • A. VRF
  • B. VDC
  • C. 100v VEM
  • D. vPC

Answer: B

NEW QUESTION 5
What is the most common design requirement when creating a data center solution?

  • A. high availability with disaster recovery
  • B. multicore CPU servers
  • C. traffic inspection for inbound traffic
  • D. virtualization of network resources

Answer: A

NEW QUESTION 6
The classical aggregation layer design does not provide isolation on the control plane and on the data plane. What is the solution to this problem?

  • A. STP
  • B. VDC
  • C. Cisco ISO ISSU
  • D. HSRP

Answer: B

NEW QUESTION 7
Which two options can be performed only from the Admin VDCs on the Cisco Nexus 7000 Series platform? (Choose two)

  • A. Create SPAN ports on other VDCs
  • B. Create, modify, and delete VDCs
  • C. Configure Cisco Fabric Path in other VDCs
  • D. Access the CLI of other VDCs
  • E. Process-data plane traffic

Answer: BD

NEW QUESTION 8
Which statement accurately describes the configuration requirements for disjoint Layer 2 networks on Cisco UCS?

  • A. The Cisco UCS fabric Interconnect must be in switch mode.
  • B. The VLAN IDs must overlap in both Layer 2 domains.
  • C. All of the uplinks most be in one port channel to keep all of the ports active.
  • D. The Cisco UCS Fabric Interconnect must be in end-host motto.

Answer: D

NEW QUESTION 9
Which type of device can be deployed to add multi-homing capability to an OTV implementation?

  • A. vPC
  • B. IS-IS
  • C. Edge
  • D. Layer 2 gateway

Answer: C

NEW QUESTION 10
Which item represents a method of increasing storage utilization efficiency?

  • A. thick provisioning
  • B. thin provisioning
  • C. transparent provisioning
  • D. weighted provisioning

Answer: B

NEW QUESTION 11
Which two statements accurately describe a Cisco UCS Fabric Interconnect cluster? (Choose two )

  • A. Only the active Fabric Interconnect forwards data traffic
  • B. The Fabric Interconnect cluster uses a Cisco UCS B-Senes Blade Server chassis to forward data when the L1-L2 links are down
  • C. The Fabric Interconnect cluster uses a virtual IP address for management connections
  • D. The Fabric Interconnect uses L1-L2 links to forward data when the primary Fabric Interconnect uplinks are down.
  • E. primary Fabric Inter connect node conies up after a failure, the node compares the Cisco UCS systemdatabase version to Fabric Interconnect

Answer: CE

NEW QUESTION 12
When deploying VMWare ESXi on Cisco UCS B Series Servers, what should the iSCSI boot-from-SAN use in the service profile to provide redundancy?

  • A. two VMKs to connect to the storage
  • B. two vHBAs to connect to the storage
  • C. two vnmics to connect to the storage
  • D. two vNICs to connect to the storage

Answer: B

NEW QUESTION 13
Which statement accurately describes the allocation of IP pools for out-of-band management of a Cisco UCS Series environment*?

  • A. The management IP addresses used to access CIMC on a server can be out-of-band addresses, through which traffic traverses the Fabric Interconnect via the management port
  • B. The management IP addresses used to access CIMC on a server can be out-of-band addresses through which traffic traverses the Fabric Interconnect via the fabric uplink port
  • C. A maximum of sixteen OOB IP addresses can be configured to access the CIMC on a server
  • D. A maximum of eight OOB IP addresses can be configured to access the CIMC on a server

Answer: B

Explanation: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Ma

NEW QUESTION 14
Which two options are advantages of the core-edge SAN topology as compared to the collapsed-core SAM topology? (Choose two.)

  • A. predictable performance
  • B. minimized ISL usage
  • C. easier to analyze and tune performance
  • D. single management interface
  • E. higher scalability

Answer: AE

Explanation: https://supportforums.cisco.com/document/125836/core-edge-and-collapse-core-san-topologies#Core-Edge_Top

NEW QUESTION 15
Which type of switch interfaces are supported in classic NPV mode for a Fibre Channel network?

  • A. the vFC internal port and the physical external port
  • B. the physical internal port and the physical external port
  • C. the vFC internal port and the vFC external port
  • D. the vFC external port and the physical internal port

Answer: D

NEW QUESTION 16
You plan to configure LISP between two data centers. Which two LISP components most be configured? (Choose two.)

  • A. VTEP
  • B. the site identifier
  • C. a map resolver
  • D. a map server
  • E. VNI

Answer: CD

Explanation: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_lisp/configuration/xe-3s/irl-xe-3s-book/irl-cfg-lisp.ht

NEW QUESTION 17
Service graphs are used to define which option on the Cisco ACI platform?

  • A. a function that a contract must use to get to another contract
  • B. a policy that an EPG must use to get to another EPG
  • C. the contract between two EPGs
  • D. the Cisco APIC definitions of the contracts in REST API

Answer: B

NEW QUESTION 18
For which two items can you change the default settings by using a Fibre Channel adapter policy? (Choose two.)

  • A. WWNN pool
  • B. queue
  • C. MTU
  • D. SAN pin group
  • E. RSS hash

Answer: BE

NEW QUESTION 19
You are configuring a switch as a LISP xTR. You plan to use the LISP xTR when deploying redundant map servers. Which action do you take?

  • A. Register the LISP xTR to the anycast IP address of the map resolver.
  • B. Register the LISP xTR to the IP address of each map server
  • C. Configure the map notify group command by using the anycast IP address of the map resolver
  • D. Configure the map-notify group command by using the IP address of each map server

Answer: C

Recommend!! Get the Full 300-160 dumps in VCE and PDF From Surepassexam, Welcome to Download: https://www.surepassexam.com/300-160-exam-dumps.html (New 132 Q&As Version)