The Secret of JN0-102 free download

New Questions 4

What represents the binary equivalence of 96?

A. 11010100

B. 01100000

C. 11010000

D. 11101010

New Questions 5

-- Exhibit --

user@router> show route

inet.0: 9 destinations, 9 routes (9 active, 0 holddown, 0 hidden)

+ = Active Route, - = Last Active, * = Both

10.10.10.91 /32 *[Direct/0] 00:09:40

>via lo0.0

10.10.10.92 /32 *[OSPF/10] 00:01:50, metric 1

>to 172.16.1.2 via ge-0/0/2.0 100.100.1.0/24 *[Static/5] 00:01:50

Reject

172.16.1.1 /24 *[Direct/0] 00:06:09

>via ge-0/0/2.0

172.16.1.2 /32 *[Local/0] 00:06:09

Local via ge-0/0/2.0

192.168.0.0/16 *[Aggregate/130] 00:00:06

Reject

192.168.0.0/17 *[Aggregate/130] 00:00:06

>to 172.16.1.2 via ge-0/0/2.0 192.168.50.0/24 *[Static/5] 00:00:06

>to 172.16.1.2 via ge-0/0/2.0

192.168.51.0/24 *[Static/5] 00:00:06

>to 172.16.1.2 via ge-0/0/2.0

user@router> show configuration policy-options policy-statement demo {

term 1 { from {

route-filter 192.168.0.0/16 longer accept;

}

then reject;

}

}

user@router> show configuration protocols ospf export demo;

area 0.0.0.0 { interface ge-0/0/2.0;

}

-- Exhibit --

Given the configuration and routing table shown in the exhibit, which routes will be advertised to OSPF neighbors because of the demo policy?

A. 192.168.0.0/16 only

B. 192.168.0.0/17 only

C. 192.168.50.0/24 and 192.168.51.0/24

D. 192.168.0.0/17, 192.168.50.0/24, and 192.168.51.0/24

New Questions 6

What represents the binary equivalence of 207?

A. 11001111

B. 11101011

C. 11010111

D. 11010101

New Questions 7

Your network administrator has asked you to view the real-time interface usage on ge- 0/0/0.

Which command would be used?

A. monitor interface ge-0/0/0

B. traceoptions interface ge-0/0/0

C. debug interface ge-0/0/0

D. monitor usage ge-0/0/0

New Questions 8

What are two valid match criteria for a routing policy? (Choose two.)

A. OSPF area ID

B. prefix list

C. port

D. time-to-live (TTL)

New Questions 9

You have received a default route through BGP from your ISP and you want to redistribute it into OSPF.

Which method will accomplish this?

A. Apply an export policy to OSPF that exports the default route.

B. Apply an import policy to OSPF that imports the default route.

C. Apply the default-network command to OSPF.

D. Apply the redistribute-igp command to BGP.

New Questions 10

Which two characteristics describe the UDP protocol? (Choose two.)

A. limited error checking

B. defined timers

C. no recovery mechanisms

D. three-way handshake

New Questions 11

When attempting to view the OSPF routes in the routing table, you issue the command show route table inet.3 but no OSPF routes are displayed.

What is the problem?

A. The OSPF routes are located in the inet4.0 routing table.

B. The OSPF routes are located in the inet.0 routing table.

C. The OSPF routes are located in the inet.2 routing table.

D. The OSPF routes are located in the inet4.3 routing table.

New Questions 12

You issue the ping interface t1-1/1/0 1.1.1.1 bypass-routing count 1000 rapid command. Which statement is correct?

A. The bypass-routing parameter is used to test the density on the T1 line.

B. The bypass-routing parameter cannot be used on a T1 interface.

C. The bypass-routing parameter allows you to ping a host through an interface that has no route through it.

D. The bypass-routing parameter allows you to ping a local WAN interface without generating any outbound traffic.

New Questions 13

Click the Exhibit button.

Referring to the exhibit, what happens when ping packets are sent to the management interface address of the local router?

A. The ping packets are silently discarded.

B. The ping packets are accepted.

C. An ICMP redirect messages is returned.

D. An ICMP error message is returned.