Act now and download your ASQ CSSBB test today! Do not waste time for the worthless ASQ CSSBB tutorials. Download Renewal ASQ Certified Six Sigma Black Belt exam with real questions and answers and begin to learn ASQ CSSBB with a classic professional.
Online CSSBB free questions and answers of New Version:
NEW QUESTION 1
The team development stage characterized by expression of individual opinions and ideas often without regard for team objectives is known as:
- A. performing
- B. norming
- C. conflicting
- D. storming
- E. brainstorming
Answer: D
NEW QUESTION 2
The team in the above problem draws arrows from Post-It® notes that are causes to notes that are the effects of these causes. This step is best described by which approach to problem solving?
- A. Affinity diagram
- B. Inter-relationship digraph
- C. Tree diagram
- D. Process decision program chart
- E. Matrix diagram
- F. Prioritization matrix
- G. Activity network diagram
Answer: B
NEW QUESTION 3
SCENARIO A Six Sigma team is measuring the moisture content of corn starch as it leaves the conveyer belt of a dryer. They collect one sample four cups of starch at times indicated in the chart at fixed locations labeled A, B, C, and D across the end of the belt. See the diagram below.
After some work on the dryer, additional data are collected which when plotted looks like this:
Which type of variation dominates?
- A. within sample
- B. sample to sample within the hour
- C. hour to hour
- D. none of the above
Answer: B
NEW QUESTION 4
There are 14 different defects that can occur on a completed time card. The payroll department collects 328 cards and finds a total of 87 defects. DPU =
- A. 87 ÷ 328
- B. 87 ÷ (328 × 14)
- C. 14 ÷ 87
- D. 87 ÷ 14
- E. 328 ÷ 87
- F. 87 × 1,000,000 ÷ (14 × 328)
Answer: A
NEW QUESTION 5
When Tricia empties a box of capacitors she places it at a designated spot on her work table. Sam notices the empty box and brings a full box of capacitors from the stock room. This is an example of:
- A. visual factory
- B. kanban
- C. poka-yoke
- D. standard work
- E. set up time reduction (SMED)
Answer: B
NEW QUESTION 6
Calculate the main effect of factor A (i. e. A+ – A– ).
- A. 46
- B. 129
- C. 83
- D. –46
- E. none of the above
Answer: E
NEW QUESTION 7
An x-bar control chart has been established with control limits of 3.245 and 3.257, n = 5. An engineer collects the following sample and plots the average on the control chart: 3.257, 3,256, 3. 258, 3.259
- A. the process is out of control
- B. the process is not out of control
- C. the engineer misused the control chart
- D. the control limits are incorrect
Answer: C
NEW QUESTION 8
What percent of population falls below the lower specification limits?
- A. 9.18%
- B. 22.66%
- C. 6.68 %
- D. 1.83%
Answer: A
NEW QUESTION 9
If the value of the test statistic had been 0.185, what action should have been taken regarding the null hypothesis?
- A. rejected
- B. accepted
- C. none of the above
- D. all of the above
Answer: C
NEW QUESTION 10
Intuitively, which factor A or B seems most likely to be significant?
- A. A
- B. B
- C. C
- D. neither
- E. both about equally significant
Answer: A
NEW QUESTION 11
A and B are events. P(A) = 0.80 and P(B) = 0.90.
- A. events A and B are disjoint or mutually exclusive
- B. events A and B are not disjoint or mutually exclusive
- C. P(A and B) = 0
- D. P(A and B) = 1.7
Answer: B
NEW QUESTION 12
A population of size 1,000,000 has mean 42 and standard deviation 6. Sixty random samples, each of size 15 are selected. According to the Central Limit Theorem the distribution of the sixty sample means has a standard deviation of approximately:
- A. 6
- B. 6/42
- C. 6/15
- D. 6/ 15
- E. none of the above
Answer: D
NEW QUESTION 13
SCENARIO A Six Sigma team is measuring the moisture content of corn starch as it leaves the conveyer belt of a dryer. They collect one sample four cups of starch at times indicated in the chart at fixed locations labeled A, B, C, and D across the end of the belt. See the diagram below.
Find the sample linear correlation coefficient and the sample coefficient of determination for the data in problem VI.11.
- A. 0.83, 0.69
- B. 0.49, 0.24
- C. 0.74, 0.55
- D. 0.33, 0.11
Answer: B
NEW QUESTION 14
Is this a left-tail, right-tail or two-tail test?
- A. no
- B. left-tail
- C. right-tail
- D. two-tail
Answer: C
NEW QUESTION 15
Find the value of (8) in the ANOVA table. Assume:
- A. 16.4
- B. 3.2
- C. 18.6
- D. 23.2
- E. 4.54
- F. 12.2
- G. 0.525
- H. 2.82
- I. 1.48
- J. 35.4
- K. 0.10<P<1
- L. 0.05<P<0.10
- M. 0.01<P<0.05
- N. 0.005<P<0.01
- O. 0<P<0.005
Answer: O
NEW QUESTION 16
Data are collected in xy pairs and a scatter diagram shows the points are grouped very close to a straight line that tips down on its right hand end. A reasonable value for the coefficient of correlation is:
- A. .8
- B. –.9
- C. 1
- D. 1.3
- E. –1.8
Answer: C
NEW QUESTION 17
TRIZ is an acronym which refers to:
- A. a set of problem solving tools
- B. an organization of quality professionals
- C. an experiment using transitional results
- D. a Russian general responsible for creative thinking
Answer: A
NEW QUESTION 18
A team wants a technique for determining and displaying priorities based on frequency of various defect types. They should use:
- A. written and diagrammed work instructions
- B. flow charts and process maps
- C. cause and effect diagrams
- D. Pareto chart
- E. relationship matrix
Answer: D
NEW QUESTION 19
This QFD matrix was used in the design process for a ball point pen. What symbol is appropriate for the square labeled 9?
A.
B.
C.
- A. none of the above
Answer: D
NEW QUESTION 20
In an experimental design context, replication refers to:
- A. duplicating experimental results at another location
- B. repeating a test with the same factor levels
- C. obtaining the same or similar results from different factors
- D. repeating an experiment but using at least one different factor level
Answer: C
NEW QUESTION 21
This QFD matrix was used in the design process for a ball point pen. What symbol is appropriate for the square labeled 6?
A.
B.
C.
- A. none of the above
Answer: B
NEW QUESTION 22
Calculate the main effect of factor A:
- A. 20
- B. 25
- C. 30
- D. 40
- E. none of the above
Answer: A
Explanation:
A factorial experiment can be analyzed using ANOVA or regression analysis[ citation needed]. It is relatively easy to estimate the main effect for a factor. To compute the main effect of a factor "A", subtract the average response of all experimental runs for which A was at its low (or first) level from the average response of all experimental runs for which A was at its high (or second) level.
NEW QUESTION 23
If item A is more likely to be detected than item B which will have the highest Occurrence value?
- A. item A
- B. item B
- C. cannot be determined
Answer: C
NEW QUESTION 24
An important step in determining the VOC is:
- A. establish viable or comprehensive process feedback loops
- B. ascertain the principles that are values of the corporation
- C. identify the customer
- D. measure the virtual operating continuum potential
- E. all of the above
- F. none of the above
Answer: C
NEW QUESTION 25
Calculate the interaction effect:
- A. 20
- B. 25
- C. 30
- D. 40
- E. none of the above
- F. Answer Pending
Answer: F
NEW QUESTION 26
......
P.S. Easily pass CSSBB Exam with 227 Q&As Surepassexam Dumps & pdf Version, Welcome to Download the Newest Surepassexam CSSBB Dumps: https://www.surepassexam.com/CSSBB-exam-dumps.html (227 New Questions)