Pass4sure has the HUAWEI HUAWEI exam questions that with accurate and verified answers. Theyre going to appear from the real HUAWEI H12-211 exam. So taking complete advantage of the HUAWEI H12-211 practice questions and answers, you have to be successful in first attempt. The actual HUAWEI H12-211 training training course is a fantastic instrument to get ready the H12-211 exam. Many of us provide a new limited moment for the free downloadable HUAWEI H12-211 exam dumps after paying. Theres no time to lose! Our HUAWEI H12-211 exam goods are marketed at a discounted price. Look no further far more. Stop in Pass4sure website and also buy the particular HUAWEI HUAWEI exam dumps right currently. You will always be capable of making great improvement during the review of the HUAWEI H12-211 exam.
2021 Sep H12-211 exam answers
Q31. (Topic 3)
In the PPP protocol, you need three-way handshake authentication protocol, it is only transmitted on the network without sending the user name is password authentication protocol
A. PAP
B. CHAP
C. MD 5
D. TCP
Answer: B
Q32. (Topic 4)
A router routing table is as follows:
Routing Tables:
Destination / Mask Proto Pre Cost NextHop Interface
2.0.0.0
/ 8 Direct 0 0 2.2.2.1 Serial0 2.2.2.1/32 Direct 0 0 2.2.2.1 Serial0 2.2.2.2/32 Direct 0 0 127.0.0.1 LoopBack0
3.0.0.0
/ 8 Direct 0 0 3.3.3.1 Ethernet0 3.3.3.1/32 Direct 0 0 127.0.0.1 LoopBack0
10.0.0.0 / 8 Static 60 0 2.2.2.1 Serial0
127.0.0.0 / 8 Static 0 0 127.0.0.1 LoopBack0 127.0.0.1/32 Direct 0 0 127.0.0.1 LoopBack0
At this time when the router from the Ethernet port sent to the 10.1.1.1 host receives a packet, the router how to deal with
A. From forwarding to 2.2.2.1 Serial0
B. forwarded to 2.2.2.1 from Ethernet0
C. forwarded to the target host from Serial0
D. forwarded to the target host from Ethernet0
Answer: A
Q33. (Topic 3)
RTA's Ethernet0 / 0 and the RTB Ethernet0 / 0 connected to the same LAN and turn VRRP, while creating a virtual router, ID is 1, the virtual IP address is 10.1.1.254. RTA's Priority of 200, RTB's Priority is the default. In the RTA there are configured as follows:
[RTA-Ethernet0 / 0] vrrp vrid 1 track Ethernet 1 / 0 reduced 150
The following description is correct:
A. When the RTA detected Ethernet1 / 0 fails, RTA will become the priority of 150
B. When the RTA detected Ethernet1 / 0 fails, RTA priority becomes 50
C. When the RTA detected Ethernet1 / 0 fails, RTB will become the priority of 150
D. When the RTA detected Ethernet1 / 0 fails, RTB will become the Master
Answer: B,D
Q34. (Topic 3)
Building A network administrator wants to divide the host, respectively, and VLAN 5 to VLAN 3, the following statement on the VLAN configuration is correct ().
A. VLAN information is automatically saved in the startup configuration
B. manually create VLAN 3 and VLAN 5, the default VLAN automatically canceled
C. The network administrator can view the global to create a VLAN or VLAN view
D. can be named BUILDING_A two VLAN to the other and in different geographical distinction between VLAN
Answer: C
Q35. (Topic 1)
Which of the following protocol is the data link layer protocol ()
A. PPP
B. HDLC
C. IPX
D. IEEE 802.3
Answer: A,B,D
Renew H12-211 exam guide:
Q36. (Topic 2)
If you want to connect two computers directly via twisted pair, the correct line sequence is
A. Both computers can connect directly through twisted-pair
B. 1 - 1,2 - 2 ,3 - 3 ,4 - 4 ,5 - 5 ,6 - 6 ,7 - 7 ,8 - 8
C. 1 - 3,2 - 6 ,3 - 1 ,4 - 4 ,5 - 5 ,6 - 2 ,7 - 7 ,8 - 8
D. 1 - 2,2 - 1 ,3 - 6 ,4 - 4 ,5 - 5 ,6 - 3 ,7 - 7 ,8-8
Answer: C
Q37. (Topic 2)
FTP protocol is based on which of the following protocols to provide reliable data transmission
A. RTP
B. SIP
C. UDP
D. TCP
Answer: D
Q38. (Topic 3)
Judge: HDLC serial interface can be run through the ip address unnumbered interface LoopBack 0 command to configure the IP address to share with LoopBack 0.
A. True
B. False
Answer: A
Q39. (Topic 4)
Protocol configuration is simple, slow convergence, commonly used in small and medium refers to the network routing protocols ().
A. BGP
B. OSPF
C. ISIS
D. RIP
Answer: D
Q40. (Topic 4)
In the following configuration, the PAP protocol configuration keyword cipher user password is ().
[RTB] interface Serial 0 [RTB-Serial0] link-protocol ppp
[RTB-Serial0] ppp pap local-user huawei password cipher hello
[RTB-Serial0] ip address 10.1.1.2 30
A. Configure the password file using ciphertext
B. authentication, data packets sent in the password ciphertext
C. Both of the above
D. None of the above two
Answer: A