Want to know Actualtests ns0-507 Exam practice test features? Want to lear more about Network Appliance NetApp Certified Implementation Engineer - SAN, Clustered Data ONTAP certification experience? Study Downloadable Network Appliance ns0-507 answers to Up to the immediate present ns0-507 questions at Actualtests. Gat a success with an absolute guarantee to pass Network Appliance ns0-507 (NetApp Certified Implementation Engineer - SAN, Clustered Data ONTAP) test on your first attempt.
Q41. ONTAP DSM 4.1 is the multipathing option for which host operating system?
A. VMware ESXi 6.0
B. Redhat Linux 7.0
C. Windows Server 2012R2
D. Oracle Solaris 11
Answer: C
Q42. Your vSphere administrator asked you to create an additional 5GB boot LUN for their new ESX1 installation. To complete this request, you have entered the following CLI commands:
lun create –vserver svm1 -volume boot -lun exsi_1 -size 5G -ostype vmware igroup create - vserver svm1 -igroup esxi_1 -protocol fcp -ostype vmware –initiator 50:01:43:80:05:68:5f: B6
However, the vSphere administrator has reported that they are unable to see the newly configured LUN.
What must you do to solve the problem?
A. Reboot the ES XI server.
B. License the duster for FC.
C. Map your LUN to the igroup.
D. Create a new SAN LIF.
Answer: C
Q43. You are performing storage failover testing on a 2-node FAS2650 cluster named cl01. A Windows Server 2012R2 host has 10 FC LUNs mapped from the cluster. After Cl01-01 takes over Cl01-02, the windows host loses access to all of its LUNs.
Which statement describes what is happening in this scenario?
A. Switch zoning does not exist between the windows initiators and the Cl01-02 targets
B. NPIV is not enabled on the cluster
C. Switch zoning does not exist between the windows initiators and the Cl01-01
D. NPIV is not enabled on the FC switches
Answer: A
Q44. For testing LUN mobility, you are moving a volume that contains a LUN to a different HA pair within the same ONTAP cluster. You want to ensure that the host does not lose access to the LUN that is in the volume being moved.
Which action should be performed to accomplish this task?
A. Create a snapmirror of the volume to the destination.
B. Modify the reporting nodes to add the node of the destination and its HA partner.
C. Verify that the volume has snapshots copies enabled.
D. Verify that is enough free space on the volume that is being moved.
Answer: B
Q45. You want to configure iSCSI on a 4-node cluster that only has NFS configured. You need to guarantee that you have at least two optimized paths per LUN.
In this scenario, what are the minimum number of iSCSI LIF needed?
A. 6
B. 4
C. 8
D. 2
Answer: C
Q46. You need to perform a DR test on a FAS8200 with SAN LUNs using the onboard UTA2 with 16Gb SFP+.
In this scenario, what is the minimum port speed required on the DR Site’s FC switches?
A. 2 Gb
B. 16 Gb
C. 8 Gb
D. 4 Gb
Answer: B
Q47. A 4-node cluster is upgraded from clustered Data ONTAP 8.2 to ONTAP 9.1. LUNs that were created after the upgrade are visible only on the target ports of the node that owns
the LUN and its HA partner. LUNs that were on the system before the upgrade are visible on all target ports. You want all LUNs to have paths only to the owning HA pair.
In this scenario, which non-disruptive action would accomplish this task?
A. Add reporting nodes to the LUNs created on clustered Data ONTAP 8.2
B. Add reporting nodes to the LUNs that were created after the upgrade to ONTAP 9.1
C. Re-create the LUNs that were on the system when clustered Data ONTAP 8.2 was running
D. Reboot the fabric switches one at a time
Answer: A
Q48. You configured a new host and followed all the recommended cabling, configuration, and the best practice guides, However, the host OS is reporting one less path to storage than expected.
In this scenario, which two diagnostic commands would assist in insolating the path to investigate? (Choose two.)
A. fcp status
B. fcp portname show
C. fcp ping-initiator
D. fcp ping-igroup
Answer: C,D