Want to know Ucertify 210-065 Exam practice test features? Want to lear more about Cisco Implementing Cisco Video Network Devices v1.0 certification experience? Study Vivid Cisco 210-065 answers to Latest 210-065 questions at Ucertify. Gat a success with an absolute guarantee to pass Cisco 210-065 (Implementing Cisco Video Network Devices v1.0) test on your first attempt.

2021 Mar 210-065 free practice questions

Q51. A customer has a data and VoIP converged network and would like to add video to this network. Which two key QoS elements should be included in the new network design? (Choose two.) 

A. Configure bandwidth management features to smooth bursty traffic and mitigate end-to-end congestion. 

B. Assign a high priority to transactional traffic to maintain quality of business traffic. 

C. Keep video traffic on the low latency queue and move voice traffic to a lower-priority queue. 

D. Apply bandwidth control features that will guarantee bandwidth for the maximum possible amount of video traffic. 

E. Assign both video and voice traffic to use the highest-priority queue. 

Answer: A,D 


Q52. How would an administrator reset a Cisco VCS Control appliance to the default configuration? 

A. Via the CLI, log in as root and issue the factory-reset command. 

B. Via the CLI, log in as root and issue the reset-defaults command. 

C. Via the web GUI, log in as the administrator, choose Backup and Restore, and click the Factory Reset button. 

D. Hold down the power button for 10 seconds until the light flashes. 

E. Hold down the reset button on the back of the appliance for 10 seconds. 

Answer: A 


Q53. Which three products are compatible with Digital Media Manager? (Choose three.) 

A. Media Delivery Engine 

B. Interactive Experience Client 

C. Show and Share 

D. Cast 

E. Digital Signs 

F. Stadium Vision Director 

Answer: C,D,E 


Q54. Which two methods can be used to set the default call protocol of a Cisco TelePresence endpoint running TelePresence codec firmware? (Choose two.) 

A. Use the GUI and set System > H.323 > Settings > Default Call Protocol > H.323. 

B. Use the CLI command xConfiguration Conference 1 DefaultCall Protocol: H323. 

C. Use the CLI command Conference Default Protocol: H323. 

D. Use the CLI command Default Protocol: H323. 

E. Use the GUI and set Configuration > System Configuration > Conference > DefaultCall > 

H.323. 

Answer: B,E 


Q55. The command xCommand Security FIPSMode Activate is issued to a Cisco TelePresence C-Series codec. Management wants to reverse the effects of this command. Which two methods could be used for this purpose? (Choose two.) 

A. From the touch screen, disable FIPS mode in the Administrator Settings menu. 

B. From the touch screen, perform a factory reset from the Administrator Settings menu. 

C. From the touch screen, disable all security settings from the Administrator Settings menu. 

D. Use SSH to connect to the system and enter the xCommand Security FIPSMode Deactivate command. 

E. Use Telnet to connect to the system and enter the xCommand SystemUnit FactoryReset Init command. 

F. Use SSH to connect to the system and enter the xCommand SystemUnit FactoryReset Confirm: Yes command. 

Answer: B,F 


Abreast of the times 210-065 test preparation:

Q56. Refer to the exhibit. 

A network engineer configures a Cisco Unified Communications Manager and VCS integration via a SIP trunk. Endpoint A is able to conduct video calls to Endpoint B. When Endpoint A attempts to share presentation content with Endpoint B, Endpoint B sees the presentation video on the main screen rather than on the presentation display. What is the cause? 

A. The default MTP telephony payload is incorrect. 

B. The SIP trunk is not running on all active Cisco Unified Communications Manager nodes. 

C. MTP is not forced to be required. 

D. BFCP is not enabled. 

E. The MTP preferred codec is incorrect for content presentation. 

Answer: D 


Q57. A user is currently on a Cisco TelePresence call using a Touch 8 device and would like to change the local screen layout so that the active speaker is in full screen and the other participants are smaller within the picture. Which layout option should the user choose? 

A. Prominent 

B. Overlay 

C. PiP 

D. FullScreen 

Answer: B 


Q58. Refer to the exhibit. 

You have just finished installing a 65-inch dual profile system in a multipurpose room. After powering up the entire system, only one display is used. Using the information in the exhibit, why is the second display not displaying anything from the system? 

A. The Cisco TelePresence profile systems do not support dual display. 

B. The display is not powered on. 

C. The dual display option key has not been input into the codec. 

D. The codec has the appropriate option keys installed, so either the display is not cabled correctly, the codec is configured incorrectly, or there is no input being sent to the display. 

Answer: D 


Q59. A technician is trying to pair a Touch 8 with a Cisco TelePresence SX20 endpoint, but the codec is not automatically listed in the touch panel. What are two possible reasons for this behavior? (Choose two.) 

A. The codec firmware version is below version TC 6.1. 

B. The codec and the Touch 8 are on separate subnets. 

C. Pairing visibility mode is not active on the codec. 

D. The codec is not compatible with a Touch 8 device. 

E. The Touch 8 is connected via the second Ethernet port on the codec. 

Answer: B,C 


Q60. When scheduling a multipoint conference, which three devices are required for the conference to be scheduled and completed successfully? (Choose three.) 

A. Cisco Unified Communications Manager 

B. multipoint control unit 

C. video conferencing endpoints 

D. Cisco Unity Connection 

E. Cisco Unified IM and Presence 

Answer: A,B,C