Our pass rate is high to 98.9% and the similarity percentage between our 70 410 dumps pdf study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Microsoft 70 410 dumps pdf exam in just one try? I am currently studying for the Microsoft 70 410 practice exam exam. Latest Microsoft braindumps 70 410 Test exam practice questions and answers, Try Microsoft 70 410 installing and configuring windows server 2012 Brain Dumps First.
Q1. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The network contains a server named Server1 that runs Windows Server 2012 R2 and a server named Server2 that runs Windows Server 2008 R2 Service Pack 1 (SP1).Server1 and Server2 are member servers.
You need to ensure that you can manage Server2 from Server1 by using Server Manager.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Install Remote Server Administration Tools on Server1.
B. Install Windows Management Framework 3.0 on Server2.
C. Install the Windows PowerShell 2.0 engine on Server1.
D. Install Microsoft .NET Framework 4 on Server2.
E. Install Remote Server Administration Tools on Server2.
Answer: B,D
Explanation:
To be able to fully manage remote servers that run Windows Server 2008 or the R2 Service Pack 1 operating system, you should install the .NET Framework 4 on Server2 first followed by the Windows Management Framework 3.0.
Q2. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1. Server1 runs Windows Server 2012 R2.
You need to create a 3-TB virtual hard disk (VHD) on Server1.
Which tool should you use?
A. New-StoragePool
B. Diskpart
C. File Server Resource Manager (FSRM)
D. New-StorageSubsytemVirtualDisk
Answer: B
Explanation:
You can create a VHD from either the Disk Management snap-in or the command line (diskpart). From the DiskPart command-line tool at an elevated command prompt, run the create vdisk command and specify the file (to name the file) and maximum (to set the maximum size in megabytes) parameters. The following code demonstrates how to create a VHD file at C:\vdisks\disk1.vdh with a maximum file size of 16 GB (or 16,000 MB). DiskPart Microsoft DiskPart version 6.1.7100 Copyright (C) 1999-2008 Microsoft Corporation. On computer: WIN7 DISKPART> create vdisk file="C:\vdisks\disk1.vhd" maximum=16000
Q3. - (Topic 2)
You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1.
You need to add a graphical user interface (GUI) to Server1.
Which tool should you use?
A. The setup.exe command
B. The dism.exe command
C. The imagex.exe command
D. The Add-WindowsPackage cmdlet
Answer: B
Explanation:
The DISM command is called by the Add-WindowsFeature command. Here is the systax for DISM:
Dism /online /enable-feature /featurename:ServerCore-FullServer /featurename:ServerGui-Shell /featurename:Server-Gui-Mgmt
Q4. - (Topic 3)
You have two servers named Server1 and Server2. Both servers run Windows Server 2012 R2. The servers are configured as shown in the following table.
The routing table for Server1 is shown in the Routing Table exhibit. (Click the Exhibit button.)
From Server1, you attempt to ping Server2, but you receive an error message as shown in the Error exhibit. (Click the Exhibit button.)
You need to ensure that you can successfully ping Server2 from Server1. What should you do on Server1?
A. Disable Windows Firewall.
B. Modify the subnet mask.
C. Modify the DNS settings.
D. Modify the default gateway settings.
Answer: D
Explanation:
Route is used to view and modify the IP routing table. Route Print displays a list of current routes that the host knows. Default gateways are important to make IP routing work efficiently. TCP/IP hosts rely on default gateways for most of their communication needs with hosts on remote network segments. In this way, individual hosts are freed of the burden of having to maintain extensive and continuously updated knowledge about individual remote IP network segments. Only the router that acts as the default gateway needs to maintain this level of routing knowledge to reach other remote network segments in the larger inter network. In order for Host A on Network 1 to communicate with Host B on Network 2, Host A first checks its routing table to see if a specific route to Host B exists. If there is no specific route to Host B, Host A forwards its TCP/IP traffic for Host B to its own default gateway, IP Router 1.
The Default Gateway specifies the IP address of a router on the local subnet, which the system will use to access destinations on other networks. If the default gateway settings are not properly configured, then there can be no successful connection.
Reference:
Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 6: Network Administration, Lesson 4: Configuring IPv6/IPv4 Interoperability, p. 269
Q5. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 R2 installed.
You have configured a server, named ENSUREPASS-SR07, as a VPN server. You are required to configure new firewall rules for workstation connections.
You want to achieve this using the least amount of administrative effort.
Which of the following actions should you take?
A. You should consider making use of the Enable-NetFirewallRule cmdlet.
B. You should consider making use of the New-NetFirewallRule cmdlet.
C. You should consider making use of dism.exe from the command prompt.
D. You should consider making use of dsadd.exe from the command prompt.
Answer: B
Explanation:
New-NetFirewallRule – Creates a new inbound or outbound firewall rule and adds the rule to the target computer. You can’t Enable what doesn’t exist yet… you must use New-NetFirewallRule
Q6. HOTSPOT - (Topic 2)
You have a server named Server 1.Server1 runs Windows Server 2012 R2.
Server1 has two network adapters and is located in a perimeter network. You need to install a DHCP Relay Agent on Server1. Which node should you use to add the DHCP Relay Agent? To answer, select the
appropriate node in the answer area.
Answer:
Q7. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 installed.
You have been instructed to modify an Active Directory computer object.
Which of the following actions should you take?
A. You should consider making use of the Get-ADComputer Windows PowerShell cmdlet.
B. You should consider making use of the Set-ADComputer Windows PowerShell cmdlet
C. You should consider making use of the New-ADComputer Windows PowerShell cmdlet
D. You should consider making use of the Get-ADComputerServiceAccount Windows PowerShell cmdlet
Answer: B
Explanation:
Set-ADComputer – Modifies an Active Directory computer object.
Q8. - (Topic 3)
Your network contains an Active Directory forest that contains three domains. A group named Group1 is configured as a domain local distribution group in the forest root domain. You plan to grant Group1 read-only access to a shared folder named Share1. Share1 is located in a child domain.
You need to ensure that the members of Group1 can access Share1.
What should you do first?
A. Convert Group1 to a global distribution group.
B. Convert Group1 to a universal security group.
C. Convert Group1 to a universal distribution group.
D. Convert Group1 to a domain local security group
Answer: B
Q9. - (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.
On a server named Server2, you perform a Server Core Installation of Windows Server 2012 R2. You join Server2 to the contoso.com domain.
You need to ensure that you can manage Server2 by using the Computer Management console on Server1.
What should you do on Server2?
A. Install Windows Management Framework.
B. Run sconfig.exe and configure Remote Server Administration Tools (RSAT).
C. Install Remote Server Administration Tools (RSAT).
D. Run sconfig.exe and configure remote management.
Answer: D
Explanation:
In Windows Server 2012 R2, you can use the Server Configuration tool (Sconfig.cmd) to configure and manage several common aspects of Server Core installations. You must be a member of the Administrators group to use the tool. Sconfig.cmd is available in the Minimal Server Interface and in Server with a GUI mode.
References: http://technet.microsoft.com/en-us/library/jj647766.aspx Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 2: Deploying servers, p. 80
Q10. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1.Server1 runs Windows Server 2012 R2.
You create a group Managed Service Account named gservice1.
You need to configure a service named Service1 to run as the gservice1 account.
How should you configure Service1?
A. From Services Console configure the recovery settings
B. From a command prompt, run sc.exe and specify the config parameter
C. From Windows PowerShell, run Set-Service and specify the -PassThrough parameter
D. From a command prompt, run sc.exe and specify the sdset parameter
Answer: B
Explanation:
Sc config, Modifies the value of a service’s entries in the registry and in the Service Control
Manager database.
obj= {<AccountName> | <ObjectName>}
Specifies a name of an account in which a service will run, or specifies a name of the
Windows driver object in
which the driver will run. The default setting is LocalSystem.
password= <Password>
Specifies a password. This is required if an account other than the LocalSystem account is
used.