Examcollection NS0-506 Questions are updated and all NS0-506 answers are verified by experts. Once you have completely prepared with our NS0-506 exam prep kits you will be ready for the real NS0-506 exam without a problem. We have Leading Network Appliance NS0-506 dumps study guide. PASSED NS0-506 First attempt! Here What I Did.
Q33. A customer has recently deployed a clustered Data ONTAP 8.3 system and is trying to mount LUNs to a Windows 2012 Server using the iSCSI protocol. They are using Cisco Nexus 5548 network switches and the network administrator has informed the storage administrator that the ports are set to switchport mode trunk. The storage administrator has also been informed that the host and storage should be using VLAN 400 for iSCSI traffic.When the storage administrator attempts to add the SVM as an iSCSI target, it fails to connect.
What is causing the problem?
A. The storage administrator has not enabled VLAN tagging on the storage ports.
B. Clustered Data ONTAP 8.3 does not support the iSCSI protocol on a VLAN tagged interface.
C. Windows 2012 Server does not support the iSCSI protocol on a VLAN tagged interface.
D. Clustered Data ONTAP 8.3 does not support running iSCSI on a VLAN ID below 1024.
Answer: A
Q34. Microsoft ODX supports which scenario on clustered Data ONTAP 8.3?
A. moving a VHDX with both SMB 3.0 and SAN protocols as either source or destination
B. moving a VHDX from an SMB 3.0 source to an SMB 3.0 destination with no SAN support
C. moving a VHDX from a SAN LUN source to a SAN LUN destination with no SMB support
D. moving a VHDX with both SMB 2.1 and SAN protocols as either source or destination
Answer: D
Q35. Click the Exhibit button.
Referring to the diagram shown in the exhibit, what will happen if PDU-B fails?
A. Both Node A and Node B will remain online and all disk shelves will remain online.
B. Both Node A and Node B will remain online, but all disk shelves will immediately lose power and become inaccessible.
C. Both Node A and Node B willimmediately lose power and become inaccessible.
D. Node A will immediately lose power and become inaccessible. Node B will remain online.
Answer: A
Q36. Which two flags would you use to enable NetApp thin provisioning on a LUN? (Choose two.)
A. –space–reserve enabled –space–allocation enabled
B. –space–reserve enabled –space–allocation enabled
C. –space–reserve disabled –space–allocation disabled
D. –space–reserve disabled –space–allocation enabled
Answer: A,C
Q37. A customer is experiencing slower than expected performance on a database connected to an iSCSI LUN. They are surprised that performance has decreased even though they have upgraded from a 1 GB to a 10 GB switch.
What are three causes for this problem? (Choose three.)
A. Spanning Tree is incorrectly configured on the cluster nodes.
B. There is a faulty cable or SFP in the data path.
C. There is an MTU mismatch between the hosts, controllers, and switch.
D. Flow control is incorrectly set on either the host or controllers.
E. Routing is not set up between the iSCSI and cluster networks.
Answer: A,B,C
Q38. Which resource would you use to search for information about the configurations for NetApp products that work with third-party solutions?
A. Config Advisor
B. Host Utility Kit
C. Interoperability Matrix Tool
D. Clustered Data ONTAP 8.3 SAN Administration Guide
Answer: C
Explanation: Reference:http://hwu-stage.netapp.com/Resources/FundedTools.htm
Q39. Click the Exhibit button.
After mapping the LUN on the cluster, you are not able to see in on the Windows 2012 host.
cl01::>igroup show –instance
Vserver Name: svm1
Igroup Name: ig1-win
Protocol: iscsi
OS Type: Windows
Portset Binding Igroup: -
Igroup UUID: 358338ba-cfd6-
11df-a9ab-123478563412
Initiators: iqn.1991-
05.com.microsoft: host1 (not
logged in)
Referring to the exhibit, what is the problem?
A. An administrator is not logged into the host.
B. The iSCSI target has not been added to the host.
C. The OS type should be windows_2008.
D. The OS type should be windows_gpt.
Answer: B