Master the content and be ready for exam day success quickly with this . We guarantee it!We make it a reality and give you real in our Cisco 300-180 braindumps. Latest 100% VALID at below page. You can use our Cisco 300-180 braindumps and pass your exam.
Online Cisco 300-180 free dumps demo Below:
NEW QUESTION 1
A customer is deploying multihop FCoE in its network. Which guideline must the customer follow with respect to VE ports to make this deployment possible?
- A. Auto mode on the vFC interface is supported.
- B. VE-port trunking is supported over FCoE-enabled VLANs.
- C. VE-port interface binding to MAC addresses is supported.
- D. A VE port is disabled for trunk mode by default.
Answer: B
NEW QUESTION 2
Refer to the exhibit.
A zone merge failure occurs with the above error log. What is the problem?
- A. Two switches have the same zone set name but different zone members.
- B. Two switches have different zone names and different members.
- C. Two switches have the same zone set name and the same members.
- D. Two switches have different zone names.
Answer: A
NEW QUESTION 3
In Cisco UCS, which logs are used to troubleshoot hardware failure?
- A. system event log
- B. audit log
- C. gateway logs
- D. system log
Answer: A
NEW QUESTION 4
You have upgraded your Cisco Nexus 7009 Switches and converted the default VDC to an admin VDC. You notice that all of the ACLs are still present on the admin VDC after the conversion. What should you do?
- A. enable configuration synchronization between the admin VDC and the production VDCs
- B. delete the ACLs
- C. delete all ACLs except those related to CoPP
- D. delete all ACLs except those bound to resource templates
- E. use the system admin-vdc acl command to properly migrate ACLs
Answer: B
NEW QUESTION 5
Which two features are required to configure a blade to boot successfully from Fibre Channel? (Choose two.)
- A. LUN masking
- B. WWPN device alias
- C. boot from SAN policy
- D. SAN connectivity policy
- E. port assignment
Answer: AC
NEW QUESTION 6
You have a Cisco APIC environment. An administrator configures the administrator roles for managing a service configuration You discover that some tenants can import device clusters but cannot use the device clusters What should you do to ensure that the tenants can use the device clusters?
- A. Change the ready-only access permission for the tenants to read-write.
- B. grant the tenants the nw-svc-device privilege.
- C. Grant the tenant the nw-svc-devshared privilege.
- D. Grant the tenant the nw-svc-policy privilege.
Answer: D
NEW QUESTION 7
Which two ports must be open on a VMware vCenter server to allow communications to a Cisco Nexus 1000V Series Switch? (Choose two)
- A. 80
- B. 443
- C. 21
- D. 2010
- E. 20
Answer: AB
NEW QUESTION 8
Refer to the exhibit.
You have a server that fails to boot *which option is a possible cause of the issue?
- A. an incorrect boot policy
- B. incorrect zoning
- C. an incorrect FC/FCoE target port in the SAN
- D. incorrect LUN masking on the Storage array
Answer: D
NEW QUESTION 9
Refer to the exhibit.
What command should you execute next in resolving a lock failure?
- A. ntp execute
- B. ntp commit
- C. ntp lock
- D. ntp help
- E. ntp detail
Answer: B
NEW QUESTION 10
Which configuration is needed to suppress duplicate IP addresses when HSRP localization is enabled?
- A. Configure matching passwords in each data center.
- B. Configure no ip arp gratuitous hsrp duplicate under the VLAN.
- C. Remove the passwords in each data center.
- D. Configure mismatching HSRP versions between data centers.
- E. Change one data center to run VRRP rather than HSRP.
Answer: B
NEW QUESTION 11
Refer to the exhibit.
A customer is having a problem with NPV. Which of these is the cause of the problem?
- A. No server was requested or received by the FLOGI database.
- B. One external link must be up for server interface to be up.
- C. Multiple external links must be up for the server to come up.
- D. Internal links are down and must be up for the server interface to be up.
Answer: B
NEW QUESTION 12
Within Cisco UCS Manager you create a user named ccnpdc and an organization named ccnpdc. The administrator to whom the ccnpdc credentials are assigned fails to access the ccnpdc organization. What must you do to provide the ccnpdc user access to the ccnpdc organization?
- A. assign a locale
- B. assign a role
- C. set the password expire time
- D. enable the user account
Answer: A
NEW QUESTION 13
Refer to the exhibit.
DC-SWITCH 14 is a Cisco Nexus switch Port channel 1106 connects to a Cisco Nexus switch named DC-SWITCH10. Which cause of the I flag is likely?
- A. Port channel 1106 is administratively down.
- B. STP is blocking port channel 1106
- C. LACP is misconfigured on DC-SWITCH14
- D. LACP is misconfigured on DC-SWITCH10.
Answer: C
NEW QUESTION 14
A customer calls you to report that it receives an error when entering the pinning max-links 4 command in FEX configuration mode on its Cisco Nexus 5596T Switch. Which of these is a likely cause for this condition?
- A. The FEX fabric interface is down.
- B. The transceiver is incorrect.
- C. A fabric interface is in a port channel.
- D. The fabric interface switchport mode is set to Access.
- E. Only two fabric interfaces are connected.
Answer: C
NEW QUESTION 15
When configuring LLDP on Cisco Nexus 5548 Switch, what is the purpose of LLDP hold time global configuration command?
- A. LLDP holdtime option is to set the length of time in milliseconds that a device should save LLDP information received before discarding it.
- B. LLDP holdtime option is to set the length of time in seconds that a device should save LLDP information received before discarding it.
- C. LLDP holdtime option is to set the length of time in milliseconds to wait before performing LLDP initialization on any interface.
- D. LLDP holdtime option is to set the length of time in seconds to wait before performing LLDP initialization on any interface.
Answer: B
NEW QUESTION 16
An engineer enters the show svs neighbors command as shown below. Which statement describes the output of the command?
- A. The VSM cannot connect to the VEM.
- B. The vCenter server cannot connect to the VSM.
- C. The VSM is connected to the VEM by using an Layer 2 network.
- D. The VSM is connected to the VEM by using an Layer 3 network.
Answer: B
NEW QUESTION 17
Refer to the exhibit.
The firmware fails while using AutoInstall. What cloud cause this issue?
- A. A maximum of two active partitions is permitted when using AutoInstall
- B. The bootflash partition exceeded 70 percent of the capacity of the flash drive.
- C. The license for the Advance Services package must be installed.
- D. The workspace partition must be at least 10 percent of the flash drive.
Answer: B
NEW QUESTION 18
You have a node in a decommissioned state. What could cause the issue?
- A. The node was disabled by the user.
- B. The node is unreachable.
- C. The node is in a transient state.
- D. The node cannot join the fabric
Answer: A
NEW QUESTION 19
Refer to the exhibit. You fail to configure a boot from iSCSI service profile. Which action do you take to troubleshoot the issue?
- A. Attempt to ping the IP address of the iSCSI target.
- B. Check the LUN masking configuration.
- C. In the CLI of Cisco UCS Manager, verify that the blade is attached to the LUN.
- D. Check the native VLAN configuration on the overlay vNIC.
Answer: D
NEW QUESTION 20
Refer to the exhibit.
No OSPF neighborship exists between N5K-1 and N7K-1. Which configuration resolves this issue?
- A. (config)# router ospf 1(config-router)# network 192.168.103.152 255.255.255.252 area 0
- B. (config)# ip router ospf 1 area 0
- C. (config)# router ospf 1(config-router)# network 192.168.103.152 0.0.0.3 area 0
- D. (config-rf)# ip router ospf 1 area 0
Answer: A
Thanks for reading the newest 300-180 exam dumps! We recommend you to try the PREMIUM Certleader 300-180 dumps in VCE and PDF here: https://www.certleader.com/300-180-dumps.html (236 Q&As Dumps)