The actual Cisco 200-125 is one of the most popular recognition that is certainly competent at getting most organizations. Suppliers could quickly hire people, should you be Cisco 200-125 licensed. Getting the 200-125 would make your current return to incredibly strong therefore you would be assured of your very good employment, anywhere you go! This kind of recognition would be the imagine numerous qualified and also your work could a great bounce after you have that recognition! Virtually any Cisco would give which you very good growth, no matter where youre! This kind of 200-125 test could acquire all of your concerns concerning working with a very good work therefore you would be assured associated with an fast recognition. The particular test is CCNA Cisco Certified Network Associate CCNA (v3.0). There are plenty of affiliated certification because of this 200-125 test and the other may well try them out inside the Cisco webpage.
2021 Oct 200-125 practice test
Q1. - (Topic 4)
On a corporate network, hosts on the same VLAN can communicate with each other, but they are unable to communicate with hosts on different VLANs. What is needed to allow communication between the VLANs?
A. a router with subinterfaces configured on the physical interface that is connected to the switch
B. a router with an IP address on the physical interface connected to the switch
C. a switch with an access link that is configured between the switches
D. a switch with a trunk link that is configured between the switches
Answer: A
Q2. - (Topic 4)
Refer to the graphic.
A static route to the 10.5.6.0/24 network is to be configured on the HFD router. Which commands will accomplish this? (Choose two.)
A. HFD(config)# ip route 10.5.6.0 0.0.0.255 fa0/0
B. HFD(config)# ip route 10.5.6.0 0.0.0.255 10.5.4.6
C. HFD(config)# ip route 10.5.6.0 255.255.255.0 fa0/0
D. HFD(config)# ip route 10.5.6.0 255.255.255.0 10.5.4.6
E. HFD(config)# ip route 10.5.4.6 0.0.0.255 10.5.6.0
F. HFD(config)# ip route 10.5.4.6 255.255.255.0 10.5.6.0
Answer: C,D
Q3. - (Topic 3)
What is known as "one-to-nearest" addressing in IPv6?
A. global unicast
B. anycast
C. multicast
D. unspecified address
Answer: B
Q4. - (Topic 9)
Which two statements about IPv6 and routing protocols are true? (Choose two.)
A. Link-local addresses are used to form routing adjacencies.
B. OSPFv3 was developed to support IPv6 routing.
C. EIGRP, OSPF, and BGP are the only routing protocols that support IPv6.
D. Loopback addresses are used to form routing adjacencies.
E. EIGRPv3 was developed to support IPv6 routing.
Answer: A,B
Q5. - (Topic 2)
Refer to the exhibit.
The network administrator normally establishes a Telnet session with the switch from host
A. However, host A is unavailable. The administrator's attempt to telnet to the switch from host B fails, but pings to the other two hosts are successful. What is the issue?
A. Host B and the switch need to be in the same subnet.
B. The switch interface connected to the router is down.
C. Host B needs to be assigned an IP address in VLAN 1.
D. The switch needs an appropriate default gateway assigned.
E. The switch interfaces need the appropriate IP addresses assigned.
Answer: D
Refresh 200-125 test engine:
Q6. - (Topic 8)
What occurs on a Frame Relay network when the CIR is exceeded?
A. All TCP traffic is marked discard eligible.
B. All UDP traffic is marked discard eligible and a BECN is sent.
C. All TCP traffic is marked discard eligible and a BECN is sent.
D. All traffic exceeding the CIR is marked discard eligible.
Answer: D
Q7. DRAG DROP - (Topic 4)
Answer:
Q8. CORRECT TEXT - (Topic 9)
A corporation wants to add security to its network. The requirements are:
. Host C should be able to use a web browser (HTTP) to access the Finance Web Server.
. Other types of access from host C to the Finance Web Server should be blocked.
. All access from hosts in the Core or local LAN to the Finance Web Server should be blocked.
. All hosts in the Core and on local LAN should be able to access the Public Web Server.
You have been tasked to create and apply a numbered access list to a single outbound interface. This access list can contain no more than three statements that meet these requirements.
Access to the router CLI can be gained by clicking on the appropriate host.
All passwords have been temporarily set to “cisco”.
The Core connection uses an IP address of 198.18.209.65.
The computers in the Hosts LAN have been assigned addresses of 192.168.78.1 – 192.168.78.254.
host A 192.168.78.1
host B 192.168.78.2
host C 192.168.78.3
host D 192.168.78.4
The Finance Web Server has been assigned an address of 172.22.146.17.
The Public Web Server in the Server LAN has been assigned an address of 172.22.146.18.
Answer: MISSING
Q9. - (Topic 3)
Which three are characteristics of an IPv6 anycast address? (Choose three.)
A. one-to-many communication model
B. one-to-nearest communication model
C. any-to-many communication model D. a unique IPv6 address for each device in the group
E. the same address for multiple devices in the group
F. delivery of packets to the group interface that is closest to the sending device
Answer: B,E,F
Q10. - (Topic 1)
For what two purposes does the Ethernet protocol use physical addresses? (Choose two.)
A. to uniquely identify devices at Layer 2
B. to allow communication with devices on a different network
C. to differentiate a Layer 2 frame from a Layer 3 packet
D. to establish a priority system to determine which device gets to transmit first
E. to allow communication between different devices on the same network
F. to allow detection of a remote device when its physical address is unknown
Answer: A,E