Cause all that matters here is passing the Microsoft 70-745 exam. Cause all that you need is a high score of 70-745 Implementing a Software-Defined Datacenter (beta) exam. The only one thing you need to do is downloading Pass4sure 70-745 exam study guides now. We will not let you down with our money-back guarantee.
Free demo questions for Microsoft 70-745 Exam Dumps Below:
NEW QUESTION 1
You need to ensure that you can deploy the Hyper-V host servers.
How should you complete the Windows PowerShell commands? To answer, drag the appropriate Windows PowerShell segments to the correct locations. Each Windows PowerShell segment may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation:
NEW QUESTION 2
You administer a Microsoft System Center Virtual Machine Manager (SCVMM) infrastructure. You have a Microsoft Azure subscription.
You must design a backup strategy that meets the following requirements:
*Back up the SCVMM hosts, virtual machines (VMs), and workloads.
*Use a protection agent to perform the backups.
*Automate the backup process.
You need to recommend a backup solution. What should you recommend?
- A. WBAdmin.exe
- B. SCVMM cluster
- C. Microsoft Hyper-V Replica
- D. System Center Data Protection Manager
Answer: D
NEW QUESTION 3
You are securing the servers in Microsoft System Center Virtual Machine Manager (SCVMM).
You must use Network Controller to configure and manage servers that are on the same data plane as your
Software Defined Network (SDN).
You need to configure the protocols and authentication types.
Which protocols and authentication types should you use for each server? To answer, drag the appropriate protocols or authentication types to the correct devices or services. Each protocol or authentication type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation:
References:
https://docs.microsoft.com/en-us/windows-server/networking/sdn/security/nc-security
NEW QUESTION 4
You need to ensure that the existing VMs meet the requirements. What should you do?
- A. Modify the VM disks to Differencing.
- B. Upgrade the VM operating system to Windows Server 2021 Standard edition.
- C. Modify the VM configuration to Generation 2.
- D. Upgrade the VM operating system to Windows Server 2021 Datacenter edition.
Answer: D
NEW QUESTION 5
You must upgrade all Hyper-V clusters that support an upgrade. Which 2 clusters can you upgrade?
- A. Atl-cluster
- B. Det-cluster
- C. Tor-cluster
- D. Dal-cluster
Answer: BD
Explanation:
References:
https://docs.microsoft.com/en-us/system-center/vmm/hyper-v-rolling-upgrade?view=sc-vmm-1807
NEW QUESTION 6
You deploy Microsoft System Center Virtual Machine Manager (SCVMM) and System Center Configuration Manager in an Active Directory Domain Services (AD DS) domain.
You must deploy a Software Defined Networking (SDN) network controller.
You need to create the required AD DS security groups for management users and network controller clients. Which members should you add to each group? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation:
References:
https://docs.microsoft.com/en-us/system-center/vmm/sdn-controller?view=sc-vmm-1801
NEW QUESTION 7
You use Microsoft System Center Operations Manager to monitor System Center Virtual Machine Manager (SCVMM). You establish baselines for the virtualization hosts.
You configure monitors to detect when a system is experiencing problems. You define an alert to report that the threshold value is exceeded.
You need to ensure that Operations Manager sends an email to the SDDCAdmins distribution group when the alert condition occurs.
Which three steps should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation:
NEW QUESTION 8
A company plans to deploy the host guardian service.
You need to ensure that hosts are approved if they match boot sequence and code integrity policies. What should you use with the host guardian service?
- A. TPM-trusted attestation
- B. Admin trusted attestation
- C. Storage spaces direct
- D. Credential Guard
Answer: A
Explanation:
In guarded fabrics configured to use TPM attestation, each host must be configured with a code integrity policy that is trusted by the Host Guardian Service.
TPM-attestation: If your HGS is configured to use TPM attestation, the host servers must:
1. Use UEFI 2.3.1c and a TPM 2.0 module
2. Boot in UEFI mode (not BIOS or "legacy" mode)
3. Enable Secure Boot References:
https://docs.microsoft.com/en-us/system-center/vmm/guarded-deploy-host?view=sc-vmm-1807
NEW QUESTION 9
Your company has two datacenters. You have Windows servers in both locations. The network that connects the datacenters has high bandwidth and low latency.
You are designing a new virtual machine (VM) and storage environment based on servers that run Windows Server 2021. You need to implement a solution that meets the following storage requirements:
Tolerates the failure of a single datacenter.
Ensures zero data loss in the event of a file system failure. Solution: You implement Distributed File System Replication. Does the solution meet the goal?
- A. Yes
- B. No
Answer: B
NEW QUESTION 10
You plan to deploy a new virtual machine (VM) that uses the following components:
Windows server 2021
Microsoft system center virtual machine manager (SCVMM)
Nano Server
You create a Microsoft Hyper-V clustered environment and install SCVMM on a server named server1.
You need to create Nano based server image by using an SCVMM template. The image must contain the SCVMM agent.
Which 3 actions should you perform in sequence? Rearrange the answer in the correct order.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation:
Install the VMM packages offline on an existing Nano Server
If you didn't add the VMM packages when you created the Nano Server VHD, you can install them later, as follows:
1. Copy the VHD/VHDX to a location on a Windows Server 2021 machine. For example: C:\MyNano.vhd.
2. Use PowerShell to install and import the NanoServerPackage provider of the PackageManagement (OneGet) PowerShell module:
Install-PackageProvider NanoServerPackage Import-PackageProvider NanoServerPackage
3. After the provider is installed, you can search and install the VMM packages (VMM agent and Hyper-V),
on the VHD using these cmdlets, where C:\MyNano.vhd
is the location of thNe ano Server based VHD.
Find-NanoServerPackage
Install-NanoServerPackage -Name Microsoft-NanoServer-SCVMM-Package -culture en-US
-ToVhd "C:\MyNano.vhd"
Install-NanoServerPackage -Name Microsoft-NanoServer-SCVMM-Compute-Package
-culture en-US -ToVhd "C:\MyNano.vhd
References:
https://docs.microsoft.com/en-us/system-center/vmm/hyper-v-nano?view=sc-vmm-2021
NEW QUESTION 11
A company has a Microsoft System Center virtual machine manager (SCVMM) environment. The environment includes a software load balancer (SLB) and virtual machine (VMs) that run Network controller.
You need to create a guest cluster. What should you do?
- A. Create a service template
- B. Create a logical network
- C. Deploy a RAS gateway
- D. Create an internal load-balancer virtual IP address
Answer: D
Explanation:
VMM 1801 and later supports guest clustering in SDN through an Internal Load Balancer(ILB) Virtual IP(VIP).
The ILB uses probe ports which are created on the guest cluster VMs to identify the active node. At any given time, the probe port of only the active node responds to the ILB and all the traffic directed to the VIP is routed to the active node. References:
https://docs.microsoft.com/en-us/system-center/vmm/sdn-guest-clusters?view=sc-vmm-1801
NEW QUESTION 12
You manage virtual machine (VM) workloads in an environment that includes the following objects:
*IP address pool
*a software load balancer (SLB) object
*an SLB rule
*a public VIP address
You monitor network traffic logs and observe that a VM does not service requests for the VIP address. You need to configure the virtual network so that traffic is not sent to a VM that is unavailable.
What should you do?
- A. Add a health prob
- B. Change the SLB configuration to use the health prob
- C. Redeploy the SLB rule.
- D. Add support for HTTP keep-aliv
- E. Change the SLB configuration to Enable keep-aliv
- F. Redeploy the SLB rule.
- G. Change the VM IP addresses to public IP addresse
- H. Redeploy the SLB rule.
- I. Change the protocol for the SLB rule to UD
- J. Redeploy the SLB rule.
Answer: A
NEW QUESTION 13
You deploy Microsoft System Center Virtual Machine Manager (SCVMM) and System Center Operations Manager (SCOM). You integrate SCVMM with SCOM.
You need to view the reports for SCVMM.
What are two possible ways to achieve the goal? Each correct answer presents a complete solution.
- A. Launch the SCOM console.
- B. Launch the SCVMM console.
- C. Run the Windows PowerShell cmdlet Get-SCOMMonitor.
- D. Run the Windows PowerShell cmdlet Get-SCOMReportingSetting.
- E. View the Reporting server website for SCOM.
Answer: AE
Explanation:
References:
https://docs.microsoft.com/en-us/system-center/vmm/monitor?view=sc-vmm-1801
NEW QUESTION 14
You need to integrate WSUS with the SCVMM production instance. Which four actions should you perform in sequence?
- A. Mastered
- B. Not Mastered
Answer: A
Explanation:
The required process is as follows:
Add a WSUS server to the VMM fabric
Create and assign update baselines
Scan for update compliance
References:
https://docs.microsoft.com/en-us/system-center/vmm/update-server?view=sc-vmm-1807
NEW QUESTION 15
You need to create the VM network for the development environment.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation:
References:
https://technet.microsoft.com/en-us/library/gg610588(v=sc.12).aspx
NEW QUESTION 16
You manage Microsoft System Center Virtual Machine Manager (SCVMM). You plan to implement a software load balancer (SLB) Multiplexer (MUX).
You need to configure the Microsoft Hyper-V host servers to host the MUX. What should you do?
- A. Configure Windows Server Gateway.
- B. Install the SLB Host Agent on each Hyper-V host.
- C. Configure virtual machine resource metering.
- D. Configure a Remote Access Service gateway.
Answer: B
Explanation:
References:
https://technet.microsoft.com/en-US/library/mt632286.aspx
NEW QUESTION 17
You are an administrator at Contoso ltd. You have a Microsoft system center virtual machine manager (SCVMM) host server with a 10 Gbps network interface card (NIC). The host server is configured for a multi-tenant environment. Contoso, provides three tiers of service of its tenants.
All tenants are configured to use the same virtual network and same virtual switch.
You configure the Maximum Bandwidth (Mbps) and minimum (Mbps) port profiles for each tenant according to their service tier.
Tenants report that they are not receiving the minimum service levels for their service tier. You need to ensure that tenants receive the minimum service levels.
What should you configure?
- A. Minimum Bandwidth (weight)
- B. Minimum Bandwidth (Mbps)
- C. Maximum Bandwidth (Mbps)
- D. Maximum Bandwidth (Weight)
Answer: A
Explanation:
Minimum bandwidth (Weight): Specify a weighted portion of the outbound bandwidth that you want to reserve for this vNIC. This will reserve a weighted portion of the total physical NIC(s) bandwidth based on the total weights reserved by all other vNICs for a particular switch.
References:
https://docs.microsoft.com/en-us/system-center/vmm/sdn-bandwidth-qos?view=sc-vmm-1807
NEW QUESTION 18
You need to configure an SDN network controller for the SCVMM test environment. What should you do first?
- A. In SCVMM, create a dedicated host group for Det-Server3, Det-Server4, and Det-Server5.
- B. In AD DS, create a security group and add Det-Server3, Det-Server4, and Det-Server5.
- C. In AD DS, create a security group and add Det-Server6, Det-Server7, and Det-Server8.
- D. In SCVMM, create a dedicated host group for Det-Server6, Det-Server7, and Det-Server8.
Answer: D
Explanation:
References:
https://docs.microsoft.com/en-us/system-center/vmm/sdn-controller?view=sc-vmm-1801
NEW QUESTION 19
You need to configure the SLB service templates.
To which location should you import each component? To answer, drag the appropriate store locations to the correct components. Each location may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation:
References:
https://docs.microsoft.com/en-us/system-center/vmm/sdn-slb?view=sc-vmm-1801
NEW QUESTION 20
You administer the Microsoft System Center Virtual Machine Manager (SCVMM) infrastructure for an organization. You deploy a software load balancer (SLB).
- A. 200
- B. 202
- C. 300
- D. 302
Answer: A
Explanation:
References:
https://docs.microsoft.com/en-us/windows-server/networking/sdn/manage/configure-slb-and-nat
NEW QUESTION 21
You need to deploy the SDN network controller for the SCVMM test environment.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation:
References:
https://docs.microsoft.com/en-us/system-center/vmm/sdn-controller?view=sc-vmm-1801
NEW QUESTION 22
You deploy Microsoft System Center Virtual Machine Manager (SCVMM). You configure shielded virtual machines (VMs) by using virtual Trusted Platform Modules (vTPM). The shielded VMs are in the existing guarded fabric.
You deploy System Center Data Protection Manager (DPM).
You need to identify the scenarios for which you can use DPM to back up the VMs.
For which two scenarios can you use DPM? Each correct answer presents a complete solution.
- A. shielded VMs not protected with vTPM
- B. Item Level Recovery and Alternate Location Recovery outside of the guarded fabric
- C. Item Level Recovery and Alternate Location Recovery in the guarded fabric
- D. shielded VMs protected with vTPM
Answer: CD
Explanation:
References:
https://docs.microsoft.com/en-us/system-center/dpm/what-s-new-in-dpm-2021?view=sc-dpm-1801
NEW QUESTION 23
You deploy a Microsoft Hyper-V host server and install the Network Controller role. You need to modify the application settings of the Network Controller.
Which Windows PowerShell cmdlet should you run?
- A. Set-NetworkControllerVirtualNetworkConfiguration
- B. Set-NetworkController
- C. Set-NetworkControllerNode
- D. Set-NetworkControllerCluster
Answer: B
NEW QUESTION 24
Your company has two datacenters. You have Windows servers in both locations. The network that connects the datacenters has high bandwidth and low latency.
You are designing a new virtual machine (VM) and storage environment based on servers that run Windows Server 2021. You need to implement a solution that meets the following storage requirements:
*Tolerates the failure of a single datacenter.
*Ensures zero data loss in the event of a file system failure. Solution: You implement offloaded data transfers.
Does the solution meet the goal?
- A. Yes
- B. No
Answer: B
NEW QUESTION 25
......
Thanks for reading the newest 70-745 exam dumps! We recommend you to try the PREMIUM Dumps-files.com 70-745 dumps in VCE and PDF here: https://www.dumps-files.com/files/70-745/ (72 Q&As Dumps)