High quality 300-175 Dumps 2021

NEW QUESTION 1
Which maintenance action releases the assigned chassis ID for future use?

• A. Acknowledge chassis
• B. Reset CMOS
• C. Decommission chassis
• D. Remove chassis

Answer: C

Explanation: Reference: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/22/b_UCSM_GUI_Configura 86ACDE9D13C222A452

NEW QUESTION 2
Open the windows by clicking on the minimized at the bottom of the viewing area. Windows can be minimized by clicking on the [X], repositioned by dragging the title bar, and resized by using the handle at the lower right corner to customize the viewing area.
If you are required to access the devices to complete this scenario, the mouse cursor will use a hand symbol when moved over device icons. Clicking the icon will open a device terminal so you can interact with the hardware.
Open the Questions window and begin by clicking a question number. When you have completed answering all questions, click Done to continue.
Scenario
Use your UCS knowledge on Adapter errors ………………………………………configurations.

Current Adapter Connected Status is?

• A. Operable
• B. Down
• C. Inoperable
• D. Unknown

Answer: D

NEW QUESTION 3
You plan to configure a SAN boot from the iSCSI storage of a Cisco UCS system. Which statement about an iSCSIvNIC is true?

• A. All iSCSI data traffic is carried over the vNIC after the boot.
• B. An iSCSIvNIC is an iBFT configuration placeholder for the iSCSI boot configuratio
• C. The vNIC exists only during the startup phase.
• D. Only iSCSI control date traffic is carried over the vNIC after the boot.
• E. An iSCSIvNIC is an iBFT configuration placeholder for the iSCSI boot proces
• F. The vNIC exists during and after the startup phase.

Answer: A

NEW QUESTION 4
Which two of the following are prerequisites when configuring a server to use SAN boot? (Choose two.)

• A. A virtual media device must be accessible from the server
• B. The global boot policy must be attached to a service profile template.
• C. The local disk must be the primary disk in the boot order.
• D. A boot LUN must contain an installation of an operating system
• E. The Cisco UCS domain and the SAN storage device must be able to communicate

Answer: DE

NEW QUESTION 5

Answer:

Explanation: Unknown

NEW QUESTION 6
Which item describes the failure scenario called a "split-brain" in the Cisco Unified Computing System?

• A. Failure of the Cisco Unified Computing System L1-L2 network
• B. Failure of a Cisco Unified Computing System Chassis Management Controller
• C. Failure of a Cisco Unified Computing System I/O module
• D. Failure of a Cisco Unified Computing System Fabric Interconnect
• E. Failure of a Cisco Unified Computing System Chassis Management Switch

Answer: A

NEW QUESTION 7
In order to manually boot from the FlexFlash SD card, which boot option must be in the boot policy used in the service profile?

• A. FlexFlash state
• B. remote virtual drive
• C. remote boot
• D. SD card

Answer: D

Explanation: Topic 2, Exam Set 1

NEW QUESTION 8
Which statement about an iSCSIvNIC when it is created with an overlay NIC is true?

• A. It can have any VLAN allowed on it.
• B. It can be assigned a unique MAC address.
• C. It can have a unique pin group assigned to it.
• D. It can have only the overlays native VLAN associated to it.

Answer: D

NEW QUESTION 9
When upgrading a standalone Cisco UCS C-Series server, which method is correct?

• A. direct upgrade on all components
• B. Cisco Hardware Upgrade Utility
• C. Cisco Host Upgrade Utility
• D. Cisco Server Upgrade Utility

Answer: C

NEW QUESTION 10
What is true statement concerning port personalities on the Cisco Unified Computing System 62XX Fabric Interconnect?

• A. Fibre Channel uplink ports must operate in Fibre Channel switching mode.
• B. The fabric interconnects use native FCoE storage ports to directly attach to the SAN infrastructure.
• C. By default, all Fibre Channel ports are unconfigured.
• D. The Fibre Channel uplink ports do not support VSAN trunking and Fibre Channel port channels.
• E. The Fibre Channel storage ports support VSAN trunking and Fibre Channel port channels.

Answer: C

NEW QUESTION 11
Refer to the exhibit.

You bind the service profile to the updating template. You plan to update the template. Which impact on the service profile when you update the template is true?

• A. Changes to the service profile are locked after the profile is created.
• B. The update to the service profile fails.
• C. The service profile must be updated manually.
• D. The service profile is updated automatically.

Answer: A

NEW QUESTION 12
Which statement about high-availability clusters for Cisco UCS Fabric Interconnects is true?

• A. Peers in a cluster must connect to each other by using two 10-Gbps links.
• B. The cluster requires a minimum of two IP addresses.
• C. The management plane is active/standby.
• D. The data plane is active/standby.

Answer: C

Explanation: Reference:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/20/b_UCSM_GUI_Configura

NEW QUESTION 13
Which technology makes VM-FEX possible?

• A. VXLAN
• B. VNTAG
• C. VPC
• D. DVS

Answer: B

NEW QUESTION 14
Which ports can access the Cisco IMC if you select Shared LOM NIC mode in the Cisco IMC Configuration Utility for a Cisco UCS C-Series server?

• A. The ports on an installed Cisco network adapter card
• B. The two 1-Gb Ethernet ports
• C. The two 10/100 management ports
• D. The two 10/100 management ports, but each port has a default setting

Answer: B

NEW QUESTION 15
A network administrator has configured all required settings for the Smart Call Home feature in Cisco UCS. What must be done next?

• A. Open a TAC case to verify contract information and start the registration process.
• B. Generate a fault to initiate a message that will start the registration process.
• C. The system automatically starts the registration process and no further action is required.
• D. Send a system inventory message to start the registration process.

Answer: D

NEW QUESTION 16
Which Cisco UCS B-Series Blade Server is capable of RAID 5?

• A. B200
• B. B250
• C. B230
• D. B440

Answer: D

Explanation: B200 2 Bays
B250 2 Bays
B230 2 BaysB440 4 Bays
The only server that could possibly support RAID 5 is the B440 Reference:
https://en.wikipedia.org/wiki/Standard_RAID_levels#RAID_5 RAID 5 requires at least 3 disks.

NEW QUESTION 17
Which two are true concerning the role-based access control specifics of a Cisco Unified Computing System? (Choose two.)

• A. Disabled local user accounts are deleted from the database.
• B. A locally authenticated user account is any user account that is authenticated through LDAP, RADIUS, or TACACS+.
• C. If a user maintains a local user account and a remote user account simultaneously, the roles that are defined in the local user account override those that are maintained in the remote user account.
• D. By default, user accounts expire after 90 days; a warning message will be generated 10 days prior to expiration.
• E. A user that is assigned one or more roles will be allowed the privileges that are consistent across all of the assigned roles.
• F. All roles include read access to all configuration settings in the Cisco Unified Computing System domain.

Answer: CF