Cisco 300-175 Exam Dumps 2021

NEW QUESTION 1
Which virtual hardware version is required for a VM to enter the Cisco VM-FEX universal passthrough mode?

• A. Version 5
• B. Version 6
• C. Version 7
• D. Version 8
• E. Version 9

Answer: D

NEW QUESTION 2
You need to design and implement a Cisco UCS 5108 Blade Server Chassis system for a customer.
Which statement about how half-width blades and full-width blades can be used is true?

• A. Only two full-width blades can be installed in the top two slots, and four half-width blades can be installed in the bottom two slots.
• B. Only one full-width blade can be installed in the top slot, and six half-width blades can be installed in the bottom slots.
• C. Half-width blades and full-width blades can be combined in any order.
• D. Half-width blade types and full-width blade types cannot be combined.

Answer: C

Explanation: Mixed blade configurations Allows up to 8 half-width or 4 full-width blade servers, or any combination thereof, for outstanding flexibility.
When configured with the 6324 Fabric Interconnect, only 8 half-width B200 M3 blades are supported. https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/hw/chassis-install-guide/ucs5108_install/
ucs5108_install_chapter_01.htm

NEW QUESTION 3
You plan to configure a Fibre Channel port channel on a Cisco UCS system.
What is the maximum number of port channels and ports per port channel on a Cisco UCS 6200 Series device?

• A. fourFibre Channel port channels and 24 Fibre Channel ports per port channel
• B. eightFibre Channel port channels and 24 Fibre Channel ports per port channel
• C. eightFibre Channel port channels and 16 Fibre Channel ports per port channel
• D. fourFibre Channel port channels and 16 Fibre Channel ports per port channel

Answer: D

Explanation: Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/configuration_limits/2-0/b_UCS_Configurati

NEW QUESTION 4
Drag and drop the fabric interconnect characteristics on the left to the correct Ethernet switching modes on the right.

Answer:

Explanation: Egress server traffic can use more than one uplink port = End-Host Mode
The fabric interconnect denies forwarded traffic between the uplink ports = Switch mode The fabric interconnect runs STP = Switch Mode
vNic are pinned to the uplink ports = End-Host Mode

NEW QUESTION 5
Refer to the exhibit.

You are configuring a Cisco UCS Fabric Interconnect. You associate a blade server to a service profile that has the Testing boot policy. Which statement describes the result of the configuration?

• A. The iSCSI boot was created for the LAN boot policy.
• B. The blade server fails to boot due to a missing configuration line of set order 0.
• C. The blade server first tries to boot by using vHBA3 across the SAN network.
• D. The blade server first tries to boot from the local storage, and if this fails, it boots from vHBA3.

Answer: C

Explanation: Reference:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/2-2/b_UCSM_CLI_Configura

NEW QUESTION 6
Where do you configure the VLAN when provisioning new VLANs in VM-FEX?

• A. vCenter on the port group
• B. Cisco UCS Manager on the port profile
• C. Cisco UCS Manager on the service profile
• D. vCenter on the host

Answer: B

NEW QUESTION 7
To boot from SAN, you must perform which two configurations on a Cisco UCS system? (Choose two.)

• A. Enter the boot LUN and the nWWNs.
• B. Put the boot VSANin a dedicated boot service profile template.
• C. Create a LUN, and allow the server WWPN to have access to the LUN.
• D. Put the server WWPN and the storage array WWPN in the same zone.
• E. Create a dedicated boot VSAN.

Answer: CD

Explanation: Reference:
http://jeffsaidso.com/2010/11/boot-from-san-101-with-cisco-ucs

NEW QUESTION 8
When deploying a dynamic FCoE topology using ECMP, what ancillary technology is used?

• A. Fabricpath
• B. EIGRP
• C. VXLAN

Answer: A

Explanation: Reference:
https://blogs.cisco.com/datacenter/what-is-dynamic-fcoe

NEW QUESTION 9
Which two protocols does the Cisco Integrated Management Controller support for managing standalone Cisco UCS C-Series servers? (Choose two.)

• A. SMASH CLP
• B. IPMIv2
• C. SoL
• D. SNMPv3
• E. Virtual KVM

Answer: BD

Explanation: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series-rack-servers/ata- The IMC supports industry-standard protocols, including Redfish version 1.01, Intelligent Platform
Monitoring Interface Version 2 (IPMI v2), and Simple Network Management Protocol versions 2 and 3 (SNMP v2 and v3). It also provides an open Extensible Markup Language (XML) API and a command-line interface (CLI).

NEW QUESTION 10
For which reason would a user choose UEFI boot over Legacy mode?

• A. To support multiple GPU cards
• B. For checksum verification of the EFI shell
• C. To support 4k boot drives.
• D. To reduce BIOS POST times

Answer: C

NEW QUESTION 11
An admin wants to make sure that for each VLAN added to a vNIC, a static MAC address entry is added to the fabric interconnect. Which setting within Cisco UCS Manager accomplishes this task?

• A. The MAC Register Mode in the network control policy is set to Only Native VLAN.
• B. The MAC Register Mode in the LAN connectivity policy is set to All Host VLANs.
• C. The MAC Register Mode in the network control policy is set to All Host VLANs.
• D. The MAC Register Mode in the LAN connectivity policy is set to Only Native VLAN.
• E. The MAC Register Mode in the link protocol policy is set to All Host VLANs.
• F. The MAC Register Mode in the link protocol policy is set to Only Native VLAN.

Answer: C

NEW QUESTION 12
Refer to the exhibit.

Interface Ethernet 1/30 connects to which type of switch?

• A. an FCoE switch that has NPV enabled
• B. a Fibre Channel switch that has NPV enabled
• C. a Fibre Channel switch that has NPIV enabled
• D. an FCoE switch that has NPIV enabled

Answer: D

Explanation: Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/san_switching/503_n2_1/b_Cisco_n5

NEW QUESTION 13
Which three statements are a result of utilizing org permissions on VLANs within a sub-org? (Choose three.)

• A. VLAN IDs can be defined only once globally.
• B. VLAN IDs can be defined within each sub-org.
• C. VLAN name must match across orgs and sub-orgs.
• D. VLAN name can be different per sub-org.
• E. Sub-org vNICs can utilize parent org VLANs.
• F. Parent org vNICs can utilize sub-org VLANs.
• G. Sub-org vNICs can utilize only parent org native VLANs.

Answer: BDF

NEW QUESTION 14
Which two VMware features must be turned off in the data center cluster for Cisco VM-FEX universal passthrough to operate? (Choose two.)

• A. VMCI
• B. DRS
• C. FT
• D. HA
• E. vMotion

Answer: AC

NEW QUESTION 15
You need to automate the management of servers, networks, and storage on a Cisco UCS system, by using PowerShell.
Which tool should you use?

• A. Cisco UCS Platform Emulator
• B. Cisco UCS Python SDK
• C. Cisco UCS Automation Tool
• D. Cisco UCS PowerTool Suite

Answer: D

Explanation: Reference:
http://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/microsoft-applications-on-ucs/broch

NEW QUESTION 16
What is a true statement concerning automatic Fibre Channel pinning on a Cisco Unified Computing System 62XX Fabric Interconnect?

• A. By default, uplink Fibre Channel interfaces are configured for VSAN trunking.
• B. Using NPV, each downstream server will be pinned to an uplink port that is based on a PIN group.
• C. TheFibre Channel pinning process is implemented differently than end-host MAC address pinning.
• D. With VSAN trunking, the automatic pinning of server traffic to Fibre Channel uplink ports will be based on the server WWN.

Answer: D

NEW QUESTION 17
Which two items represent the features of Call Home on the Cisco Unified Computing System? (Choose two.)

• A. send fault details to Cisco TAC
• B. SNMP trap receiver
• C. syslog
• D. central repository of normalized fault data
• E. send email alerts to administrators

Answer: AE