Top Tips Of Most Recent NS0-160 Free Practice Questions

NEW QUESTION 1
You create SAN volumes with System Manager on a FAS solution.
In this scenario, what are three default settings for these volumes? (Choose three.)

• A. Volumes have inline deduplication enabled.
• B. Volume space guarantee is set to Volume.
• C. Volumes have Snapshot copies disabled.
• D. Volume snapshot reserve is set to 0.
• E. Volume space guarantee is set to None.

Answer: CDE

NEW QUESTION 2
In which scenario would you specifically assign aggregates to SVMs?

• A. to configure an ONTAP system for CIFS and iSCSI
• B. to create SnapMirror peering relationships between SVMs
• C. to prevent a storage administrator from overcommitting an aggregate
• D. to configure an ONTAP system for multi-tenancy

Answer: D

NEW QUESTION 3
Which LIF types are owned by the admin SVMs? (Choose two.)

• A. Node-Management
• B. Cluster
• C. Data
• D. Intercluster

Answer: AD

NEW QUESTION 4
A 2-node switches cluster experiences a node failure.
In this situation, which LIF automatically migrates to a different port?

• A. SAN data LIF
• B. intercluster LIF
• C. NAS data LIF
• D. node management LIF

Answer: C

NEW QUESTION 5
When a write from a SAN host is received, the information is stored within the controller before it is written to the underlying RAID.
In this scenario, which component stores the data?

• A. HBA
• B. FlashCache
• C. Flash Pool
• D. NVRAM

Answer: D

NEW QUESTION 6
A network administrator has configured an upstream switch for LACP.
In this scenario, which action should be performed when the NetApp interface group is created?

• A. Set the type to “static multimode”.
• B. Set the distribution function to “port”.
• C. Set the type to “dynamic multimode”.
• D. Set the distribution function to “IP”.

Answer: B

NEW QUESTION 7
Click the Exhibit button.

You use DNS zone delegation to access an SVM that is set up for on-box DNS to nfs1.netapp.com. You can
ping both lif1 and lif2 by IP address, but you can only ping lif1 by the delegated DNS name nfs1.netapp.com. Referring to the exhibit, what must you do to allow on-box DNS access to lif2?

• A. Modify the DNS zone on lif2 to nfs1.netapp.com.
• B. Modify the firewall policy on lif2 to management.
• C. Configure the name service to allow DNS.
• D. Configure lif2 in the external DNS.

Answer: A

NEW QUESTION 8
Two 100 GB space-reserved LUNs and one 100 GB non-space-reserved LUN were created in System Manager in a 1 TB volume.
In this scenario, how much space has been allocated for writes to the three LUNs?

• A. 1 TB
• B. 300 GB
• C. 100 GB
• D. 200 GB

Answer: D

NEW QUESTION 9
To which three objects on an ONTAP 9.3 cluster would you assign a QoS throughput floor? (Choose three.)

• A. a volume on FAS
• B. a LUN on AFF
• C. a volume on AFF
• D. an SVM on AFF
• E. a file on AFF

Answer: BCE

NEW QUESTION 10
You must expand an existing FAS8200 switchless cluster to a switched cluster and add a new FAS8200 HA pair in the cluster.
In this scenario, which three actions would you perform to expand the cluster? (Choose three.)

• A. Ensure that the switchless-cluster network option is false.
• B. Connect the existing nodes to the cluster switches.
• C. Change the cluster ports for the existing HA pair.
• D. Ensure that the switchless-cluster network option is true.
• E. Join the new HA pair to the cluster.

Answer: ABE

NEW QUESTION 11
Click the Exhibit button.

An administrator needs to configure ports for peering. Referring to the exhibit, which ports should be used?

• A. CDOT93-01:e0a and CDOT93-02:e0a
• B. CDOT93-01:e0e and CDOT93-02:e0e
• C. CDOT93-01:e0d and CDOT93-02:e0d
• D. CDOT93-01:e0f and CDOT93-02:e0f

Answer: D

NEW QUESTION 12
You need to move a FlexVol volume from one SVM to another. In this situation, which command would accomplish this task?

• A. volume create
• B. volume rehost
• C. volume modify
• D. volume move

Answer: B

NEW QUESTION 13
An administrator enabled the iSCSI protocol on an SVM and created a LUN for a Windows 2021 system. After a rescan, the LUN is not visible on the host.
In this scenario, which two statements describe what the administrator must do to solve this problem? (Choose two.)

• A. Create an initiator group (igroup), add the iSCSI IQN, and map the igroup to the LUN.
• B. Create an initiator group (igroup), add the WWPN of the host initiator, and then map the igroup to the LUN.
• C. Disable the ALUA support from the host for the LUN.
• D. Configure the iSCSI service on the Windows 2021 system.

Answer: AC

NEW QUESTION 14
A customer installed an ONTAP cluster. The customer wants to provide data access to host computers and end users.
Which three tasks are required? (Choose three.)

• A. Create a Quality of Service (QoS) policy.
• B. Create an SVM.
• C. Create a LIF.
• D. Create an IPspace.
• E. Create a volume.

Answer: ABC

NEW QUESTION 15
Which two statements are true for mailbox disks per node in an HA pair? (Choose two.)

• A. Six disks are required if the root volume is on a mirrored aggregate.
• B. Two disks are required if the root volume is on a disk shelf.
• C. Four disks are required if the root volume is on a mirrored aggregate.
• D. Eight disks are required if the root volume is on partitioned disks.
• E. One array LUN is required if the root volume is on a storage array.

Answer: BE

NEW QUESTION 16
Which command would you use to enable the ONTAP HA feature?

• A. storage failover modify -enabled true -node *
• B. cluster ha modify -configured true
• C. cluster ha modify –configured false
• D. network options switchless-cluster modify true

Answer: A

NEW QUESTION 17
Click the Exhibit button.

Referring to the exhibit, to where will LIF4 move if you unplug the cable from node02 port e0d?

• A. node01 port e0c
• B. node02 port e0c
• C. node02 port e0d
• D. node01 port e0d

Answer: D

NEW QUESTION 18
What is the purpose of Epsilon?

• A. to monitor cluster health
• B. to be used as a load-balancer for a 2-node cluster
• C. to evaluate the differences in node configurations
• D. to be used as a tie-breaker for a cluster quorum

Answer: D

NEW QUESTION 19
Click the Exhibit button.

Referring to the output shown in the exhibit, which aggregate capacity is available for a volume?

• A. 4TB
• B. 8TB
• C. 3.4 TB
• D. 3.6 TB

Answer: B

NEW QUESTION 20
Your manager asks you to upgrade the ONTAP software that is running on the organization’s FAS8200. The FAS8200 is running ONTAP 9.2 and needs to be upgraded to ONTAP 9.5.
In this situation, what is the minimum number of ONTAP upgrades required to accomplish the task?

• A. 3 upgrades; ONTAP 9.2 > ONTAP 9.3 > ONTAP 9.4 > ONTAP 9.5
• B. 1 upgrade; ONTAP 9.2 > ONTAP 9.5
• C. 2 upgrades; ONTAP 9.2 > ONTAP 9.3 > ONTAP 9.5
• D. 4 upgrades; ONTAP 9.2 > ONTAP 9.2P4 > ONTAP 9.3 > ONTAP 9.4P5 > ONTAP 9.5

Answer: C

NEW QUESTION 21
What are three types of load balancing for multimode groups? (Choose three.)

• A. IP
• B. MAC address
• C. sequential
• D. fixed path
• E. most recently used

Answer: ABC

NEW QUESTION 22
A storage administrator wants to convert a switchless cluster to a switched cluster. You need to determine which switches are supported in ONTAP 9.3.
In this scenario, which tool would satisfy the requirement?

• A. Config Advisor
• B. Hardware Universe
• C. OnCommand System Manager
• D. OnCommand Unified Manager

Answer: B

NEW QUESTION 23
When you use the default SnapMirror policy during transfer of a data protection SnapMirror relationship, what is transferred?

• A. the Snapshot copy that is created by the transfer process and any existing Snapshot copies
• B. the Snapshot copy that is manually created and any existing Snapshot copies
• C. the SnapMirror license
• D. only the existing Snapshot copies

Answer: D

NEW QUESTION 24
Click the Exhibit button.

Using ONTAP 9.5, you are operating with data protection across three sites. The cluster_A and cluster_B systems require synchronous replication. The SVMs on cluster_A also require asynchronous SVM-DR replication to a third site. All replication between all sites must also replicate the SVM configuration.
Referring to the exhibit, which replication technology is supported between cluster_A and cluster_B?

• A. NetApp Data Availability Services
• B. Snap Mirror Synchronous
• C. MetroCluster IP
• D. Foreign LUN Import

Answer: B

NEW QUESTION 25
On your customer’s AFF A700, there are multiple volumes within the aggregate aggr1. Within aggr1, volumes vol1, vol2, and vol3 store similar data, and volumes vol4 and vol5 store unique data.
In this scenario, which feature would improve storage efficiency with the data stored in volumes vol1, vol2, and vol3?

• A. data compaction
• B. postprocess compression
• C. inline aggregate-level deduplication
• D. inline compression

Answer: A

NEW QUESTION 26
......