Exam Code: 70-680 (Practice Exam Latest Test Questions VCE PDF)
Exam Name: TS:Windows 7,Configuring
Certification Provider: Microsoft
Free Today! Guaranteed Training- Pass 70-680 Exam.
2021 Mar 70-680 exam engine
Q151. DRAG DROP - (Topic 4)
A company has client computers that run windows vista.
You need to install Windows 7 on a client computer in a dual-boot configuration with the existing Windows Vista installation, without reducing the size of the partition that contains Windows Vista.
Which actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
Answer:
Q152. - (Topic 5)
You are performing a native VHD boot from Windows Vista to Windows 7 Professional. Windows 7 Professional is installed on F: \Windows7Pro.vhd.
You run the bcdedit /copy {current} /d "Windows 7 VHD" command. The boot configuration data is enumerated as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that the following requirements are met:
. Both operating systems are bootable after the Power On Self-Test (POST).
. Windows 7 VHD is selected as the default boot entry.
Which three commands should you run? (Each correct answer presents part of the solution. Choose three.)
A. Bcdedit /default {ded5a252-7077-11e0-8ac8-a2d217dce703}
B. Bcdedit /set {ded5a24e-7077-11e0-8ac8-a2d217dce703} osdevice vhd=[f:]\Windows7Pro.vhd
C. Bcdboot C:\windows /s E:
D. Bcdedit /set {ded5a24e-7077-11e0-8ac8-a2d217dce703} device vhd=[f:]\Windows7Pro.vhd
E. Bcdedit /set {ded5a252-7077-11e0-8ac8-a2d217dce703} device vhd=[f:]\Windows7Pro.vhd
F. Bcdedit /default {current}
G. Bcdedit /set {ded5a252-7077-11e0-8ac8-a2d217dce703} osdevice vhd=[f:]\Windows7Pro.vhd
Answer: A,E,G
Q153. - (Topic 4)
A company has client computers that run Windows 7 Enterprise.
You need to configure new NTFS permissions to ensure that only the specified user has access to write to a given folder.
What should you use to achieve this goal? (Each correct answer presents a complete solution. Choose two.)
A. the icacls command
B. the User Account Control Settings Control Panel window
C. share permissions
D. Local Users and Groups
E. the folder Properties window
F. the Services management console
G. the netsh command
H. Device Manager
I. the Group Policy management console
Answer: A,E
Q154. - (Topic 1)
You have a standalone computer that runs Windows 7. Multiple users share the computer.
You need to ensure that you can read the content of all encrypted files on the computer.
What should you do?
A. Run the Certificates Enrollment wizard and then run Certutil.exe -importpfx.
B. Run the Certificates Enrollment wizard and then run Certutil.exe -installcert.
C. Run Cipher.exe /r and then add a data recovery agent from the local security policy.
D. Run Cipher.exe /rekey and then import a security template from the local security policy.
Answer: C
Explanation:
Cipher Displays or alters the encryption of folders and files on NTFS volumes. Used without parameters, cipher displays the encryption state of the current folder and any files it contains. Administrators can use Cipher.exe to encrypt and decrypt data on drives that use the NTFS file system and to view the encryption status of files and folders from a command prompt. The updated version adds another security option. This new option is the ability to overwrite data that you have deleted so that it cannot be recovered and accessed.When you delete files or folders, the data is not initially removed from the hard disk. Instead, the space on the disk that was occupied by the deleted data is "deallocated." After it is deallocated, the space is available for use when new data is written to the disk. Until the space is overwritten, it is possible to recover the deleted data by using a low-level disk editor or data-recovery software.
If you create files in plain text and then encrypt them, Encrypting File System (EFS) makes a backup copy of the file so that, if an error occurs during the encryption process, the data is not lost. After the encryption is complete, the backup copy is deleted. As with other deleted files, the data is not completely removed until it has been overwritten. The new version of the Cipher utility is designed to prevent unauthorized recovery of such data.
/K Creates a new certificate and key for use with EFS. If this option is chosen, all the other options will be ignored. By default, /k creates a certificate and key that conform to current group plicy. If ECC is specified, a self-signed certificate will be created with the supplied key size. /R Generates an EFS recovery key and certificate, then writes them to a .PFX file (containing certificate and private key) and a .CER file (containing only the certificate). An administrator may add the contents of the .CER to the EFS recovery policy to create the recovery for users, and import the .PFX to recover individual files. If SMARTCARD is specified, then writes the recovery key and certificate to a smart card. A .CER file is generated (containing only the certificate). No .PFX file is genereated. By default, /R creates an 2048-bit RSA recovery key and certificate. If EECC is specified, it must be followed by a key size of 356, 384, or 521.
Q155. HOTSPOT - (Topic 4)
A company is upgrading its client computers from windows XP to windows 7. You add an application to the Windows 7 base image.
Large fonts are interfering with the appearance of the application.
You need to ensure that the application is displayed correctly on client computers that run Windows 7.
Which option should you select? (To answer, select the appropriate check box in the dialog box.)
Answer:
Refresh 70-680 exam guide:
Q156. - (Topic 4)
You have a netbook computer that runs Windows 7. The computer has a single 30-GB partition that has 10 GB of free space. You need to create a system image of the computer by using Windows Backup.
You must achieve this goal by using the minimum amount of time. What should you do first?
A. Attach an external hard disk.
B. Attach an external DVD burner.
C. Convert the local hard disk to a GPT disk.
D. Create and attach a virtual hard drive (VHD).
Answer: A
Explanation:
Scheduling Backups with the Backup And Restore Console Windows 7 Backup uses shadow copies to take a snapshot of your files, allowing the backup to completely back up files even if they are open. Backups are configured and scheduled by using the Backup And Restore console under System And Security in Control Panel. You can select the following types of backup destination: An external hard driveExternal hard drives are more expensive to purchase than internal hard drives, although you need to balance this against the cost of fitting the internal drive. They can be removed and stored in a secure location. However, they are typically slower than internal hard drives and tend to be less reliable, mainly because they are by default formatted using FAT rather than NTFS. You cannot use an external hard drive for a System Image backup unless you convert its filing system to NTFS. Because it is easily removable, it is more likely that an external hard drive will be missing when a scheduled backup is required.
Q157. - (Topic 1)
Which of the following utilities can you use to transfer user encryption certificates from a computer running Windows XP Professional to Windows 7 Professional? Choose two.
A. File Settings and Transfer Wizard
B. USMT
C. Windows Easy Transfer
D. Robocopy.exe
Answer: B,C
Q158. - (Topic 2)
You have a computer that runs Windows 7. The computer contains one hard disk. The hard disk is configured as shown in the following table.
You install a new 250-GB hard disk in the computer.
You need to ensure that all the files on the computer are available if a single disk fails.
What should you do?
A. Create a mount point on C and D and then create a striped volume.
B. Create a mount point on C and D and then create two striped volumes.
C. Convert both disks to dynamic disks and then create a mirrored volume.
D. Convert both disks to dynamic disks and then create two mirrored volumes.
Answer: D
Explanation:
Creating a Mirrored Volume (RAID-1)A mirrored or RAID-1 volume provides availability and fault tolerance but does not improve performance. It uses two disks (or two portions on separate disks) that are the same size. Any changes made to the first disk of a mirror set are also made to its mirror disk. If the first disk fails, the mirror is broken and the second disk is used until the first is repaired or replaced. The mirror is then re-created, and the information on the working disk is mirrored on the repaired disk. The disadvantage of RAID-1 is that you need (for example) two 200-GB disks to hold 200 GB of data. The advantage is that you can mirror a system disk containing your operating system.You create a mirrored volume using a very similar procedure to the one that creates a striped volume, except that you right-click the first disk of your mirror and click New Mirrored Volume to start the appropriate wizard. You then select the second disk. The second disk needs to have a portion of unallocated space that is at least as large as the disk you want to mirror. The drive letter for a mirrored volume is the same as the drive letter of the first disk. You can also use the Diskpart tool to create a mirrored volume. At the DISKPART> prompt you first use the select disk command to select the first disk. You then enter a command with the syntax add disk=<n>to specify the mirror disk.
Q159. - (Topic 2)
You work as the Desktop support technician at Abc.com. The Abc.com network consists of a single Active Directory domain named Abc.com.
The Abc.com management has instructed you to install Microsoft Windows 7 on all the client computers at Abc.com. You need to create a Windows 7 image that includes the Office 2007
Microsoft Installer Package (MSI) package for the installation.
What should you do?
A. You should consider installing the MSI package by using the update command with the /slipstream switch.
B. You should consider installing the MSI package by using the Msiexec command with the /package /uninstall switches.
C. You should consider installing the MSI package by using the Msiexec command with the /package switch.
D. You should consider installing the MSI package by using the Install command with the /package switch.
Answer: C
Q160. - (Topic 5)
You have a computer that runs a 32-bit version of Windows 7 Home Premium. The computer has a single partition on a single hard disk drive.
You want to test a 64-bit version of Windows 7 Ultimate. You configure the computer for a dual boot with previously installed Windows 7 Home Premium.
You need to configure the computer to support the dual boot.
What should you do?
A. Start Windows 7 Home Premium. Create a Virtual Hard Disk (VHD) file to start Windows 7 Ultimate.
B. Attach Windows 7 Ultimate media as an ISO image into Windows 7 Home Premium.
C. Start Windows 7 Home Premium. Create and mount a new Windows Imaging Format (WIM) file with Windows 7 Ultimate files.
D. Install Virtual PC into Windows 7 Home Premium.
Answer: A
Explanation: The Virtual Hard Disk (VHD) format is a publicly-available image format specification that allows encapsulation of the hard disk into an individual file for use by the operating system as a virtual disk in all the same ways physical hard disks are used. These virtual disks are capable of hosting native file systems (NTFS, FAT, exFAT, and UDFS) while supporting standard disk and file operations. VHD API support allows management of the virtual disks. Virtual disks created with the VHD API can function as boot disks.