Exam Code: RCDD (Practice Exam Latest Test Questions VCE PDF)
Exam Name: BICSI RCDD
Certification Provider: BICSI
Free Today! Guaranteed Training- Pass RCDD Exam.

Also have RCDD free dumps questions for you:

NEW QUESTION 1

To accommodate telephone, data, CATV, security and multimedia, a MINIMUM of ______ strands of optical fiber auxiliary disconnect outlet (ADO) cable should be provided.

  • A. Two
  • B. Four
  • C. Five
  • D. Six
  • E. Eight

Answer: B

NEW QUESTION 2

The MINIMUM finished height of access flooring in a general office area is:

  • A. 50 mm (2 in)
  • B. 150 mm (6 in)
  • C. 200 mm (8 in)
  • D. 250 mm (10 in)
  • E. 300 mm (12 in)

Answer: C

NEW QUESTION 3

The impedance of the equipment grounding conductor can only be accurately measured with an instrument known as a(n):

  • A. Volt ohm meter
  • B. Power distribution unit
  • C. Exothermic weld connection
  • D. Ground impedance tester
  • E. Amp calculator

Answer: D

NEW QUESTION 4

What is the expected lumenance value, in watts, of a 200 watt fluorescent lamp after three years?

  • A. 120 watts
  • B. 140 watts
  • C. 160 watts
  • D. 180 watts
  • E. 200 watts

Answer: B

NEW QUESTION 5

All of the following are considered market or regional conditions that can impact construction costs EXCEPT:

  • A. Displacement and relocation
  • B. Construction time frame
  • C. Other large projects in the area
  • D. Seasonal effects on construction costs

Answer: A

NEW QUESTION 6

One advantage of using preconnectorized jumpers and cables is:

  • A. They are less costly than field connectorized connectors
  • B. The cables are more rugged and can handle higher pull tensions
  • C. They come with factory certified quality of terminations
  • D. They require additional engineering time thereby providing a higher degree of reliability
  • E. The technician does not need to be concerned with the water blocking components of the cable

Answer: C

NEW QUESTION 7

Exhibit:
RCDD dumps exhibit
The following diagram represents what type of CATV distribution system?

  • A. Home run
  • B. Trunk and tap
  • C. Video over balanced twisted-pair
  • D. Video over optical fiber

Answer: A

NEW QUESTION 8

Select the appropriate task to complete the section 2.2 of the work breakdown structure below:
* 2. Technician
* 2.1 Install rack
* 2.2 ______
* 2.3 Place fiber
* 2.4 Terminate fiber
* 2.5 Test fiber

  • A. Prepare as-built drawings
  • B. Install connector housing
  • C. Clean/polish connectors
  • D. Specify fiber

Answer: B

NEW QUESTION 9

What is the MINIMUM vertical separation between the top rail of a railroad track and telecommunications facilities placed beneath the track?

  • A. 508 mm (20 in)
  • B. 762 mm (30 in)
  • C. 1020 mm (40 in)
  • D. 1280 mm (50 in)
  • E. 1525 mm (60 in)

Answer: D

NEW QUESTION 10

At the end of the second week of a project, the earned value (EV) of work is $8000 USd and the planned value (PV) of work is $7000 USd. What is true about the project?

  • A. The project is ahead of schedule.
  • B. The project is over budget.
  • C. The project is behind schedule.
  • D. The project is under budget.

Answer: A

NEW QUESTION 11

You have determined that the equipment room (ER) you are designing will be the minimum size of 15 sq m (160 sq ft) and is servicing 80 but architectural changes will add 175 , which will require you to add a horizontal cross-connect (HC). What size should the equipment room (ER) be?

  • A. 18 sq m (193 sq ft)
  • B. 23 sq m (250 sq ft)
  • C. 31 sq m (330 sq ft)
  • D. 37 sq m (400 sq ft)
  • E. 47 sq m (500 sq ft)

Answer: A

NEW QUESTION 12

What is the MOST important aspect of fire alarm signaling?

  • A. Audibility
  • B. Clarity
  • C. Reliability
  • D. Intelligibility

Answer: A

NEW QUESTION 13

When designing a backbone distribution system, you will need to include a telecommunications enclosure (TE). A TE can be defined as a:

  • A. Splice point for copper cabling only
  • B. Point where the backbone cabling interfaces to the horizontal cabling and may be utilized in place of a traditional Telecommunications Room (TR)
  • C. Location for housing building cross-connect cabling only
  • D. Location to house the splice transitioning from outdoor to indoor cabling only
  • E. Facility to store slack copper and fiber cables

Answer: B

NEW QUESTION 14

Which active DAS component is responsible for coupling input signals from donor systems?

  • A. Coupling antenna
  • B. Bidirectional amplifier
  • C. Transceiver
  • D. Receiver

Answer: B

NEW QUESTION 15

When installing underground entrances, no more than ______ 90-degree bends should be included between pulling points.

  • A. One
  • B. Two
  • C. Three
  • D. Four

Answer: B

NEW QUESTION 16
......

P.S. Allfreedumps.com now are offering 100% pass ensure RCDD dumps! All RCDD exam questions have been updated with correct answers: https://www.allfreedumps.com/RCDD-dumps.html (358 New Questions)