Pass4sure offers free demo for microsoft 70 680 exam. "TS:Windows 7,Configuring", also known as exam 70 680 exam, is a Microsoft Certification. This set of posts, Passing the Microsoft 70 680 exam exam, will help you answer those questions. The 70 680 exam Questions & Answers covers all the knowledge points of the real exam. 100% real Microsoft 70 680 pdf exams and revised by experts!
Q1. - (Topic 2)
You have a computer that runs Windows Vista.
You need to identify whether the computer can be upgraded to Windows 7.
Which tool should you use?
A. Windows Anytime Upgrade for Windows 7
B. Windows Anytime Upgrade for Windows Vista
C. Windows 7 Upgrade Advisor
D. Windows Vista Upgrade Advisor
Answer: C
Explanation:
Windows 7 Upgrade Advisor Prior to attempting to perform the upgrade from Windows Vista to Windows 7, you should run the Windows 7 Upgrade Advisor. The Windows 7 Upgrade Advisor is an application that you can download from Microsoft's\ Web site that will inform you if Windows 7 supports a computer running the current hardware and software configuration of Windows Vista. Prior to running the Windows 7 Upgrade Advisor, you should ensure that all hardware that you want to use with Windows 7, such as printers, scanners, and cameras, are connected to the computer. The Upgrade Advisor generates a report that informs you of which applications and devices are known to have problems with Windows 7. NOT Windows Anytime Upgrade A similar compatability report is generated during the upgrade process, but the version created by the Windows 7 Upgrade Advisor is more likely to be up to date.NOT VistaQuestion specifies upgrading to Windows 7 from Windows Vista, not upgrading to Windows Vista.
Q2. - (Topic 2)
Your network consists of a single Active Directory domain named contoso.com.
You have a server named Server1 that runs a custom network application.
Server1 has the following IP addresses:
. 192.168.15.10
. 192.168.15.11
You need to ensure that a client computer resolves server1.contoso.com to only the 192.168.15.11 IP address.
What should you do from the computer?
A. Edit the hosts file
B. Edit the lmhosts file
C. Run Ipconfig.exe /flushdns
D. Run Netsh interface ipv4 reset
Answer: A
Explanation:
Differences Between the HOSTS and LMHOSTS Files in Windows NT In Windows NT, the HOSTS file is for TCP/IP utilities, and the LMHOSTS file is for LAN Manager NET utilities. If you cannot PING another computer (using a friendly name), check the HOSTS file. If you cannot NET VIEW a server using only the TCP/IP protocol, check the LMHOSTS file.
Hosts fileThe Hosts file is a common way to resolve a host name to an IP address through a locally stored text file that contains IP-address-to-host-name mappings. On most UNIX-based computers, this file is /etc/hosts. On Windows-based computers, this file is the Hosts file in the systemroot\System32\Drivers\Etc folder. The following describes the attributes of the Hosts file for Windows: A single entry consists of an IP (IPv4 or IPv6) address and one or more host names. The Hosts file is dynamically loaded into the DNS client resolver cache, which Windows Sockets applications use to resolve a host name to an IP address on both local and remote subnets. When you create entries in the Hosts file and save it, its contents are automatically loaded into the DNS client resolver cache. The Hosts file contains a default entry for the host name localhost. The Hosts file can be edited with any text editor. Each host name is limited to 255 characters. Entries in the Hosts file for Windows–based computers are not case sensitive. The advantage of using a Hosts file is that users can customize it for themselves. Each user can create whatever entries they want, including easy-to-remember nicknames for frequently accessed resources. However, the individual maintenance required for the Hosts file does not scale well to storing large numbers of FQDN mappings or reflecting changes to IP addresses for servers and network resources. The solution for the large-scale storage and maintenance of FQDN mappings is DNS. The solution for the maintenance of FQDN mappings for changing IP addresses is DNS dynamic update.NOT LMHOSTS FileThe LMHOSTS file is a local text file that maps IP addresses to NetBIOS names of remote servers with which you want to communicate over the TCP/IP protocol. Windows recognizes names instead of IP addresses for network requests and a name discovery process is used to correctly route network requests with TCP/IP. Because the name discovery process is generally not routed by an IP router, the LMHOSTS file allows Windows machines to communicate using TCP/IP across a subnet.
-LMHOSTS contains IP address to "NetBIOS over TCP/IP" name translations.
-LMHOSTS is only used by the NBT (NetBIOS over TCP/IP) interface.
-LMHOSTS file contains some valuable additions to the LAN Manager and Windows for Workgroups
-LMHOSTS file, such as the ability to support routed domain logon validation.
-LMHOSTS contains static information about TCP/IP addresses, but using logon scripts and/or the replicator service, the "master" file can be distributed transparently across all stations.
-By default, the LMHOSTS file should be located in the directory %SYSTEMROOT%\SYSTEM32\DRIVERS \ETC (usually C:\WINNT\SYSTEM32\DRIVERS\ETC).
Other info http://support.microsoft.com/kb/105997
Q3. - (Topic 6)
You have a computer that runs Windows 7.
The computer's hard disks are configured as shown in the following table.
You need to ensure that you can recover the operating system and all the files on the computer if hard disk 0 experiences hardware failure.
What should you do?
A. Use the Backup and Restore tool to create a system image on an external hard disk.
B. Create a restore point for both hard disks.
C. Use the Backup and Restore tool to back up data files for all users.
D. Shrink drive C and then create a new partition.
Answer: A
Explanation: System Image in Windows 7 The new backup utilities in Windows 7 are actually pretty impressive and creating an image will be possible in all versions. Today we take a look at creating a backup image of your machine without the need for a third party utility like Ghost or True Image.
You are just finished installing a fresh copy of Windows 7 on your computer and have it set up to your liking. One of the first things you should do now is create an image of the disc so in the event of a crash you will be able to restore it to its current state. An image is an exact copy of everything on the drive and will restore it back to its current state. It's probably best to create an image when everything is clean and organized on your system. This will make the image file smaller and allows you to restore the system with a smooth running set up.
Q4. - (Topic 2)
Your network consists of a single Active Directory forest.
You have 50 portable computers and 50 desktop computers. All computers have 32-bit hardware.
You plan to deploy Windows 7 and 10 corporate applications to the computers by using a custom image.
You need to prepare for the deployment by using the minimum amount of administrative effort.
What should you do first?
A. On one computer, install Windows 7 and the corporate applications.
B. On one portable computer and one desktop computer, install Windows 7 and the corporate applications.
C. On a server, install and run the Microsoft Assessment and Planning (MAP) Toolkit.
D. On a server, install the Windows Automated Installation Kit (AIK) and run Windows System Image Manager (Windows SIM).
Answer: A
Explanation:
To prepare the reference computer for the user, you use the Sysprep utility with the /generalize option to remove hardware-specific information from the Windows installation and the /oobe option to configure the computer to boot to Windows Welcome upon the next restart. Open an elevated command prompt on the reference computer and run the following command: c:\windows\system32\sysprep\sysprep.exe /oobe /generalize
/shutdown.
Sysprep prepares the image for capture by cleaning up various user-specific and computerspecific settings, as well as log files. The reference installation now is complete and ready to be imaged.
Q5. - (Topic 3)
You have a computer that runs Windows 7.
A user reports that he is unable to access network resources. You run Ipconfig.exe as shown in the IPConfig exhibit. (Click the Exhibit button.)
You open Device Manager as shown in the Device Manager exhibit. (Click the Exhibit button.)
You need to ensure that the user can connect to the network.
What should you do?
A. From Device Manager, enable the network adapter.
B. From Device Manager, update the driver for the network adapter.
C. At a command prompt, run Ipconfig /renew.
D. At a command prompt, run Netsh ip set address "local area connection" dhcp.
Answer: A
Explanation:
IP Configuration should look something like this, if network adapter is enabled.
The icon displayed in Device Manager indicates that network adapter is disabled. Therefore, enable the network adapter.
Q6. - (Topic 1)
You want to prohibit read, write, and execute access to all types of external storage devices.
What computer policy setting do you enable?
A. All Removable Storage: Allow Direct Access In Remote Sessions
B. All Removable Storage Classes: Deny All Access
C. Removable Disks: Deny Read Access
D. Removable Disks: Deny Write Access
Answer: B
Q7. - (Topic 2)
Kim Akers has an administrator account on a computer running Windows 7 Enterprise.
Don Hall has a standard account on the same computer. Both users have Microsoft Office Word and Microsoft Office Excel files saved in their Documents library. Don stores Microsoft Office PowerPoint presentations in a subfolder of his Documents library named Presentations. He also stores digital photographs in his Pictures library.
Don has created a folder called Secret in his Documents library and has encrypted the folder and its contents. He stores confidential files in that folder.
When Don last logged on, he deleted some personal files but did not empty his Recycle Bin.
Kim is logged on to the computer. She has plugged in a USB flash memory device that holds personal files but has not yet copied any of these files to the computer. She has never formatted the flash memory device.
The computer is configured to let Windows decide what files and folders to back up.
Kim opens the Backup And Restore console but does not change any settings. She clicks Backup Now.
Which files are backed up? (Choose all that apply.)
A. The Word and Excel files in Don's Documents library
B. The Word and Excel files in Kim's Documents library
C. The PowerPoint files in Don's Presentation folder
D. The digital photographs in Don's Pictures library
E. The files in Don's Secret folder
F. The files in Don's Recycle Bin
G. The files on Kim's USB flash memory device
Answer: A,B,C,D
Q8. - (Topic 5)
Your company has an Active Directory domain and several branch locations. All sales employees use portable computers that have Windows 7 Enterprise installed.
Employees report that when they travel to different branch locations, documents that must be printed are sent to printers in their home office.
You need to ensure that documents that must be printed are automatically sent to printers at their current locations.
What should you do first?
A. Publish all printers to Active Directory.
B. From Devices and Printers, select Change my default printer when I change networks.
C. From Devices and Printers, select the branch office printer, and then select set as default.
D. Configure alternate IP settings.
Answer: B
Q9. - (Topic 4)
Your company has a server named Server1 that runs Windows Server 2008. Server1 is a Windows Server Update Services (WSUS) server.
You have a computer named Computer1 that runs Windows 7.
Computer1 is configured to obtain updates from Server1.
You open the WSUS snap-in on Server1 and discover that Computer1 does not appear.
You need to ensure that Computer1 appears in the WSUS snap-in.
What should you do?
A. On Server1, open Windows Update then select Check for updates.
B. On Server1, run Wsusutil.exe and specify the /import parameter.
C. On Computer1, open Windows Update and then select Change settings.
D. On Computer1, run Wuauclt.exe and specify the /detectnow parameter.
Answer: D
Explanation:
wuauclt.exeThe wuauclt utility allows you some control over the functioning of the Windows Update Agent. It is updated as part of Windows Update.Detectnow OptionBecause waiting for detection to start can be a time-consuming process, an option has been added to allow you to initiate detection right away. On one of the computers with the new Automatic Update client installed, run the following command at the command prompt: wuauclt.exe /detectnow
Q10. - (Topic 1)
You want to create a 20-GB native VHD called Systemvhd in a folder called Windows 7 on an external U hard disk with the drive designation G:. Which command do you use?
A. create vdisk file=g:\windows7\systemvhd maximum=20000
B. create vdisk file=g:\windows7\systemvhd.vhd maximum=20000
C. create vdisk file=g:\windows7\systemvhd.vhd maximum=20
D. create vdisk file=g:\windows7\systemvhd maximum=20
Answer: B