It is impossible to pass HUAWEI H12-211 exam without any help in the short term. Come to Testking soon and find the most advanced, correct and guaranteed HUAWEI H12-211 practice questions. You will get a surprising result by our Up to date Huawei Certified Datacom Associate-Huawei Networking Technology and Device (HCDA-HNTD) practice guides.

2021 Aug H12-211 torrent

Q191.  (Topic 4) 

Static route configuration key difference between reject and blackhole 

A. sent to reject the routing of packets to be discarded, and not the source host 

B. sent to blackhole routing of packets to be discarded, and not the source host 

C. sent to reject the routing of packets to be discarded, sent to blackhole routing packets are not discarded 

D. sent to blackhole routing of packets to be discarded, sent to reject the routing of the packets are not discarded 

E. sent to reject the routing of packets to be discarded, and the source host 

F. sent to blackhole routing of packets to be discarded, and the source host 

Answer: B,E 


Q192.  (Topic 2) 

Telnet transport protocol port number to use is (). 

A. 23 

B. 24 

C. 8080 

D. 48 

Answer: A 

221.  (Topic 2) 

Subnet mask for the network address of 5.32.0.0 255.224.0.0 network, which is the maximum allowed host address 

A. 5.32.254.254 

B. 5.32.255.254 

C. 5.63.255.254 

D. 5.63.255.255 

Answer: C 


Q193.  (Topic 4) 

On the data link connection identifier DLCI, the following description is correct 

A. Frame Relay in a single physical transmission line to provide multiple virtual circuits, virtual circuit is a different DLCI to distinguish between the 

B. DLCI only in the local interface and directly connected to the end of the interface effective, does not have the overall effectiveness of the 

C. In the Frame Relay network, the different physical interfaces on the same DLCI that is a virtual connection with 

D. Frame Relay network user interface supports up to 1024 virtual circuits, the DLCI range is available to the user 16 to 1007 

Answer: A,B,D 


Q194.  (Topic 4) 

The following configuration command in Frame Relay represents what the meaning of 30 (). 

[RTB-Serial0] fr map ip 10.1.1.2 30 

A. mask 

B. DLCI 

C. Cost 

D. Weight 

Answer: B 


Q195.  (Topic 3) 

Trunk port on the following statements is correct 

A. trunk port can belong to a VLAN 

B. trunk port belongs to VLAN 

C. trunk port is generally used to connect the user's computer port 

D. trunk ports between switches are generally used to connect the port 

Answer: B,D 


H12-211 exam topics

Update H12-211 braindumps:

Q196.  (Topic 3) 

To achieve inter-VLAN communication, the following statements is correct (). 

A. In the L3 switch, can only be achieved through the router configuration arm inter-VLAN traffic routing 

B. the L2 switch, router configuration arm only through the inter-VLAN routing the communication to achieve 

C. In the L3 switch, VLAN interfaces can be configured to achieve three inter-VLAN communication 

D. In the L2 switch, VLAN interfaces can be configured to achieve three inter-VLAN communication 

Answer: B,C 


Q197.  (Topic 4) 

In the PPP link establishment phase is the exchange of messages 

A. IP packets 

B. LCP packets 

C. NCP packets 

D. DHCP packets 

Answer: B 


Q198.  (Topic 4) 

The following features are not part of Frame Relay 

A. Cell length of fixed 

B. is an international standard 

C. Simplification of the X.25 Layer 3 functionality 

D. complete statistical multiplexing at the link layer, a transparent frame transmission and error detection 

Answer: A 


Q199.  (Topic 2) 

Usually by a different characteristic impedance values, the coaxial cable into (). 

A. 25 European coaxial cable 

B. 50 European coaxial cable 

C. 75 European coaxial cable 

D. 100 European coaxial cable 

Answer: B,C 


Q200.  (Topic 4) 

In the RIP cost equals () is not up to 

A. 8 

B. 10 

C. 15 

D. 16 

Answer: D