It is impossible to pass Network Appliance NS0-506 exam without any help in the short term. Come to Actualtests soon and find the most advanced, correct and guaranteed Network Appliance NS0-506 practice questions. You will get a surprising result by our Far out NetApp Certified Implementation Engineer - SAN, Clustered Data ONTAP practice guides.

Q25. A new server has been installed in your environment, but it is unable to see its NetApp boot LUN. You have narrowed the problem down to the zoning on your Cisco switch which has the following configuration:

zone name z_NetAppvsan 400 

memberpwwn 20:00:00:25:b5:c0:ff:ee 

memberpwwn 50:0a:09:84:8d:7c:51:d5

zoneset name zs_NetAppvsan 400 

memberz_NetApp

zoneset activate name zs_NetAppvsan 400

What is the problem with your zoning configuration?

A. The memberdoes not reference the VSAN.

B. The zone and zoneset names do not match.

C. The zoneset was improperly activated.

D. The PWWN for your NetApp LIF is incorrect.

Answer: D


Q26. Which two port personality combinations are valid for the onboard UTA2 ports on a FAS8040 controller?

A. e0e/0e – fc 

e0f/0f – fc

e0g/0g – cna 

e0h/0h –cna

B. e0e/0e – fc 

e0f/0f – cna 

e0g/0g – fc 

e0h/0h –cna

C. e0e/0e – fc 

e0f/0f – fc 

e0g/0g – fc 

e0h/0h –cna

D. e0e/0e – cna 

e0f/0f –cna 

e0g/0g – fc 

e0h/0h – fc

Answer: C


Q27. You configure space-reserved LUNs on thick-provisioned volumes, and you want to guarantee overwrites.

How would you accomplish this task?

A. Set the fractional reserve to 0%.

B. Enable space allocation.

C. Set the fractional reserve to 100%.

D. Disable the fractional reserve.

Answer: A

Explanation: Reference:https://library.netapp.com/ecm/ecm_download_file/ECMP1636035(page 18)


Q28. Click the Exhibit button.

cl01::>igroup show –vserver 

svm1

VserverIgroup Protocol OS 

Type Initiators

--------- ------------- ------

-- --------- -----------------

--------------------

svm1 esx_cluster mixed vmware 

20:00:00:25:b5:11:a0:01,

20:00:00:25:b5:11:b0:01,

iqn.1998-01.com.vmware:esx02 

cl01::>

A customer is provisioning storage for two ESXi hosts using FCoE with CNA adapters. The customer mapped the LUN to the igroup shown in the exhibit. After scanning for new devices, the LUN is only seen by one of the ESXi hosts.

What caused the problem?

A. One of the hosts is added in the igroip via iSCSI IQN.

B. The igroup protocol needs to be configured as FCP.

C. The switch zoning configuration does not include the correct initiators.

D. The LIFs are not on their home ports.

Answer: A


Q29. You are creating a logical diagram foran FCP SAN solution.

You need to show connectivity between which three sets of components? (Choose three.)

A. management port and ACP cabling

B. inter-cluster network ports and hosts

C. hosts and FCP switches

D. hosts and FCoE switches

E. FCP switches and storage controller

Answer: B,D,E


Q30. A customer is configuring their host for FC connectivity to a clustered Data ONTAP storage solution. They have installed a 4 GB FC HBA into the host and connected it with optical cables to an 8 GB FC switch. They have also connected the UTA2 ports from the FAS2552 with 16 GB SFP+ optics installed using optical cables to the switch.

Which two actions will improve host FCP throughput? (Choose two.)

A. replacing the existing 8 GB FC switch with a new 16 GB FC switch.

B. replacing the switch with a 10 GB Ethernet switch

C. adding 16 GB FC HBA and appropriate optics

D. replacing the optical cables with copper TwinAx cables.

Answer: B,C


Q31. A volume with a single LUN shows 30% deduplication savings. However, the output ofdfon the cluster does not show the 30% savings back to the volumeor aggregate.

What is causing this behavior?

A. Volume space guarantee is set to none.

B. Volume space guarantee is set to volume.

C. LUN space reserve is disabled.

D. LUN space reserve is enabled.

Answer: A


Q32. On a Windows 2012 Server, the FC load balance policy is configured using which two utilities? (Choose two.)

A. NetApp OnCommand System Manager

B. Data ONTAP DSM for Windows MPIO

C. Windows MPIO

D. Unified Host Utilities

Answer: B,D

Explanation: Reference:https://library.netapp.com/ecmdocs/ECMP1656700/html/GUID-243B543E-070F- 46E9-9636-6CF8B91EEB82.html